Spaustuko blokas

Stolle stolle

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, plunksnos brūkšnys: 190 mm, veleno greitis (min.): 41 aps./min, veleno greitis (maks.): 1 800 aps./min, bendras svoris: 1 920 kg, ruošinio svoris (maks.): 17 kg, plieno lakšto storis (maks.): 32 mm, sukimo momentas: 250 Nm, stalo aukštis: 900 mm, Used DONAU quick radial drilling machine type DR 32 - fully overhauled by vaumatec in 2022 - equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve table frame load) Technical Data: Drilling capacity (solid): Steel 60/E335 mm Ø 32 (with feed rate 0.20 mm/rev): Cast iron 22 mm Ø 45 Tapping: Steel 60/E355 M26 Tapping: Cast iron 22 M35 Tool holder: MT4 Column diameter: mm Ø 195 Distance spindle nose to table: min./max. mm 260/660 Working table height: mm 900 Quill stroke: mm 190 Todpfjrn Riqex Ag Rsf Column stroke: mm 400 Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Max. spindle torque: Nm 250 Arm mobility, radial: N 25 Arm mobility, axial: N 25 Clamping force, radial: Nm 3500 Clamping force, axial: N 5500 Feed force: N 7500 Max. allowable mass: kg 17 Max. allowable inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the center of the working surface

Sąlyga: naujas, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% compared to the RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump, specifically designed for precision work. Available models: 30t 60t 100t 150t 200t >200t: on request Custom machines: on request Brand new machine! We are also happy to build a custom press to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can also be operated in the traditional electric mode via a lever for both upward and downward movement. For precise tasks (e.g., pressing in bearings, straightening, etc.), the press is also equipped with a hand pump, allowing you to finely control the force manually. Tedpsf Sqckofx Ag Rsf The pressure cylinder is mounted on a movable carriage, allowing it to be shifted laterally. This enables you to make optimal use of the maximum frame passage width. Features: - 150 tons maximum pressing force - Pressure gauge with manometer - 2 operating modes: electric operation or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable working height - Draw chains for easy adjustment of the working height - Sturdy machine frame - Cylinder laterally adjustable (mounted on movable carriage) The press can be tested under power on site. ----- Many other workshop presses in various models, sizes, and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please feel free to contact us; we will be happy to advise you without obligation. The quoted price is net plus 19% VAT. All information subject to change. Europe-wide delivery available! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations take place via telecommunications (email, fax, telephone, message portal), during which we will first provide you with a non-binding quote, along with information about our general terms and conditions and the right of withdrawal including our imprint, before any purchase or contract comes into effect.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2009, Allgemeine Daten Maschinengewicht: 25.000 kg Steuerung Marke: MAZATROL Modell: MATRIX Hauptantrieb Spindeldrehzahlbereich: 12.000 U/min Spindelmotorleistung: 26 kW Tjdpfxowbw A Ee Ag Ref Werkzeugaufnahme: ISO 40 Verfahrwege X-Achse: 630 mm Y-Achse: 510 mm Z-Achse: 560 mm Tisch Außenlänge: 500 mm Außenbreite: 500 mm Tischbelastung: 500 kg Ausstattung Späneförderer: Ja Diese 5-Achs-Maschine Mazak Variaxis 630-5X T wurde 2009 gefertigt und bietet fortschrittliche Möglichkeiten für komplexe Zerspanungsaufgaben. Ideal für den Präzisionsmaschinenbau gewährleistet dieses Vertikal-Bearbeitungszentrum eine zuverlässige Leistung. Nutzen Sie die Gelegenheit, dieses Mazak Variaxis 630-5X T Vertikal-Bearbeitungszentrum zu erwerben. Für weitere Informationen kontaktieren Sie uns gerne. Anwendungsbereiche Fräsen

Sąlyga: naujas, Universalioji frezavimo staklė Gamintojas: OPTimill Modelis: MT 50 Prekės Nr.: 3336005 Būklė: Nauja staklė Eigos: - X ašis: 580 mm - Y ašis: 200 mm - Z ašis: 340 mm Standartiškai komplektuojama su: - 3 ašių skaitmenine indikacija DPA 31 PLUS - Automatinė X ašies pastūma - Ilgas frezos strypas 16 mm - Ilgas frezos strypas 22 mm - Gręžtuvo griebtuvo tvirtinimas B 18 - Dantytasis gręžtuvo griebtuvas 3–16 mm/B 18 - Redukcinis įvorė MK 2 su išstūmimo grioveliu - Redukcinis įvorė MK 3 su išstūmimo grioveliu Tedpfxsbnfxuj Ag Ref - Mašinos šviestuvas - Aušinimo sistema - Eksploataciniai įrankiai - Naudojimo instrukcija

Sąlyga: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Tjdpfx Asu Aa I Seg Rsf Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Sąlyga: naujas, VISIŠKAI NAUJAS T-TIPO MOBILI STOVO FREZAVIMO STAKLĖS HEIDENHAIN TNC 640 skaitmeninis takelio valdymas HEIDENHAIN komplektas (varikliai, matavimo sistemos ir rankinis ratukas) X ašis: 4000 mm Z ašis: 1500 mm Y ašis (skersinis išsiveržimas): 1300 mm V ašis (skersinis stovas): 1000 mm Tedpfjq I Nkbex Ag Rjf Pasukamas stalas (C ašis): 2000 x 2000 mm Maks. leistina apkrova iki 15 000 kg Automatinė universali pasukama galvutė 1° x 1° (pasirinktinai su fiksuota pinole Ø 210 mm) Veleno laikiklis: SK50 DIN 69871/A Veleno apsukos: 6000 aps./min (alyvos aušinimas) Maks. veleno variklio galia: 53 kW IKZ – vidinis aušinimo skysčio tiekimas – 36 bar Greitoji eiga X, Y, V, Z: 30 m/min Pozicionavimo tikslumas: 0,020 mm Pakartojamumo tikslumas: 0,010 mm WZW – įrankių keitiklis: 60 įrankių (keitimas vertikalus/horizontalus) Dviguba vyrių grandinės drožlių transporterė (ilginė kryptis) Perimetrinis korpusas (viršus atviras) Atsakome tik į užklausas iš Vokietijos.

Gamybos metai: 1990, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 3-201065, Maximum material passage in the feed tube: 65 mm for material lengths up to: 3000 mm Tjdpfsdlm Dhsx Ag Ref Feed force steplessly adjustable up to max.: 550 N Loading time approx.: 30 s Electrical connection/power requirement: 380 V / 1.5 kW Space requirement: 5810 x 920 x 1515 mm Weight: 1200 kg

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Technical Data: Cone Rolling Machine Working width: 1050 mm Tedpfxow An Uhj Ag Rsf Max. bending capacity for mild steel St40: 4.0 mm Diameter of conical top roll: 70 - 185 mm Diameter of side and central lower rolls: 105 mm Conical bending device Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tons Condition: Very little used, as new condition The seller does not assume liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any guarantee.

Sąlyga: beveik kaip naujas (naudotas), Donau Donauflex 135 greita radialinė gręžimo staklė Gamintojas: Donau Tipas: Donauflex 135 Pagaminimo metai: 2020 Būklė: Labai gera, naudota, bet kaip nauja Todpfjxcyz Rox Ag Ref Iš karto pristatoma iš sandėlio.

Sąlyga: naujas, Gamybos metai: 2025, gręžimo pajėgumas: 40 mm, gerklės gylis: 1 220 mm, veleno greitis (min.): 110 aps./min, veleno greitis (maks.): 2 900 aps./min, bendras svoris: 1 710 kg, spindelio eiga: 200 mm, veleno tvirtinimas: MK 4, Drilling capacity in St 60: 40 mm Drilling capacity in GG 20: 40 mm Thread cutting (St 60 / GG 20): M 27 / M 36 Tool holder short taper spindle: MK 4 Distance spindle center to column min. - max.: approx. 210 - 1220 mm Clamping surface machine table: approx. 1200 x 510 mm T-slots in machine table: Number x Width: 3 x 18 mm Distance drill spindle – table min. - max.: approx. 375 - 675 mm Distance drill spindle – base plate (= option) min. - max.: approx. 1075 - 1375 mm Todpfetzkmbjx Ag Rsf Spindle stroke: approx. 200 mm Feeds approx. (4): 0.08 - 0.1 - 0.2 - 0.3 mm/rev Main spindle speed range: stepless 110 - 2900 rpm Dimensions (height x width x depth): approx. 2500 x 1200 x 1710 mm Net weight: approx. 1710 kg Drive motor power, spindle: 400 V, 50 Hz, approx. 2.2 / 4.0 kW