šakinis krautuvas

Still RX60-30L/600 / 2021 / Hubhöhe 4.6m / SS / Waage

Būklė: naudotas, Gamybos metai: 2021, veikimo valandos: 991 h, kėlimo aukštis: 4 600 mm, kuro tipas: elektrinis, variklių gamintojas: Elektro, pavaros tipas: automatinis,

Būklė: naujas, Gamybos metai: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to a variety of surfaces. It is a dry finishing process in which a fine powder made from resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged, ensuring even adhesion to the surface and forming a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to provide a clean surface, which is essential for the powder to bond effectively with the substrate and produce a firm, long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spraying Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System Kodswf Dpgjpfx Ab Njdp The powder feed system consists of a hopper or container in which the powder coating material is stored. It usually includes devices such as powder pumps, feed hoses, and powder sieves to deliver the powder from storage to the spray gun. Pretreatment Equipment Pretreatment systems are used to prepare the substrate before powder coating application. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature, allowing the powder to melt, flow, and cure to form a durable surface. The oven typically features a conveyor or racks to transport coated parts through the oven chamber. Exhaust System An extraction system is installed in the facility to remove excess powder, fumes, or volatile compounds generated during the coating process. This helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Būklė: naujas, Gamybos metai: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Effective working area: 1520x3050 mm Max. positioning speed: 120 m/min Max. acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Kdsdpei Ar Ruefx Ab Nsp Repeatability: 0.03 mm/m Max. table load: 1500 kg

Gamybos metai: 2019, būklė: beveik kaip naujas (parodų įrenginys), Complete system – available immediately Powder booth KPZ-4 PSN Automatic washing system (2 zones) Gas oven with recirculation SGS-800 Manual push conveyor Price starting from €99,999.00 net Kjdofnuklepfx Ab Nodp

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Very Good Condition, CE Certified! Kdedpfjwrhxfjx Ab Njp Technical Specifications: >> Year of Manufacture: 2006, Machine No. 348013 >> Fixed angular table >> Infinitely variable spindle speed up to 4,500 rpm >> Infinitely variable feed on 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axes: 5,000 mm/min Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill – SK40 taper >> Hydraulic tool clamping system >> Weight approx. 1,800 kg >> Required space approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Equipment and Accessories: >> Heidenhain TNC 320 CNC control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control operating manual and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered here is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in very good condition. It comes from a facility where it was only occasionally used for training purposes. The control system is very user-friendly. Moreover, the machine features hydraulic clamping both vertically and horizontally. Switching between vertical and horizontal operation is very simple, thanks to the fold-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our location.

Būklė: geras (naudotas), Soehnle Professional 2790 Weighing Terminal Floor Scale 9013 The SOEHNLE 2790 display unit is highly ergonomic and protected according to IP65, making it suitable for use in wet environments without any issues. With only five keys, the SOEHNLE 2790 digital display unit is particularly user-friendly. The integrated functions include On/Off, Tare, Clear Tare, Zeroing, and Print. In addition, the 2790 display unit also features a piece counting function. The SOEHNLE 2790 display unit can be operated not only with the included 230 V power supply, but also independently of the mains for up to 100 hours using batteries. The 20 mm high digital display is backlit when operating on mains power, ensuring excellent readability. For battery operation, an auto-off function can be set to conserve battery life. Soehnle Professional 2790 Weighing Terminal Technical data > Housing made of anodised aluminium with polyamide injection-moulded parts > Dimensions: L 306 x W 77 x H 82.6 mm > Connection for one scale with strain gauge load cells (DMS) > Load cell excitation voltage: 4 V, approx. 67 Hz square wave > Measurement voltage: 0.2 -12 mV > Smallest input signal per verification scale interval: 0.4 µV > Load cell impedance range: 87-1,200 Ω > Load cell connection: 4- or 6-wire > Operating temperature range: -10 to +40°C > Weighing range: 0.1–100,000 kg > Mains operation via plug-in power adapter: Input 230 V AC, 50 Hz, Output 9 VDC, 300 mA > Battery operation for approx. 160 hours using 4 AA batteries (1.5 V) > Auto-off function (adjustable timer) Soehnle 9013 Floor Scale Weighing platform 150x125 cm Up to 1500 kg Ksdpfx Abjd Sfb Io Nedp The floor scale can be operated in a temperature range from -10 °C to +40 °C. Scale is ready for use immediately after installation. Maintenance-free weighing technology by SOEHNLE. You will find more products—new and used—in our shop! International shipping costs on request!

Būklė: naujas, Gamybos metai: 2023, lazerio galia: 8 000 W, Fiber laser machine HLF available from stock, ready for prompt delivery. An identical machine is powered up and available for testing at our facility. Specifications: - Power: 8kW - Sheet size: 3000 x 1500mm - Automatic shuttle table with ball rollers for scratch-free workpiece positioning - Siemens touchscreen control with LAN/USB - Siemens drives - Precitec autofocus Procutter cutting head - Sheet metal measurement - IPG resonator with 8kW / alternatively MAX Photonics Kodpfxjqgcwto Ab Nodp - Small parts conveyor belt Includes: - Warranty - CAD / CAM software - Commissioning - Delivery (within Germany) - Donaldson extraction unit - Training offered This is a stock machine and therefore available at short notice. We have 300+ similar and identical machines powered up across Germany and Europe. Reference visits to existing users are always possible. Call us today!

Būklė: naujas, Welding current: 20 – 60 A Cutting capacity: 1 – 20 mm Open-circuit voltage: 104 V Compressed air connection: min. 4 bar Connected load: 7.9 kW Supply voltage: 400 V Weight: 16 kg Dimensions (LxWxH): 480 x 260 x 360 mm Digital display. Surge protection. Plasma torch. Ground cable. Kdjdpeupxuvofx Ab Nop Pressure regulator with moisture separator. Equipped with IGBT technology. "Supplied without CEE plug."

Gamybos metai: 2022, būklė: naujas, YAWEI HLF Fiber Laser Machine with TOP Specifications - AVAILABLE IMMEDIATELY Laser Power: 8kW Sheet Format: 3000 x 1500 mm automatic shuttle table Siemens touchscreen control with LAN/USB sheet thickness measurement Siemens drives Precitec Auto Focus Procutter cutting head with autofocus IPG YLS resonator with 8kW The machine includes "everything": Kedehturkepfx Ab Njdp 2-year warranty CAD CAM software commissioning Delivery within Germany and operator/software training offered. We even provide on-site assistance with unloading and installation. The machine is brand new and available on short notice. An identical model can be tested under power at our location at any time. Our showroom features various laser machines from our manufacturers in operation, as well as a range of materials for testing. We warmly invite you to visit us and cut your own drawings or materials. We have been the exclusive distributor and service provider for YAWEI machines for 15 years. Call us and visit us! We always have various YAWEI fiber lasers incoming to ensure short delivery times.

Būklė: naujas, Gamybos metai: 2023, lazerio galia: 6 000 W, New Fiber Laser Series HLB – Optimized Equipment Focused on Essentials – Low Acquisition Costs The Max Photonics resonator and Raytools auto-focus cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs. EQUIPMENT: Cutting head: Raytools – auto-focus Resonator: 6kW Automatic pallet changer including light barriers Extraction unit: Welldone CE certified Cypcut control with touchscreen, including online programming directly at the controller Sheet size: 3,000mm x 1,500mm Maximum power connection: 30 kW Installation footprint: approx. 9,000mm x 3,000mm x 2,200mm The machine comes with: - 12 months warranty - Commissioning Kjdpfx Absqt Dcps Nodp - Delivery within Germany - Software and operator training included Optional: Offline Programming CAD/CAM Software Libellula [CUT] Just connect gas and power – ready to use. We have a range of laser machines from our manufacturers under power in our showroom, and various materials available for testing. We cordially invite you to visit us and cut your own drawings or materials. We, H+S, have been an exclusive trading and service partner for YAWEI machines for 15 years, marketing their fiber lasers for approximately 8 years. We have already installed more than 300 YAWEI fiber lasers – see for yourself, also at a site near you. Call us and visit us!