Transporto priekaba, sunkiasvorė priekaba,

Stapler >Center Fritz GmbH TPW 8000 AL - AS

Gamybos metai: 2002, būklė: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS Cpedehzbipjpfx Aahsw 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Būklė: naudotas, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volt, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screw spindles - SICK safety light curtain at front for pinch protection - 3 material support arms with ball rollers - Electric foot switch - Spare blades - Oil cooler with air heat exchanger - Very heavy-duty machine with extremely robust construction Base machine space requirement (L x W x H): 4650 x 2610 x 3200 mm Base machine weight: 27,000 kg Space required for transport (base machine): 4650 x 2610 x 3200 mm Cpedpfxjd Hxx As Aahow Space required for transport (additional): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau; test cuts possible. Currently, the hold-downs are being resealed; the resulting price adjustment will be made in the next few days.

Būklė: naujas, DESCRIPTION Cpsdpfx Aed Ixadsahow DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data - DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction port per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Būklė: naudotas, rida: 101 234 km, kėlimo aukštis: 59 100 mm, Gamybos metai: 2017, veikimo valandos: 1 h, Pavaros tipas: Ratas Codpfx Aaevl Dl Ashspw Tuščias svoris: 48 000 kg Kėlimo galia: 8 000 kg Serijos numeris: Padangų būklė priekyje: 90 Padangų būklė gale: 90 Transportavimo matmenys (I x P x A): 16,85 x 2,75 x 3,99 Dėl išsamesnės informacijos kreipkitės į PFEIFER GROUP.

Būklė: naudotas, Gamybos metai: 2010, Column-mounted slewing crane: mobile Jib length approx. 2,500 mm Machine weight approx. 4 t Load capacity 125 kg Bucket dead weight 430 kg Cpjdpfx Aaemt Rpwehew Minimum bucket fill weight 416 kg Minimum total bucket weight 846 kg Max. wheel load 391 kg Max. support load 544 kg Without documentation/papers.

Gamybos metai: 1972, būklė: paruoštas naudoti (naudotas), The system includes (1) DEMAG TC 140 crane, year of manufacture: 1972, lifting capacity: 50t at 3m radius, slewing range: 360°, support base: 5500mm, drive: pneumatic, hydraulic, electric, operating hours: 7153h. (2) Faun LK 910/483-V vehicle, operating hours: 1214h. An on-site inspection is possible. Cpedpfsuzx T Rjx Aahjw

Būklė: naudotas, rida: 167 000 km, kuro tipas: dyzelinas, spalva: balta, emisijos klasė: Euro 6, Gamybos metai: 2015, Įranga: ABS, diferencialo užraktas, oro kondicionavimas,

Būklė: naudotas, Gamybos metai: 1992, X-axis travel 1400 mm Y-axis travel 1200 mm Z-axis travel 1000 mm ZM control Total power requirement 0.5 kW Machine weight approx. 2 t Space requirement approx. 2 x 1.5 x 2 m Cpsdpeftfczefx Aahow

Gamybos metai: 2020, būklė: beveik kaip naujas (parodų įrenginys), 1x drive unit with chassis 1x idler unit with chassis and height adjustment - Centric roller support adjustment with hand crank. - Manual height adjustment, secured with locking pin - Adjustable height difference: 0–350 mm - Load capacity: 2,500 kg per unit Cpodpsfxgrdofx Aahjw - Workpiece diameter: 200 mm – 2,000 mm - Travel rollers: PUR wheels - Dimensions (L x W): approx. 1,900 mm x 460 mm - Chassis track width: 1,435 mm - Rotation speed: 0 – 2,000 mm/min - Operation: hand-held remote control and foot switch

Būklė: naujas, mašinos/transporto priemonės numeris: 0620, tuščias svoris: 2 800 kg, didžiausias leistinas svoris: 20 000 kg, bendras svoris: 22 800 kg, ašių konfigūracija: 2 ašys, krovimo vietos ilgis: 6 000 mm, krovinių skyriaus plotis: 2 000 mm, krovos erdvės aukštis: 640 mm, padangos dydis: 450x300x305, padang padangų: 100 procentas, Gamybos metai: 2025, darbinė masė: 22 800 kg, Transporto vežimėlis TPW 20 AL-AS Tipas: TPW 20 AL-AS Naudingoji apkrova: 20 000 kg Metai: 2025 Matmenys: Krovinių platformos ilgis: 6 000 mm Plotis: 2 000 mm Aukštis: 620 mm Transportavimo grindys: 40 mm Duglazijos mediena Vairavimas: visų ratų vairavimas su ašies šarnyru Padangos: 450x300 pilnavidurės juostos su plieniniais ratlankiais ir dvipusiais kūginiais guoliais Vilkimo sija: 1 600 mm su 40 mm vilkimo ąsa ir apsaugos nuo nukritimo įrenginiu Dažymas: RAL 2000 Cjdohbh Rtopfx Aahspw Atsparos blokai po 6 vnt. kiekvienoje ilgainėje krovinio tvirtinimui Dvigubo veikimo atrama sumontuota ant rėmo #sunkiasvoris transportas #vidaus transporto sistemos #sunkiasvorių priekabų nuo 6 iki 100 tonų #sunkiasvorių priekabų nuo 3 iki 100 tonų #sunkiasvorių pervežimo platforminiai vežimėliai #platforminiai sunkiasvorės priekabos #visų ratų vairavimas #transporto vežimėlis #žemagrindis