Transporto sparda

Stahl stabile Ausfuehrung

Būklė: naudotas, 3-axle truck trailer, low-bed trailer MÜLLER MITTELTAL type AZP Curtainsider low loader, low-bed trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Crodpfx Ajt N Anton Hoc Gross vehicle weight rating: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at platform height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and sliding tarp advanced) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle is a lift axle - Drawbar – telescopic, adjustable in several stages - Very robust lashing eyes on outer frame and vehicle center - ALU loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge €2,000 net) The vehicle was purchased new by us, i.e. from first ownership. The trailer has been deregistered since 2025.

Gamybos metai: 2025, būklė: naujas, Standard version with column Crjdpfxogn Tzle An Hsc Motorized height adjustment 700 mm Articulated arm length 2 x 1,100 mm Grinding spindle height adjustment 130 mm Grinding motor 5.5 kW Including the following options: + Speed control, spindle speed approx. 250 – 1,000 rpm + Pneumatic grinding pressure support + Bellows cover for column and trapezoidal spindle + Incl. foundation bolts and installation template Grinding tools optionally available Request more information

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1989, An aluminium die casting machine is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mould locking: double toggle lever, shot chamber: cold chamber, orientation: horizontal. Shot plunger diameter min./max.: 40 mm/70 mm, shot chamber fill volume min./max.: 293 cm³/898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm²/338 cm², capacity: 780 cycles/h. Platen dimensions X/Y: 755 mm/755 mm, tie bar distance: 500 mm/500 mm, mould height min./max.: 250 mm/600 mm, min. mould dimensions X/Y: 296 mm/296 mm. Includes crucible furnace, blow-off unit, dosing unit, and 4x control cabinets. Documentation available. Cjdpfx Anoucfwps Hjrc

Būklė: naudotas,

Būklė: naujas, 04P-023-LF 04P-023-RF 004P014-L-A2 004P014-R-A2 004P023-LF-A2 Credpfxef Ddzqj An Hjc 004P023-RF-A2 04P033-LF-A2 04P033-RF-A2 044P-023-011LF 044P-023-011RF 044P049-021-LF-A2 044P049-021-RF-A2 044P049-033-LF-A2 044P049-033-RF-A2 06P-094-LF-A2 06P-094-RF-A2 064P-079-025-LF 064P-079-025-RF 064P118-017-LF-A2 064P118-017-RF-A2 064P135–049–L-M1268 064P135–049–R-M1268 064P-135-049-LF 064P-135-049-RF 064P-148-034-LF 064P-148-034-RF 066P079-L-A1-M1077 066P079-R-A1-M1077 066P094-L-A1 066P094-R-A1 066P-104-031-LF 066P-104-031-RF 066P-118-035-LF 066P-118-035-RF 066P104-056-LF-A1 066P104-056-RF-A1 066P135-L-A1-M1077 066P135-R-A1-M1077 644P 079-037-014-LF-A2 (M1239) 644P 079-037-014-RF-A2 (M1239) 066P135-063-L-A1 066P135-063-R-A1 644P-069-026-014-LF-A2-M1239 644P-069-026-014-RF-A2-M1239 664P118-056-017-L-A2-M929 M1256 664P118-056-017-R-A2-M929 M1256 08P-197-LF 08P-197-RF 086P-197-056-LF 086P-197-056-RF 886P-226-226-104-LF 886P-226-226-104-RF as well as other types, as a package

Būklė: naujas, Dedikuota mašina, skirta tiesios griovelio / išpjovos įvairoje medienos gaminių, naudojamų baldų gamyboje, bendrosiose staliaus dirbtuvėse, sodo baldų, sandėliukų, gegnių ir karkasinių konstrukcijų gamyboje, įpjovimui. Taip pat gali būti naudojama durų rėmų gamybai, gegnių atramų įpjovimui ir rąstinių namų gamyboje. Standartiškai įrengta horizontaliomis pneumo spaustuvėmis ruošiniams bei hidrochekinio amortizatoriaus valdymu, kuris užtikrina tolygų frezos eigos judėjimą. Cjdedy Hm Dopfx An Horc Tikslus rutulinių guolių judėjimas grūdinto plieno kreiptuvais. Tvirta lieto ketaus konstrukcija su plieniniu pagrindu. 3 kW variklis. Didžiausias įrankio skersmuo 250 mm. Įrankio vidinis skylės diametras 40 mm. Frezos variklio rankenėlės aukščio reguliavimas. Didžiausias išpjovos / griovelio gylis – 60 mm. Griovelio / išpjovos plotis – 60 mm per vieną pravažiavimą. Maksimalus įrankio eigos ilgis – 250 mm. 2 horizontalūs ruošinio spaustuvai. Hidrochekinis skersinio pjovimo svirties amortizatorius. Dulkių nutraukimo jungtis – 100 mm. Mašinos stovas.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard Csdpfjh Ek Dasx An Hsrc = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: geras (naudotas), Robust crane system, ideal for glass storage or workshops. Lifting capacity: 3 t Length: 14,250 mm Crjdpfx Aoryv S Aon Hjc Width: 8,500 mm Height: 3,650 mm Maximum hook height: 3,280 mm Maximum construction height: 3,950 mm.

Gamybos metai: 2026, būklė: naujas, NEW - - Ideal for removing panels from your vertical panel storage. - For in-house transport of panels to a vertical or horizontal panel saw. - The continuously adjustable support surface can be precisely aligned to the height of your panel saw. - Panels up to max. 250 kg can be transported or swiveled by a single operator. Cedpfx Anjd Tyaas Hsrc Technical data: Support height - vertical: approx. 120 - 340 mm - horizontal: approx. 890 - 1200 mm Max. panel size: 5200 × 2100 mm Load capacity: 250 kg Location: Available from stock in 54634 Bitburg - immediately available - Shipping within Germany for 90,- Euro net

Būklė: naujas, Gamybos metai: 2020, Clamping force: 600 kN Clamping platen: 460 x 460 mm Tie bar spacing: 300 x 300 mm Clamping stroke: 230 mm Ejector stroke: 70 mm Ejector force: 40 kN Mould height: 120–350 mm Tie bar diameter: 56 mm Injection force: 54 kN Injection stroke: 130 mm Injection piston diameter: 45, 50, 55 mm Casting volume (DIN 24480): 109, 150, 194 cm³ Specific injection pressure: 339, 274, 226 daN/cm² Associated parting surface: 176, 218, 264 cm² Machine weight: approx. 3.5 t Machine equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale/chute 1.1.0 Motorized safety door, casting direction left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Advantage package ejector 2.4.2 Ejector plate lock, mould side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Casting system pre-fill 3.4.5 Simplified injection piston removal 3.4.6 Injection piston stop on return stroke 3.5.2 Electric nozzle and casting pot heating 4.5.0 Hydraulic assembly shut-off device 4.6.1.2 Integrated water circuit control, 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Equipment package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction unit 6.1.4 Serial interface for 4 heating/cooling circuits 6.3.1.1 Operator unit with visualisation on support arm 6.5.2 Equipment package RSD with switch 7.0.0 ADDITIONAL DEVICES 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying programme Cjdpfxeiu Smbe An Herc 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Sound-insulated reject chute OF70 70 Years FRECH – Anniversary Package