Krano lynas Ø 9 mm, 26 m

Stahl Drallarm

Būklė: geras (naudotas), Winch rope, crane rope, hoisting rope, wire rope - Wire rope: Ø 10 mm Kedpfx Asghnbwoauslr - Length: 9.5 m - For electric wire rope hoist - Other crane ropes also available - Price: per spool - Quantity: 7 spools available - Weight: 4 kg per unit

Būklė: naudotas, Gamybos metai: 2007, veikimo valandos: 27 000 h, Funkcionalumas: visiškai funkcionalus, Parduodamos naudotos mobiliosios laužo žirklės. Įrenginį galima apžiūrėti bet kuriuo metu. Kljdpfx Aaoykzv Hsusr

Būklė: naudotas, Winch rope, crane rope, hoisting rope, wire rope -Wire rope: Ø 6 mm -Length: approx. 33 m -Suitable for: electric wire rope hoist -Other crane ropes available Kljdpfx Aeghnd Deauer -Price: per spool -Quantity: 4 units available -Weight: 6 kg

Būklė: geras (naudotas), Winch rope, crane rope, hoisting rope, wire rope - Wire rope: Ø 12 mm - Length: approx. 26 m - Suitable for electric cable hoist - Other crane ropes available - Weight: 15 kg Kedpfxob A S Ihj Aauelr

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 37 656 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 85 t, pildymo angos plotis: 1 500 mm, pildymo angos ilgis: 1 100 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 650 kg, bendras svoris: 25 000 kg, alyvos bako talpa: 1 000 l, paskutinio kapitalinio remonto metai: 2024, tūrio srautas: 410 m³/val, transporto plotis: 2 400 mm, transporto ilgis: 9 300 mm, Good day, We hereby offer you, subject to prior sale, a used baler from the manufacturer Presona AB, type LP 85 VH1. Klodpfxev T I Evs Aausr The following technical data has been taken from the manufacturer’s operating manual and brochures, for which we cannot guarantee the accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific pressing force: 100 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume per cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Strapping: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, foils, and plastics such as bottles, buckets, canisters, and drums. The baler is in good condition. Many wear parts and entire assemblies have already been renewed over the last three years. The machine has been serviced regularly. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH Service Team

Būklė: geras (naudotas), Winch rope, crane rope, hoist rope, wire rope - Wire rope: Ø 15 mm - Length: approx. 25 m - suitable for electric wire rope hoist Kodjb A S Iyspfx Aauolr - other crane ropes also available - Weight: 24 kg

Būklė: naudotas, Winch rope, crane rope, hoisting rope, wire rope Kljdpeghiggefx Aausr - Wire rope: Ø 9 mm - Length: 24 m - Suitable for: electric wire rope hoist - Other crane ropes: available - Weight: 6.5 kg

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, veikimo valandos: 44 590 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 200 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 2 000 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, alyvos bako talpa: 3 100 l, galia: 150 kW (203,94 AG), paskutinio kapitalinio remonto metai: 2025, Technical Data - Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Type: 112 Year of manufacture: 2002, partially overhauled in December 2025 Operating hours: 44,590 hours as of December 2025 Main press force: 200 t Specific pressing force: 16.5 kg/cm² Feed chute dimensions: 2,000 x 1,020 mm Filling volume: 2.65 m³ Theoretical throughput: 795 m³/hour Bale dimensions: 1,100 x 1,100 mm, length adjustable Drive power: 2 x 75 kW Binding: 5-fold horizontal, fully automatic Throughput for MSW: approx. 48 to 54 t/hour, depending on material Hydraulic oil tank capacity: 3,100 L Machine weight, press: approx. 50.8 t Ksdex Dnb Uepfx Aauolr Scope of delivery: 1 unit baler MACPRESSE, type 111A 1 unit operating manual with CE declaration, electrical and hydraulic schematic Remarks: The machine has been serviced and partially overhauled in our workshop. The following work was performed and parts replaced: • Hydraulic oil tank completely drained and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Dismantling of the press ram, complete disassembly, overhaul of the mechanics • Replacement of the front two main guide rollers • Replacement of the knives on the press ram • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, all seals replaced • Replacement of the counter knife in the frame • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame renewed on left and right sides • Worn press floor cut out, bottom plate replaced with wear-resistant HARDOX steel • Dismantling of the tying and twisting unit, complete disassembly, overhaul of the mechanics, replacement of all twister shafts and ball bearings • Replacement of all wire rollers in the needle heads • Wire cutters cleaned and reset, chains lubricated and tensioned • All wire deflection pulleys made operational • All door contact switches replaced • Vibulator dismantled, disassembled and serviced • General maintenance performed Finally, the baler was subjected to a machine test in both manual and automatic modes—see our video for a functional test of the machine. The documentation (operator manual, CE, electrical/hydraulic schematic) is complete. Viewing by appointment is possible. No liability is assumed for the technical specifications or possible errors.

Būklė: naudotas, Winch cable, crane rope, hoisting rope, wire rope - Wire rope: Ø 10 mm - Length: 24.7 m - Suitable for: electric wire rope hoist - Other crane ropes available - Price: per piece - Quantity: 2 pcs Kedpfxeghihwe Aauolr - Weight: 8.9 kg/pc

Būklė: naudotas, Winch rope, crane rope, hoisting rope, wire rope -Wire rope: Ø 9 mm -Length: 22.5 m -Suitable for: electric wire rope hoist Kjdpfjghiiisx Aauolr -Other crane ropes available -Weight: 6.1 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, veikimo valandos: 34 480 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 750 kg, bendras svoris: 19 000 kg, transporto aukštis: 3 300 mm, alyvos bako talpa: 750 l, galia: 45 kW (61,18 AG), Technical Data - Baler: Manufacturer: Bollegraaf Model: HBK 100 Year of manufacture: 2004 Operating hours: 34,480 hours Main press force: 100 t Pre-press force max.: 42 t Feed hopper dimensions: 1,600 x 1,100 mm Filling volume: 3.15 m³ Theoretical cycle time: 22 seconds Theoretical throughput capacity: up to 450 m³/hour Bale dimensions: 1,100 x 720 mm, length variable Drive power: 45 kW Total connected load: 60 kW Tying: 5-fold vertical Throughput rates with a bulk density of: - 30 kg/m³: approx. 13 t/hour - 50 kg/m³: approx. 20 t/hour - 100 kg/m³: approx. 30 t/hour Throughput in air separator operation: approx. 20 t/hour Bale weight: 550 to 750 kg, depending on material Hydraulic oil tank volume: 750 L PLC control: Telemecanique TSX Micro Transport dimensions (press only): 10,900 x 2,320 x 3,300 mm (L x W x H) Machine weight (press): approx. 19 t Kodpoxbgnhefx Aauelr Remarks: Unlike the standard HBC series presses from Bollegraaf, this machine does not have a pre-press flap. Instead, it cuts the material between knives on the press ram and the counter-knife in the frame. Therefore, it is a shear-edge press, similar to those by Paal, unoTech, etc. The press is in very good condition for its age, as it was used exclusively for compacting paper from document destruction. The documentation (operating manual, CE certificate, electrical/hydraulic schematics) is complete. Inspection is possible by appointment. We do not accept liability for technical specifications or possible errors.

Būklė: naudotas, Winch cable, crane rope, hoisting rope, wire rope - Wire rope: Ø 9 mm Kljdpfx Aaoghih Toujr - Length: 36.6 m - Suitable for: electric wire rope hoist - Other crane ropes: available - Weight: 9.9 kg

Būklė: geras (naudotas), Winch rope, crane rope, hoisting rope, wire rope - Wire rope: Ø 12 mm - Length: approx. 31 m Kodeb A S Iajpfx Aaujlr - Suitable for electric wire rope hoist - Other crane ropes also available - Weight: 23 kg

Būklė: naudotas, Thread tap for pipe threads, preliminary and finish cutter, R 2 3/4 inch Klsdpfx Aaodk Rdvsujr

Būklė: naudotas, Winch rope, crane rope, hoisting rope, wire rope Klsdpfxeghidle Aaujr - Wire rope: Ø 7 mm - Length: 19.7 m - Suitable for: electric wire rope hoist - Other crane ropes: available - Weight: 4.15 kg