Mobilus dulkių siurblys

Spänex SMU 45

Exhibition machine

Type A according to DIN EN 16770:2018

Without fire extinguisher, tested in accordance with test principles GS-HO-07 of the BGHM.
The dust extractor is a mobile extraction and filtration unit for industrial use, designed for positioning in work areas.
The dust extractor is suitable for collecting, conveying, and separating dry wood, paper, or plastic chips and dust from various processing machines.
Comprising a vacuum-tight housing with suction nozzle and non-return flap, antistatic filter elements with jet-pulse cleaning, clean air side high-performance radial fan with IE3 efficiency class three-phase motor, as well as integrated exhaust sound absorber and air outlet grille.
Equipped with 2 swivel and 2 fixed castors, 2 chip containers with collection bags, and a control unit with 5 m connection cable and CEE industrial plug.
The control unit is designed for automatic operation. Automatic start-up control for up to 6 machines and automatic filter cleaning with runtime addition are included. For automatic start-up, either current transformers or potential-free contacts of the machines can be used.
1K PVC single-layer coating in RAL 9006 (white aluminium).

Delivery takes place in fully assembled, ready-to-operate condition.
Compressed air prepared on site must be provided for filter cleaning (connection via plug nipple NW 7 / 6 bar).

Technical Data:
Suction nozzle: Ø 250 mm
Residual dust content: < 0.1 mg/m³ H3
Filter area: 21 m²
Cleaning: offline – compressed air jet-pulse
Compressed air supply: 6 bar (connection plug nipple NW 7)
Airflow rate: 4,500 m³/h
Rated airflow (at 20 m/s in suction nozzle): 3,530 m³/h
Vacuum (at suction nozzle, rated airflow): 2,700 Pa
Sound pressure level MAX (distance from machine 1 m): 67 dB(A)
Fan motor: 5.5 kW, 230/400 V, 50 Hz, 3,000 rpm, IP 54
Operating mode: continuous, intermittent
Collection drum capacity: 2 x 165 l
Dimensions (L x W x H): 2,130 (2,540) x 900 x 1,962 mm
Weight: approx. 705 kg

Accessories:

1 frequency inverter 5.5 kW for SMU dust extractor fan, manufacturer Eaton (item no. 114004)

With control integrated into the dust extractor cabinet, for maintaining constant airflow when the filter is saturated, including safe fan stop during filter cleaning.
Individual adjustment of suction pressure/airflow according to current needs.
The inverter increases system efficiency, saves energy, and reduces wear on materials and machinery.

Technical features:
- Motor output: 5.5 kW
- Integrated PID controller
Dsdpfx Adjvwfu Nsmocn
- Automatic energy optimization
- Integrated manual/automatic switch-over
- Commissioning menu for rapid parameter setup
- Integrated RFI filter in compliance with EN 55011-1B
- Synchronization with a free-running motor shaft
- Including pressure transmitter 0-50 mbar (pressure sensor)

1 slide valve controller for 1 – 8 processing machines (item no. 113197)

Control of up to 8 electropneumatic shut-off slide valves in the extraction pipelines on the respective processing machines, triggered by potential-free contacts or current transformers on the machines.

8 current transformers STWA1 (item no. 600668)

For current detection at the processing machines, suitable for all STW types.

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.