CNC įrankių šlifavimo staklės

SMP Numaffut CA6

Gamybos metai: 2007, būklė: visiškai atnaujintas (naudotas), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel paths: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Fgedpjmmfwuofx Ac Dsa Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Achievable surface finish: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading in case of wire breakage Manual front door (accessible from one side) Including AGIEJOGGER handheld control for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3,460 kg The machine will be cleaned and completely overhauled after receiving your order. You will receive a 6-month warranty on all machine parts. Commissioning and training are also available upon request.

Būklė: geras (naudotas), Distance between centres: 1000 mm Centre height: 175 mm Grinding length: 500 mm Max. grinding diameter: 300 mm Grinding wheel dimensions (OD x ID x width): Ø500 x Ø203 x 80/100 mm Internal taper: Morse 5 Grinding wheel motor power: 7.5 kW Fgodpfxstt Rawe Ac Dja Total power: 17 kW Longitudinal carriage travel (X-axis): 267 mm Cross carriage travel (Z-axis): 650 mm CNC brand: FANUC CNC model: 16-T Swivel range: +/- 8.5° Dimensions: 2600 mm x 2300 mm x 2100 mm Approx. weight: 4200 kg

Gamybos metai: 1991, būklė: paruoštas naudoti (naudotas), Axes: 5, max. grinding wheel diameter: 150 mm, spindle speed: 9,000 rpm, workpiece spindle speed: 1,500 rpm, clamping spindle speed: 13,000 rpm, travel X/Y/Z: 200 mm/190 mm/150 mm, tool holder: HSK-50. Machine dimensions X/Y/Z: approx. 1,700 mm/1,400 mm/1,800 mm, control: NumRoto 1060. Control unit defective. Includes coolant pump and coolant tank, grinding wheel set with 12x holders. Documentation available. On-site inspection possible. Fgjdpfjvu Dfbsx Ac Doa

Būklė: naudotas, Gamybos metai: 1983, Internal diameter min / max: 10 / 250 mm Grinding depth: 400 mm External diameter max.: 380 mm Swing diameter: 390 mm Table travel max.: 550 mm Table stroke min.: 2 mm Rapid traverse: 10 m/min Table speed - stepless: 0 - 10 m/min Coarse adjustment: 18 mm Fine adjustment: 4 mm Max. workpiece weight: 100 kg Spindle head B 6 DIN 55021 Spindle speeds - stepless: 15 - 1,500 rpm Swivel angle max.: +/- 30 degrees Spindle bore: 50 mm Drive power: 2 kW Rapid traverse: 0 - 250 mm/min Stroke: 70 mm Drive power: 3 kW Machine weight approx.: 2.7 t Space requirement approx.: 3.0 x 3.0 x 3.2 m Internal grinding machine BAHMÜLLER - JES 12 - new control (July 2015) Fsdpfx Asvprxfjc Djga

Gamybos metai: 2008, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, The system was used for grinding oil cleaning in carbide processing. Eckert cooling unit 3 filter towers with sludge bags Filtration capacity: 80-100 l/min Fgedpjlczcwsfx Ac Dja Filtration fineness: 3-5 µm The description specifies the system with sludge barrel; technical data are similar. Original paper manual available. Videos available on request.

Gamybos metai: 2000, būklė: paruoštas naudoti (naudotas), Travel range X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Fsdpfx Acjv Uqb Nj Djga

Būklė: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Fjdpfx Aeuxft Esc Dsga Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2010, Haas Multigrind CB CNC-Schleifmaschine mit mehreren Achsen, 12-fach Werkzeugwechsler, Siemens Sinumerik 840D Steuerung, Be- und Entladen automatisch, LTA Industrie-Luftreinigungsanlage, Baujahr 2010 Technische Daten - Schleifspindeln (mit zwei Spindelenden) Aufnahme-Kegel ø 31,75 mm Leistung 100% / 40% ED: 11,5 / 14,5 kW Drehzahl Standard: 8.000 min⁻¹ Option: Ein Spindelende Aufnahme: HSK 50E Leistung 100% / 40% ED: 11,5 / 14,5 kW Fedpfjv Igg Iox Ac Dsga Drehzahl Standard: 8.000 min⁻¹ Option: Ein Spindelende Aufnahme: HSK 50E Leistung 100% / 40% ED: 11 / 12 kW Drehzahl Standard: 18.000 min⁻¹ Option: Ein Spindelende Aufnahme: HSK 80E Leistung 100% / 40% ED: 30 / 30 kW Drehzahl Standard: 8.000 min⁻¹ Option: Hochfrequenzspindel – auf Anfrage Maschinentisch Spannfläche: 1.000 x 500 mm Anzahl, Abstand und Breite der T-Nuten: 9 / 50 / 12H7 mm Bearbeitungsbereich X-Achse: 700 mm (optional) 1.000 mm (optional) 1.200 mm Y-Achse: 410 mm Z-Achse: 500 mm C-Achse Schwenkbereich: 320° Option: X3 – Zusatzachse Verfahrweg: 400 mm Messsystem & Vorschub Auflösung Linearachsen: 0,0005 mm Eilgang Linearachsen: 30.000 mm/min Auflösung Rundachsen: 0,001° Drehzahl C-Achse: 400 min⁻¹ Rundachse (A-Achse) Standard Spitzenhöhe: 175 mm Drehzahl als Spindel: 2.600 min⁻¹ Standardaufnahme: ISO SK 50 / Zentrierung 70H5 Optional: HSK 100 / 80 / 63 / 50 Werkzeugwechsler-Option HSK50E Anzahl Werkzeugplätze / Werkzeugdurchmesser Innenrad: 5 / 300 mm bis 9 / 100 mm Außenrad: 7 / 300 mm bis 16 / 100 mm HSK80E Anzahl Werkzeugplätze / Werkzeugdurchmesser Innenrad: 5 / 300 mm bis 8 / 100 mm Außenrad: 7 / 300 mm bis 14 / 100 mm Werkstückgröße Durchmesser: 340 mm Länge: 550 mm Länge zwischen Spitzen: 500 mm Anschlusswerte Betriebsspannung: 400 V / 50 Hz, abgesichert mit 80 A Steuerung: Siemens Bahnsteuerung – Sinumerik 840 DSL Pneumatik: Betriebsdruck: 6 – 10 bar Gewicht Gesamtgewicht je nach Ausstattung: 10.000 kg oder mehr Stellfläche Länge x Breite (Standard): 3.227 x 2.700 mm Höhe im Betrieb: 3.550 mm Höhe mit Kühlmitteloption: 3.810 mm (min. Hallenhöhe 4.100 mm)

Būklė: naudotas, Technical details: Swing diameter: 200 mm Centre distance: 450 mm Cross travel: 245 mm Longitudinal travel: 830 mm Table feed rate: 0.05-4.5 m/min, stepless Speed: grinding spindle 1,780 / 2,050 rpm Speed: workpiece spindle 50–500 rpm Grinding wheel dimensions: 350x32x127 mm Table size: 2,200x280 mm Table swivels both sides: 9° forward, 10° backward Total power requirement: 6.0 kW Machine weight approx.: 2.2 t Machine dimensions: 2.2x2.05x1.6 m Fodpfxju Ng Dgs Ac Djga UNIVERSAL CENTRE GRINDING MACHINE without internal grinding device - For precision grinding of external (and internal) as well as tapered surfaces. - Grinding spindle head infeed manually or hydraulically - Hydraulic, stepless table feed - Grinding spindle swivels 60° - Workpiece spindle head swivels 90°, with Morse taper MK 4 - Tailstock with Morse taper MK 3 Equipment: - Wheel dressing device - Coolant tank incl. pump and feed line in current condition.

Būklė: geras (naudotas), cilindrinės šlifavimo staklės Fgedpfxjtrgnde Ac Dja