Ekscentrinis presas

Smeral Trnava LEN-40 C

Sąlyga: geras (naudotas), Manufacturer: OMERA Type: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Throat depth, horizontal (HOR): 670 mm Throat depth, vertical (VER): 940 mm Stroke cylinder: 350 mm Column diameter: 200 mm Bodjkvnumepfx Ah Sswh Specifications Metric / US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Sąlyga: geras (naudotas), Used radial drilling machine SASS Mod. TRM 2200 Excellent condition, fully operational. Equipped with cube Maximum drilling diameter in solid cast iron: 100 mm (20-22) Maximum drilling diameter in solid steel R=60: 80 mm Spindle diameter (sliding quill): 102 mm Spindle Morse taper: 6 Vertical spindle travel: 500 mm Number of spindle speeds: 32 Spindle speed range with 50 Hz motor – rpm: 18 ÷ 1600 Automatic feeds Maximum arm outreach (column edge to spindle axis): 2230 mm Minimum and maximum drilling radius: 660 ÷ 2505 mm Bedjikqz Sopfx Ah Sjwh Head travel on arm: 1845 mm Vertical arm travel: 1040 mm Column diameter: 550 mm Column height with motor: 3720 mm Base plate height: 260 mm Base dimensions: 2490 x 1230 mm Spindle motor: 11 HP Weight: 9000 kg

Sąlyga: naudotas, Gamybos metai: 1961, Plaktuko svoris: 750 kg Plaktuko kėlimas: 660 mm Smūgių dažnis: 100/min Smūgio energija: 2040 kJ Atstumas nuo apatinio balno iki apatinės plaktuko kreiptuvo briaunos: 6600 mm Išsikišimas: 750 mm Plieno kalimas – stačiakampis iki 240 mm Plieno kalimas – skersmuo iki 270 mm Variklio galia: 75,0 kW Plaktuko svoris: 16,5 t Pagrindo svoris: 15,5 t Bwjdjvuulljpfx Ah Soh Bendras svoris: 32,0 t Matmenys (IxPxA): 3,2 x 1,45 x 3,45 m SPECIALUS PASIŪLYMAS Kaldinimo plaktukas, veikimo principas: pneumatinis Kaip yra, be paleidimo / be papildomų darbų, laisvai pakrautas ant sunkvežimio Prieš išmontavimą pas pardavėją yra vaizdo įrašas

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1995, Mostana 1M63 x 3000mm Durchgangs-Drehmaschine mit Plansupport Maximale Spitzenweite: 3000 mm Maximaler Umlaufdurchmesser über Bett: 700 mm Maximaler Umlaufdurchmesser über Planschlitten: 350 mm Maximaler Umlaufdurchmesser im Bett-Auschnitt: 900 mm Spindelbohrung: 105 mm Spindeldrehzahlen: 10–1250 U/min Spindelmotor: 15 kW Planschlittenweg: 400 mm Baujahr: 1995 Die Maschine ist ausgestattet mit: - Sony LH70 2-Achsen-Digitalanzeige - Sicherheits-Drehfutterabdeckung mit Verriegelung - Plansupportverstellung zum Kegeldrehen Bwodpfxjwf Sfvs Ah Ssh - 4-Backenfutter (500 mm) - Feste Lünette, 3-Punkt, 390 mm - Schnellvorschub - 4-fach-Stahlhalter - Wechselräder - Kühlmitteleinrichtung Zum Verkauf durch *Jet Machinery Ltd* Lager-Nr. Jet Machinery: #78739 Maschinen-Seriennummer: 1688 Preis: £14.950,00 zzgl. MwSt. Alle Angaben sind nach bestem Wissen gemacht, jedoch ohne Gewähr. Wir empfehlen Interessenten, alle wichtigen Details vor dem Kauf zu prüfen. Hinweis zum Arbeitsschutzgesetz 1974: Es ist für uns als Lieferant nicht ohne Weiteres möglich, zu gewährleisten, dass die Ware für Ihre Anwendung die Anforderungen hinsichtlich Sicherheitsvorrichtungen usw. vollständig erfüllt. Käufer sollten einen Fachbetrieb für Arbeitssicherheit hinzuziehen und die Maschine vor Inbetriebnahme prüfen lassen.

Sąlyga: geras (naudotas), Gamybos metai: 1963, Vertical Turning Lathe Manufacturer: JUNGENTHAL, Type: DK 1400, Year: 1963, equipped with 1-axis digital readout. Maximum turning diameter: 1400 mm Faceplate: 1250 mm automatic turret head Bedsvi Hryjpfx Ah Sewh Spindle speeds: 3.5-180 rpm Feeds: 0.063 - 3.15 mm/rev Rapid traverse: 1800 mm/min For additional specifications, please refer to the data sheet. Machine documentation available. Dimensions: Length 4 m, Width 2.4 m, Height 3 m, Weight 16 t In good overall condition.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2010, Large, semi-automated Pace cutting system Polar 137 XT-Autotrim with stack lift, jogging unit with counting scale, gripper transport system, turning gripper, and unloader, built in 2010, with approximately 5.43 million cuts. Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogging unit by the operator, jogged, and then automatically transferred by the Autotrans gripper system from behind the jogger onto the rear table of the high-speed cutter and rotated as required. After cutting, the Transomat automatically places the layers onto a pallet, while cutting can continue simultaneously. Polar Stack Lift LW 1200-4 Platform dimensions: 80x126 mm Load capacity: 1,200 kg Equipped with steplessly adjustable reflex light barriers for automatic lifting or lowering. Jogging Unit RAH-4 with air removal roller and discharge for rear table feeding Usable format up to 75 x 105 cm. The jogged material is automatically discharged to the rear into the STR stack rack. The Autotrans gripper transport system then handles the layer transport to the rear table of the high-speed cutter. Sheet scale – Polar Counting Scale Avery Weigh-Tronix for creating precisely measured cutting layers. Gripper transport system POLAR Autoturn – Clamp transport for rear table loading and turning gripper takes the prepared cutting layer from the stack rack or buffer table. Via air tables, whose air cushion optimizes material flow, the material is directly conveyed to the rear table of the high-speed cutter and deposited precisely there. The gripping system holds the cutting layer firmly during transport, ensuring layers stay perfectly aligned even when pre-aligned. Cutting machine Polar 137 XT-AT with touch operation Bedpexd U Sasfx Ah Sowh and Autotrim function for automatic waste removal under the front table during cutting. - Lowerable left side gauge (required for rear table loading), also enabling formats with a diagonal of...

Sąlyga: naudotas, Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: C3300, šlifavimo ilgis: 4 500 mm, šlifavimo plotis: 300 mm, stalo ilgis: 4 500 mm, stalo plotis: 300 mm, reikalingas aukštis: 2 500 mm, vietos reikalavimas ilgis: 13 700 mm, reikalingas plotis: 2 500 mm, Reform AR45 T9 ZU C3300/86 Year of manufacture: 1986 Grinding length: 4,500 mm Grinding width: 300 mm Workpiece height: 250 mm Table or grinding arm swiveling range: ±90 degrees Segment head diameter: 560 mm Bsdetqtn Depfx Ah Sswh Spindle diameter in front bearing: 120 mm Swivable: 2° Max. torque: 719.5 Nm Motor: B280, 55 kW Grinding spindle speed range: 0–730 rpm Control: BBC Baumüller drives Marposs measuring system Hydraulic clamping Grinding mist extraction: Hydrocyclone cleaning system Additional grinding unit ZU Feed rate: 2,000–35,000 mm/min Space requirement approx. 13.7 x 2.5 x 2.5 m

Sąlyga: naudotas, Technical Details: Spindle diameter: 130 mm Drilling depth: 1,380 mm X-travel: 2,500 mm Y-travel: 1,600 mm Z-travel: 380 mm W-axis: 900 mm spindle feed U-axis: 320 mm facing slide feed Control system: on request Tool holder: ISO SK50 Speed – facing slide: 4.5–180 rpm Drive spindle speed: 4.5–900 rpm Feed – x/y: 5–2,000 Total power requirement: approx. 40 kW Machine weight approx.: < 35 t plus auxiliary equipment The machine can be offered in four different sales options. Please choose! 1. The machine is in as-new mechanical condition, as it stands. Bsdpfovr S Uljx Ah Sewh 2. The machine as it stands, including plate table 4,000 x 2,000 x 300 mm = Stock No. 1101081 3. The machine rewired, with new control cabinet, digital readout, 4-axis, Siemens AC drives, Siemens axis motors (50A/31Nm) with 12 month warranty on all new parts. 4. Additional accessories can also be optionally offered, e.g. coolant system, chip conveyor, enclosure, etc. Please contact us to discuss these options.

Sąlyga: naujas, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Stroke rate: 160 strokes/min Ram area: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Pass-through opening in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Bwjdpfjb U Hwpsx Ah Sjh Machine weight approx.: 1.9 t Space requirement approx.: 1.3 x 1.0 x 1.85 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam switch gear Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Sąlyga: naujas, Pressure: 40 t Outreach: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram area: 185 x 180 mm Ram bore: 40 H7 mm Table through-hole: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx. 2.7 t Space requirement approx. 1.4 x 1.1 x 2.1 m - Hydraulic clutch-brake combination - Central lubrication (Vogel) - Cam control system (Balluff) - Control cabinet with touchscreen - Height-adjustable table Bedpfxeb U Hwto Ah Sjwh - Foot switch