Traversas iš SLP

SLP RTS110

Sąlyga: naujas, plieno lakšto storis (maks.): 4 mm, - Capacity: 4 mm - Hydraulic roll adjustment - Foot switch - Brake motor - Equipped with 4 sets of rolls - Emergency stop Fedpfjgg Nq Hsx Ab Sjpb - 400V

Sąlyga: naujas, Gamybos metai: 2024, The machine has an electrical connection of 15 kW and can handle log diameters up to 85 cm. The saw motor is electrically powered and has an 11 kW motor. Fodpfx Absu Sklmo Sopb

Sąlyga: naujas, 890*1100 mm 250 kg/m2 16,15 € 500 kg/m2 18,02 € 750 kg/m2 22,50 € Jei jums reikia lentynų ar priedų kitokiose komplektacijose ar versijose, prašome susisiekti su mumis. Fsdegqw A Hepfx Ab Sspb Siūlome platų naujų ir naudotų lentynų bei priedų asortimentą ir mielai padėsime planuojant. Papildoma įranga, pavyzdžiui: Rėmų, kampų ir atsitrenkimo apsaugos, perstumimo apsaugos, drožlių plokštės, tinklinės grotelės, galinės sienelės grotelės, gylio sijų – tiekiame. Siuntimas: Prašome teirautis dėl siuntimo išlaidų, nurodydami savo pašto kodą ir vietovę bei pageidaujamą prekių kiekį. Papildomos paslaugos: Planavimas, lentynų surinkimas/išmontavimas, pirkimas/pardavimas. Techninių duomenų, aprašymų ir kainų pakeitimai ar klaidos, taip pat tarpinis pardavimas – galimi!

Sąlyga: labai geros būklės (naudotas), Focker Strähler Welding Positioner, 8 Tons - Load Capacity: 8,000 kg Fedef Ezdnopfx Ab Sopb - Equipped with hand and foot remote control - Infinitely variable speed and tilt adjustment - Rotation speed: 0.02 rpm to 1.1 rpm - Table diameter: 1,500 mm - Height to center (tilted): 1,170 mm - Height (horizontal): 1,400 mm - Length: 2,400 mm - Width: 1,500 mm - Condition: Visually and technically impeccable, operates very quietly

Sąlyga: naujas, The splitter separator has a diameter of 900 mm and can be supplied with sound insulation upon request. Drive: electric motor, 0.75 kW. Fsdpfx Abjvuku No Sspb

Sąlyga: geras (naudotas), Gamybos metai: 2022, Stow Rėmai: 9000x1100x100 – 600 vnt. – 95 EUR 9500x1100x100 – 200 vnt. – 100 EUR 10000x1100x100 – 90 vnt. – 105 EUR Sijos: Fsdpfx Ajqzhnceb Sspb 2700x130 mm (3000 kg keliamoji galia) – 8744 vnt. – 11 EUR 3600x160 mm (4000 kg keliamoji galia) – 378 vnt. – 14 EUR Kojų apsaugos – 890 vnt. – 6 EUR/vnt.

Gamybos metai: 2022, Sąlyga: naujas, Cable Stripping Machine G.R.S. 5 This is the second machine from G.R.S. that is free-standing and does not require an underframe. Compared to the G.R.S. 4, it is more than twice as heavy, approximately 30% more powerful, and requires 380V for operation. Technical Specifications: GRS 5: 10mm - 90mm Dimensions (W/H/D): 78 cm / 120 cm / 84 cm Weight: approx. 220 kg Stripping speed: 30m per minute Motor: 380V / 3000W Fpodohpcprjpfx Ab Ssb Suitable for stripping cables with a cross-section of 10–90 mm and insulation thickness up to 20 mm.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: YV2RT60FXKA84xxxx, rida: 5 874 km, Gamybos metai: 2021, Please contact ATS Norway for further information. Please quote reference number on enquiry: 20511 Specifications: - Model Year: 2021 Fjdpfxowphixs Ab Sspb - 5,874 km (mileage increasing slightly) - EU approval valid until: 21.02.26 - Euro 6 engine - 8x2 configuration - 551 HP - Suspension on first and second axle: steel - Suspension on third and fourth axle: air - 2 x 110-litre variable displacement pumps - 2 x manual extensions for main boom, 2 x for auxiliary boom - Optical remote control by Scanreco (top model) - Load cell on main boom - Additional function for main boom and auxiliary boom - Automatic leveling (Vehicle self-levels horizontally and is immediately ready for lifting.) - Virtual workspace (Ability to limit all axles with just a few button presses, no workshop required. Ideal for work under high voltage, etc.) - SKF centralized lubrication up to the first section - Auxiliary function up to very top of the boom - Single winch hook (jib / main boom) - 2 sheave winch hooks (boom / main boom) - 4-point winch hook (main boom) - Hook for jib - Hook for main boom (large hook) - Option to lower generator (24 volts) - Cable end sensor and sleeve - 4-tonne winch - Diagnostic cable for online support (remote assistance) - Danfoss valve center - 2 x 2-tonne counterweight (M is only required for cranes above the cab – otherwise, counterweights are not needed and can be removed if desired) - Front stabilizer leg Superstructure: - 4 x work lights, strategically placed in each crane locker - 50" LED work light at rear of cab - Powerful LED lighting in crane - VBG coupling with air servo control unit mounted left side, rear locker - Roof rack - 2 LED high beam bars at the front of the roof (daylight!!) - Amber LED work warning bar on the roof - EasyUp folding ladder with side railing - Chain signage boxes etc. mounted on the rear stabilizer legs, extend/retract with the legs, can also be stored during transit - Control charger in the cab - Plastic inner fenders on axles 3 and 4 - Triangular pull-out locker between axles 3 and 4 - Large locker with 500 W fan heater for hanging/drying clothes, etc., left side between axles 2 and 3 - Flat/lower closed rear with alloy door panels, custom-cut for a perfect vehicle fit, rounded edges for a professional appearance - CNC manufactured panels at rear of cab - Sides, cab, and rear fully painted - Crane rest for operation without boom - 5 outrigger pads (4 x 80x80x6 cm in designated cradles at rear of platform) - Large locker right side, 1.2 x 1 metres - Powerful LED reversing/work lights - Vehicle rear modified with CNC-manufactured panels, several integrated, stylish LED rear lights - Strategically placed access hatches to relevant components underneath the superstructure - Precisely cut...

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, bendras svoris: 800 kg, darbinio aukščio: 870 mm, galia: 11 kW (14,96 AG), ruošinio plotis (maks.): 70 mm, Technical data: - Max. edge thickness: 5 mm / 8 mm - Max. workpiece height: approx. 40 mm / 50 mm - Min. workpiece length: approx. 250 mm / 300 mm - Min. workpiece width: approx. 70 mm - Feed speed: approx. 11 m/min - Ready for operation: approx. 4.5 min - Power consumption: approx. 11 kW - Electrical connection: 230/400V / 50/60 Hz - Working table height: 870 mm - Dimensions (LxWxH): 4100 x 1400 x 1300 mm Fsdpfeug Uqaox Ab Sopb Condition and further details as shown in the pictures.

Sąlyga: naujas, Gamybos metai: 2026, Dviejų eilių ir furnitūros gręžimo staklės pagal SISTEMĄ 32. Eilinio gręžimo staklės su 2 gręžimo sijomis, kiekvienoje po 25 preciziškas gręžimo ašis. Trumpas pristatymas: • Eilinis skylučių gręžimas pagal 32 mm sistemą • 50 (2 x 25) gręžiamų skylių vienu gręžimo ciklu Fsdpfx Abedxz Nts Sspb • Gręžimo gilumo kompensacija skirtingam skylės gyliui • Tvirta precizinė gręžimo pavarų dėžė iš GANNOMAT • Eilės baldinių jungčių ir puodelinių lankstų gręžimas (pasirinktinai) • Pasirinktinai trečias gręžimo agregatas