V formos diržo skriemulys 4 grioveliais

SKF SPA160-04 2517 (13 mm)

Sąlyga: naudotas, Gamybos metai: 2016, veikimo valandos: 1 049 h,

Sąlyga: geras (naudotas), Gamybos metai: 1991, maximum planing width 520 mm maximum planing height 200 mm 4-knife cutterblock slotted table lips electric height adjustment Kjdpfxsiwi Ezs Af Iswt with mobility kit with knife setting gauge

Sąlyga: geras (naudotas), Drying oven for UV line Kwodpfx Afst Ag Uqe Iet

Sąlyga: labai geros būklės (naudotas), Power: 220-240VAC // Current: 1.8 A // Frequency: 50/60 Hz // Phases: 1 // Power: 0.4 kW WITH OUTPUT CONVEYOR BELT Return belts: For envelope size 10.5 cm x 14.8 cm and for portrait orientation, the return belts should be pushed towards the central transport belt. Rule: for large envelopes, push the return belts outward; for small envelopes, push the return belts (22) inward. CONNECTION TO THE PRINTING MACHINE The STENZ FEEDER requires no synchronization. Position the feeder into the printing press using the handles and set the required height with the hand crank. Important: Only after setting the print height, secure the rear rollers and check the machine's stability. Switch on the machine and begin printing. For single-sheet feeder printing machines (GTO): adjustable inclination. Trouble-free envelope printing can begin. Developed for heavy-duty use at maximum printing speed. Compatible with all 36 x 52 printing presses, regardless of the feeding system (stream feeder / single-sheet feeder). – No mechanical modifications to the press required. – No synchronization settings needed thanks to laser technology. – Extremely short set-up times enable economic use from as little as 1,000 envelopes – Easy operation – The feeder’s design enforces overlapping feeding. This ensures the Stenz Feeder’s throughput is not restricted – Minimum wear parts for extremely long service life – Already approved in thousands of presses worldwide – A Swiss quality product – Designed by printers for printers. Kwedpsh Eibajfx Af Ist Specifications: Speed: Limited by the printing press Length: 115 cm Width: 50 cm Height: adjustable Max. format size: 36.5 x 35 cm Max. feed width: 36.5 cm Electrical: 230 V, 50 Hz

Sąlyga: labai geros būklės (naudotas), Robland 3200 Silver Line panel saw with sliding table Scoring unit with separate motor, Sliding table length: 320 cm Main motor power: 7 kW 3 spindle speeds Max. blade diameter: 450 mm Kedpev S Hy Ajfx Af Ijwt Blade tilt (0–45°) electrically adjustable with digital readout Blade height adjustment electrically controlled, no digital readout Rip fence on right, motorised adjustment up to 1240 mm Digital readouts on sliding table fence Mitre gauge included Branded machine in very good condition,

Sąlyga: naudotas, Painting line consisting of: Pos.1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel ~ 2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller transport - 2 upper air blast ducts - 1 lower air blast duct - Dust removal brush - With ionizing bar above - With ionizing bar below - With own drive - With independent control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction port diameter: 180 mm + 120 mm - Total connected load: 7.6 kW - Voltage, Frequency: 400 V / 50 Hz Pos.3 Venjakob VEN SPRAY Perfect Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Operator side: left - IR pre-heating, number of emitters: 2 pcs. - Dual spray gun drive Kwsdpfx Afev I Akvs Iot - Dry extraction - Extraction port diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Continuously variable feed rate ~ 4–10 m/min - Belt cleaning system - Paint recovery via V-belt system - Gun control EPS-CNC 7000 - Color management system for 3+1 pump units - Number of installed Airless spray guns: 4 pcs. - Quick-change system for spray units - Remote maintenance system - Dust protection hood at the machine outlet - Exhaust air recirculation system - Extraction fan air control - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: ~20–26 kW - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small batch container - Spray gun boom system for quick removal of 4 AirMix spray guns from the spray cabin, incl. quick couplings for pneumatic and material hoses. Pos.4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.5 Cefla Vertical Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs. - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Load capacity per pallet: 300 kg - Max. part height: ~110 mm - Clear height between pallets: 120 mm - Distance: center of pallet to center of pallet: 3,658 mm - Max. part length: ~5,200 mm - Number of controllable temperature zones: 2 pcs. - Fresh air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Max. heating capacity: 175 kW - Max. drying temperature: ~55–60 °C - With heat exchanger, hot water - Without hot water control valves - U-shaped pass-through configuration - Infeed side right - Feed speed via frequency inverter ~2–20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: ~23 kW - Voltage, Frequency: 400 V / 50 Hz - Voltage fluctuations max. ±5% - Without control valves and water pumps Pos.6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035

Sąlyga: naujas, rida: 1 km, galia: 11,77 kW (16,00 AG), kuro tipas: dyzelinas, spalva: geltonas, bendras svoris: 1 000 kg, tuščias svoris: 1 000 kg, darbinė masė: 1 000 kg, kėlimo aukštis: 2 610 mm, padangos dydis: rups, padang padangų: 100 procentas, pavaros būklė: 100 procentas, grandinės būklė: 100 procentas, sėdimų vietų skaičius: 1, kasimo kibiro plotis: 430 mm, Gamybos metai: 2024, Įranga: guminės vikšrinės juostos, hidraulika, kranas, papildomi žibintai, reguliuojamas strėlė, GG1100 The GG1100 mini excavator with a 3-cylinder Kubota engine is a 1-ton weight class machine featuring a swing frame/knuckle boom and an adjustable undercarriage. Description The latest model GG1100 from Günter Grossmann. Every Günter Grossmann machine is made from quality components. The GG1100 is a well-equipped machine for the most demanding contractors in the construction, electrical, and hydraulic sectors. These excavators are manufactured based on advanced technologies. We guarantee after-sales service and have spare parts in stock in Europe. Price list 10,500.00 EUR Includes: GG 1100 + 380 mm bucket SPECIFICATIONS Model: GG 1100 Brand: Günter Großmann Ksdpfx Afsp Aruxj Ijwt Operating weight: 1,000 kg Boom: Knuckle arm / Swing arm Track: Hydraulically adjustable Bucket capacity: 0.025 m³ Bucket width: 380 mm Engine: Japanese Kubota Cylinders: 3 cylinders Power: 16 HP Main pump: Wanye Hydraulics Swing motor: Dali Travel motor: Dali Travel speed: 1.5 km/h MAIN DIMENSIONS Overall dimensions (LxWxH): 2,770 x 936 x 1,490 mm Total track length: 1,230 mm Chassis width: 896 mm Track width: 200 mm Ground clearance: 132 mm Track height: 320 mm WORKING RANGE Max. digging depth: 1,650 mm Max. digging height: 2,610 mm Max. digging reach at ground level: 2,890 mm Swing radius: 360° Max. blade lifting height: 345 mm Max. blade digging depth: 255 mm

Sąlyga: geras (naudotas), Gamybos metai: 2020, veikimo valandos: 590 h, Funkcionalumas: nepatikrintas, Įranga: Pagrindinis Methor vikšrinės važiuoklės paketas Vikšrinė važiuoklė su 2 važiavimo greičių režimais Važiuoklės vikšras 400 mm, trijų briaunų Papildoma hidraulinė jungtis 70 l/min 24 V elektros valdymas Didelis pilnas nuotolinio valdymo pultas Patogus priežiūrai variklio skyrius su LED apšvietimu Atlenkiamas bunkeris su kelio jutikliu ir automatiniu valdymu Hidrauliškai reversinis ventiliatorius Akustinė paleidimo įspėjimo signalizacija Kuro bakas 300 litrų Dažymas: RAL 2011 gilus oranžinis Papildoma įranga: Guminiai greito keitimo padėklai Variklis Cat C7.1, 205 kW Galinė juosta 6,9 m Rėmas viršdiržiniam magnetui Viršdiržinis magnetas Kwedpfx Afsvnq Rke Ist Greito keitimo volų sistema ant volo Greito keitimo volų sistema ant įrenginio Laistymo sistema LED darbo apšvietimas Papildomas elektrinis siurblys valdymui iki variklio sustojimo Gesintuvas GN 9 A-3 DIN EN 3

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Carriage length: 3200 mm Cutting width at rip fence: 1350 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 200 mm Scoring unit: yes Saw blade height adjustment: motorized Saw blade tilting adjustment: motorized Rip fence adjustment: manual Saw blade angle display: digital Cutting height display: digital Rip fence display: scale Crosscut fence display: scale Kwjdpokuzd Hofx Af Iet Saw blade diameter: 550 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7.5 kW Motor brake: yes / automatic Extraction port: 100 mm and 120 mm Machine length: 3600 mm Machine width: 2000 mm Weight: 1000 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, galia: 200 kW (271,92 AG), Atraskite galingą naudotą Komptech senos medienos perdirbimo įrenginį: 2016 metų CRAMBO 5200 E direct užtikrina efektyvų smulkinimą ir lankstų panaudojimą. Įrenginys komplektuotas su žvaigždiniu sietu Multistar 2-SE, pasukamu transporteriu, viršutiniu magnetu ir valdymo spintomis – tai optimalus sprendimas senos medienos ir biomasės apdirbimui. CRAMBO 5200 E direct garsėja tiesioginiu elektriniu pavaros sprendimu, dideliu našumu ir minimaliomis emisijomis – puikus pasirinkimas įmonėms, vertinančioms ekologiškumą ir ekonomiškumą. Tvirtas dizainas ir paprasta priežiūra užtikrina patikimą eksploataciją. Techniniai duomenys: žr. dokumentuose (pdf byla). Kwodpfx Afexv Acqe Iot