Rezonanso testavimo mašina

SincoTec Power Swingly 20 kN EXCITING MOT

SincoTec
Type: Exciting Mot
Gsdjvx Su Sspfx Acuobu
Resonance Test Bench POWER SWINGLY 20 kN

The POWER SWINGLY BigTable resonance test bench is designed as a two-mass oscillator.
It consists of a vibration head, which is excited via a frequency-controlled asynchronous motor with an unbalance motor, positioned at the top of the machine and generates the dynamic amplitude. The vibration head is supported on the upper crosshead by pre-loaded compression springs and is guided centrally.
The mid-load drive is located at the bottom of the machine and applies the static preload via a geared motor and spindle drive.
The specimen chamber is situated above the clamping table and is limited on top by the adjustable crosshead.
The control of the test bench is handled by the EXCITING MOT regulation system. The complete control electronics for the regulation system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529.

Technical Data:
General Data Test Bench:
Total height of test bench: 1840 to 2240 mm
Height of machine table: 1030 mm
Width of test bench: 800 mm
Depth of test bench: 1500 mm
Height of specimen chamber (max.): 600 mm (excluding force transducer)
Clear column passage: 550 mm
Maximum force amplitude: 10,000 N
Maximum total force: ±20,000 N
Maximum stroke: ±5 mm
Test frequency: 30 to 110 Hz
Transducer accuracy: minimum class 1 (according to DIN EN 10002-3)
Weight of test bench: approx. 1880 kg
Max. weight of clamping fixture: 150 kg

General Data Control Cabinet:
Total height of control cabinet: 1900 mm
Height of table top: 1080 mm
Width of control cabinet: 650 mm
Depth of control cabinet: 700 mm
Weight of control cabinet: 152 kg
Color: RAL 9006 (White Aluminium), Tabletop Midnight

Site Requirements:
Space requirement: 2.5 x 2.5 m
Required ceiling height: 2.8 m
Floor load capacity: 170 N/cm²
Power supply: 400 V / 50 Hz (clockwise phase sequence)
Connection plug: CEE socket, 5-pin, 16 A
Circuit protection: 16 A

Connection and Environmental Conditions
Network specifications:
Voltage: 400 V three-phase with neutral conductor and protective earth, clockwise phase sequence
Voltage fluctuations: < ± 10%
Short-term voltage dips: < 20 ms
Limits for continuous interference: Interference degree A according to VDE0871
Frequency: 50 Hz ± 1%
Protective earth resistance: < 0.3 Ω

Model: POWER SWINGLY MOT
Condition: used
Scope of delivery: (see picture)
(Subject to changes and errors in the technical data, information may be subject to modification!)
Further questions can be answered by phone.

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.