Dvigubas verpstės šlifavimo laikiklis

SIMON SF D 1

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, HD Sink – HD Brush Cleaning Sink The sink is equipped with an adjustable 60 bar high-pressure pump, enabling cleaning within an enclosed working chamber. Cleaning is performed using an aqueous degreaser (10 kg included in delivery) at approximately 45°C. - Viewing window with integrated lighting - Medium filtration via cartridge filter - Convenient operation via foot switch - Including turntable Technical Data: - Working surface: 1,200 x 700 mm - Usable height: 400 mm - Load capacity: 50 kg - Operating pressure: adjustable up to 60 bar - Pump capacity: 14 l/min - Washing temperature: adjustable up to 45°C - Tank volume: 170 l - Heating power: 4,000 W - Total power: 8.0 kW - Voltage: 400 V AC 1 P+N+PE; Frequency: 50 Hz - Machine weight: approx. 180 kg - Overall dimensions with lid open: 1,480 x 991 x 2,080 mm Nedpfx Abshl If Nozjwh

Būklė: naujas, Belt width: 150 mm Belt length: 2,000 mm Belt speed: 30 - 34 m/sec Total power requirement: 4 kW Nwsdpfxjirwwpo Abzoh Machine weight: approx. 100 kg Space required: approx. 1.2 x 0.5 x 0.85 m

Gamybos metai: 2025, būklė: beveik kaip naujas (parodų įrenginys), IMMEDIATELY AVAILABLE!! Manual cleaning is performed using specially designed gloves in the front section. The cleaning effectiveness is ensured by a high-pressure pump and specialized spray nozzle. The cleaning fluid temperature can be set up to 60°C, and the pressure is adjustable from 1 to 80 bar. Technical Data: - Working surface: 950 x 700 mm - Internal height: 450 mm - Load capacity: 70 kg (optionally up to 150 kg) - Spray pressure: adjustable from 1–80 bar - Tank volume: 75 liters / Heating capacity 2 kW Standard Specification: • Blow-off pistol inside the chamber • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel panels above the tank • Upward-opening lid with 2 access ports and gloves • Hardened glass window • Door opening/closing system with gas strut support • Door open monitoring via safety end switch • Filter at the pump’s suction side (500 micron) Nedof A Nqqopfx Abzewh • Foot switch for operating the cleaning pump • Internal lighting • Neoprene gloves, length 600 mm (chemical resistant) • Height-adjustable feet +/- 50 mm • External mini pneumatic oil separator

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, variklių gamintojas: Lindner, kuro tipas: dyzelinas, Įranga: apšvietimas, hidraulika, kabina, oro kondicionavimas, papildomi žibintai, priekabos jungtis, priekinis galios nuėmimo velenas,

Būklė: naudotas, Gamybos metai: 2002, mašinos/transporto priemonės numeris: 2204, Universal Radius Metal Belt Grinding Machine Stock No. 24541 Technical Data: - Grinding belt dimensions: 2000 x 75 mm - Surface grinding opening: 400 x 75 mm - Support vise – tiltable: 90° to 30° - Precision feed adjustment for support via handwheels - Belt speed: 30 m/sec - Working height: 960 mm - Various grinding rollers: Ø 25, 30, 39, 45, 57 mm Njdjviudqspfx Abzewh - Drive: 400 V / 2880 rpm / 3 kW - Required space: approx. W 700 x H approx. 1200 x D 1200 mm - Weight: approx. 125 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Pneumatic clamp ensuring precise pressing of the material onto the saw table during cutting. This significantly increases the accuracy and quality of the cut, facilitating and speeding up panel sizing operations. The clamp is very easy to install and operate. Application of a woodworking pneumatic clamp for a panel saw The lack of proper pressure securing the panel on the saw table can cause a number of issues that significantly impact the efficiency and quality of the cutting process. These issues include: - Uncontrolled chipping: Without solid clamping, the panel isn't held securely on the table, which during cutting can result in uncontrolled chips or splinters. This poses a safety risk to operators and may damage both tools and workpieces, raising production costs. - Excessive material waste: Insufficient pressure can allow the panel to shift during cutting, leading to improper cuts and increased material loss. This may necessitate additional cuts or even complete rejection of the workpiece. - Frayed panel edges: Without stable clamping, vibration and inaccurate cutting may occur, resulting in frayed edges. This not only detracts from the panel’s visual appeal but also from its usability, especially for finishing materials. Benefits of the 3200 mm two-zone pneumatic clamp for panel saws: The solution to these problems is the use of a pneumatic clamp, which ensures the material is firmly pressed against the panel saw table. Key benefits include: - Increased cutting accuracy: The pneumatic clamp ensures stable, even holding of the material, resulting in higher cutting precision and preventing uncontrolled chipping and frayed edges. - Improved cutting quality: With a stable hold, the quality of the cut is significantly improved. Panels are cut cleanly and undamaged, enhancing their value and appearance. - Faster, easier panel processing: Reliable clamping allows operators to work more efficiently and safely, accelerating panel processing and increasing production output. - Easy installation and operation: The pneumatic clamp is straightforward to install and use, requiring no complex procedures and allowing for easy operation. - Two-zone clamping: The pneumatic clamp features two zones (each side equipped with two cylinders), allowing independent control for each side of the saw table. This provides greater flexibility and allows for adaptation to various materials and production requirements. In summary, the pneumatic clamp is a reliable solution for improving panel cutting quality, precision, and efficiency, helping save time and material while reducing the risk of damage and accidents. Technical specifications Clamp length: 3200 mm Material height: 100 mm Nwsdpfxevxtcqj Abzsh Number of cylinders: 4 Operating pressure: 2.0 bar Manufacturer: Cormak

Būklė: labai geros būklės (naudotas), Daugiafunkcinė mašina Robland x310: pjūklas, obliavimo-staklės, frezavimo staklės 5-in-1 Obliavimas: - Plotis: 31 cm - Maks. aukštis: apie 200 mm - 3 peiliai - 1 padavimo greitis Lygiavimo staklės: - Plotis: 31 cm - Stalų ilgis: apie 140 cm - 3 peiliai - Nuolydis reguliuojamas vadovas Frezavimo staklės: - Velenas: 30 mm Nwodpfsy S Txwsx Abzjh - 1 greitis - Šoninis vežimėlis - Reguliuojama tvorelė Pjūklas: - Reguliuojamas aukštyn-žemyn ir nuo 0° iki 45° - Šoninis vežimėlis - Skalė ant šoninio vežimėlio Horizontali gręžimo staklė: - Stalas reguliuojamas aukštyn-žemyn, priekinė-galinė, kairė-dešinė kryptimis Mašinoje įrengti trys 2,2 kW varikliai Maitinimas: 220V Naudota mašina labai geros būklės, paruošta darbui. Tvirta daugiafunkcinė įranga.

Būklė: naujas, Drilling capacity in St 60: 40 mm Thread cutting in St 60: M 24 Thread cutting in GG 20: M 30 Spindle speeds – stepless: 160-2250 rpm Short spindle: MK 3 Spindle stroke: 120 mm Throat: 293 mm Column diameter: 115 mm Machine table – usable surface: 515 x 360 mm Distance spindle / table min./max.: 117/701 mm T-slots – quantity, width, spacing: 2 x 14 x 224 mm Feed: 0.1 + 0.2 mm/rev Machine height: 1840 mm Standard equipment: - Main switch with lockable motor protection switch - Mushroom-head emergency stop button (latching) - Stepless speed adjustment - Digital speed display - Feed overload protection - Protection rating IP 54 - Terminal board in control cabinet (no connection cable supplied) - Spindle guard with electrical interlock Special equipment: Item 12 LED machine lamp with radially adjustable light beam, connected load 230 V, protection rating IP65 Item 20.1 Thread cutting device with foot switch, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depends on spindle speed) Item 25 Coolant system B, consisting of: separate tank (33 l), pump with motor protection switch, complete fitting Item 37.1 Digital drilling depth display Zero-point setting (drilling start), 5-digit LED display, character height 13 mm Nedpfx Aeyvvq Dsbzswh

Būklė: naujas, Belt width: 100 mm Belt length: 2,000 mm Belt speed: 15/30 m/sec Tube diameter: 20 - 76 mm Angle adjustable from - to: 30 - 90 degrees Connection voltage: 400 V Total power requirement: 2.5 / 3.3 kW Machine weight: approx. 0.19 t Njdpfx Abeupw Riozewh Required space: approx. 1.2 x 0.75 x 0.7 m Belt grinding machine with: - Grinding belt, grit K 40 - Including 7 grinding rollers: 20, 28, 32, 41, 48, 60, and 76 mm

Būklė: geras (naudotas), Gamybos metai: 1998, Offer 24339 Technical Data: - Belt dimensions: 2000 x 100 mm Nwodpst Uzxnefx Abzjh - Surface grinding opening: 400 x 100 mm - Support vise – angle adjustable: 90° to 30° - Fine adjustment of the support via hand lever - Belt speed: 30 m/sec - Contact wheel / grinding roller for approx. Ø 42 mm - Drive: 400 V / 2880 rpm / 3 kW - Required space: approx. W 700 x H 1200 x D 1200 mm - Weight: approx. 225 kg - Contact rollers: 33.7, 42, 48 mm