Univ. spindulių metalo juostinis šlifuoklis

ALMI AL 100 U

Sąlyga: naudotas, Gamybos metai: 2023, Condition: Used Year of manufacture: 2023 Stock number: 5543 Delivery time: prompt, subject to prior sale Country of origin: Netherlands Price: €3,100 In stock: 1 Belt dimensions: 100 x 2,000 mm Tube diameter: 20 – 76.1 mm Manual lever adjustment: 1 Motor power: 3 kW Weight: 190 kg Demo machine / as-new condition Net price (new price €3,798.00) Operation of the AL100U-01 model is carried out via a lever. With the AL 100U you can notch material from Ø 20 to Ø 76.1 mm. The support cross and the carriage with a swiveling clamp are continuously adjustable, allowing you to notch any tube profile at any desired angle from 30° to 90°. Redpfx Aoynmwqegisp The ALMI AL100U-01 notches square, rectangular, and round tubes of various wall thicknesses and is suitable for all standard materials. The ALMI belt tensioning system makes adjusting the grinding belt even easier using the supplied hex key. The sanding belt is quickly tensioned, and the sanding rollers can be changed within seconds. All tube notchers are equipped with a deburring table. Includes 5 pcs. sanding belts, 1 pc. sanding roller Ø 42.4 mm.

Sąlyga: naudotas, CNC Oxy-Fuel Cutting System BACH Type ACW 2500 Oxy-Fuel Cutting Machine with CNC Controller NBS 400 Machine No. 14 561-06 Year of Manufacture: 2006 Cutting Area: 2500 x 6500 mm Track Length: 8000 mm Track Gauge: 3345 mm Track Height: 650 mm 2x Machine Cutting Torches with Burn Table Rodpfsf Ncadjx Agiep

Sąlyga: naujas, Condition: New Delivery time: approx. 2 weeks from order placement Country of origin: Netherlands Price: €4,646 Grinding belt dimensions: 100 x 2,000 mm Tube diameter: 20 - 76.1 mm Lever adjustment: 1 Handwheel adjustment: 1 Rjdpfx Aowir Dmjgiep Motor power: 3 kW Weight: 220 kg The AL100U-02 model can be operated either with two handwheels or with a single lever. Both options are available on the machine. With the AL100 U-02, you can grind material from Ø20 up to Ø76. The support cross and the carriage with rotating clamp are infinitely adjustable. This allows all tube profiles to be ground at any desired angle from 30° to 90°. The ALMI AL100U-02 machines out square, rectangular, and round tubes with various wall thicknesses and is suitable for all common materials. Thanks to the ALMI belt adjustment system, adjusting the grinding belt is now even easier with the supplied hex key. The belt can be quickly tensioned, and the grinding rollers can be changed in just a few seconds. All tube notching machines are equipped with a deburring table. Includes 5 grinding belts, 1 grinding roller Ø42.4 mm.

Sąlyga: naudotas, Gamybos metai: 2019, Condition: Used Year of manufacture: 2019 Stock number: 5505 Rsdpfx Agswiqwleiop Delivery time: Immediate, subject to prior sale Country of origin: Netherlands Price: €2,670 In stock: 1 unit Belt dimensions: 100 x 2,000 mm Tube diameter: 20 – 76.1 mm Manual lever adjustment: 1 Motor power: 3 kW Weight: 190 kg DEMONSTRATION MACHINE / AS-NEW CONDITION Operation of the AL100U-01 model is by means of a lever. With the AL 100U model, you can notch material from Ø 20 to Ø 76.1 mm. The support cross and the sliding carriage with rotatable clamp are infinitely adjustable, allowing all tube profiles to be notched at any desired angle from 30° to 90°. The ALMI AL100U-01 machines out square, rectangular, and round tubes of various wall thicknesses and is suitable for all common materials. Thanks to the ALMI belt adjustment system, setting the sanding belt using the included hex key has become even easier. The sanding belt can be quickly tensioned, and changing the sanding rollers can be accomplished in just a few seconds. All tube notchers are equipped with a deburring table. Includes 5 sanding belts and 1 sanding roller, Ø 42.4 mm.

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Redpofxyhfjfx Agisp Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Sąlyga: geras (naudotas), Gamybos metai: 1995, Offer 24315 Technical Data: - Sanding belt dimensions: 2000 x 100 mm - Surface grinding opening: 400 x 100 mm - Support vice – angle adjustable: 90° to 30° - Fine adjustment of support via handwheels - Sanding belt speed: 30 m/sec - Contact wheel / sanding roller: Ø 42 mm - Drive: 400 V / 2880 rpm / 3 kW - Required space (approx.): W 700 x H 1200 x D 1200 mm - Weight (approx.): 225 kg - 10 contact sanding rollers, approx. diameters: Rodpfst Stfhex Agisp Ø 10 + 18 + 22 + 24 mm Ø 28 + 33 + 36 + 48 + 60 + 68 mm

Sąlyga: geras (naudotas), Gamybos metai: 1996, Offer 24337 Technical Data: - Abrasive belt dimensions: 2000 x 100 mm - Surface grinding opening: 400 x 100 mm - Support vise – angle adjustable from 90° to 30° - Fine adjustment of support via hand lever - Abrasive belt speed: 30 m/sec - Contact wheel / grinding roller for approx. Ø 42 mm - Drive: 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm Rsdjvbfh Ropfx Agiop - Weight approx. 225 kg - Various contact wheels

Sąlyga: naujas, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with separate wire feeder. Its advanced digital technology and duty cycle deliver outstanding arc characteristics for industrial MIG/MAG applications. Integrated synergic controls make setup simple and reduce spatter during welding. Equipped with the WF wire feeder, it offers precise welding parameter control to ensure perfect quality. MULTIPROCESS Redpfx Ajmxkdpogiep MIG/MAG: - Steel and stainless steel wire: Ø 0.6 to 1.6 mm - Aluminium wire: Ø 0.8 to 1.6 mm - CuSi and CuAl wire: Ø 0.8 to 1.6 mm - Cored wire (polarity reversal): Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulosic electrodes. TIG DC Lift / Pulsed. Gouging.

Sąlyga: paruoštas naudoti (naudotas), bendras ilgis: 900 mm, bendras plotis: 400 mm, bendras aukštis: 1 100 mm, tuščias svoris: 140 kg, dujų vamzdis: Ø50 x 3,91 mm plieninis vamzdis: Ø60 x 3 mm nerūdijančio plieno vamzdis: Ø60 x 2 mm varinis/aliumininis vamzdis: Ø64 x 4 mm pilnaviduris strypas: Ø35 mm pilnaviduris stačiakampio formos strypas: 60 x 10 mm Rjdpfx Agsxlliroisp plokščias strypas (kietas): 60 x 16 mm plokščias strypas (lengvai lenkiamas): 60 x 30 mm stačiakampis profilis: 60 x 30 x 4 mm maksimalus spindulys: 200 mm lenkimo greitis: 1,25 - 2,5 aps./min vaizdo įrašas spauskite čia Variklio galia: 1,5 kW

Sąlyga: naujas, Gamybos metai: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal addition for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The unit can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is securely clamped onto the rotary table using the clamping device and is bent around the bending tool. With this system, leg lengths to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy in bending operations. TECHNICAL DATA: • Bending capacity steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edged tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° optional OUR SERVICE: • Test production welcome at our facility in the demo room • Consulting and information meeting at your location • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance available at your location Rsdjnh R Ekopfx Agisp