300 KN gervė

Siebert KW30-

Būklė: geras (naudotas), Throughfeed line for door leaf processing, high-performance machine capable of processing a single door leaf (lock case, handle, and hinges) in approximately 30 seconds. Hedpfx Afjuq Scpsdjn The machine consists of two units, each equipped with left and right sections that perform specific operations. In the first unit, the left section mills the faceplate for the lock and drills for the handle and key, while the right section simultaneously drills for hinges. In the second unit, the left section creates and deepens the lock case pocket, while the right section simultaneously screws in the hinges.

Būklė: naujas, Hydraulic Winch HAW1700 with Electric Valve incl. Manual Control and Radio Remote Control, suitable for mounting on log splitters, cranes, mini excavators, tractors, forklifts, crawler mowers, and telehandlers, ideal for viticulture and horticulture, as well as agricultural, construction, and forestry applications, and many other uses. Equipped with an electric hydraulic valve and radio remote control. The HAW1700 hydraulic attachment winch makes many tasks significantly easier. Maximum rope capacity: 30 m with 6 mm wire rope. Standard configuration: 20 m of 6 mm wire rope. • Pull and position firewood for splitting • Pull logs onto trailers • Extract root stumps and trees • As an attachment winch for forwarding cranes and small excavators • As a winch for small tractors and narrow-track tractors Robust steel construction with universal mounting points (bottom, rear, and top) with M12 thread. This allows highly flexible winch installation. Large, dual-supported cable drum ensures extended wire rope lifespan. The standard pulling force is 1,700 kg. The winch can be installed in various positions. Optional hydraulic brake available. Depending on your required pulling speeds and forces, we can offer you different options. Get in touch—our team will be happy to advise you. Hjdpfefn Tvhsx Afdjn • Max. operating pressure: 225 bar (peak) • Continuous operating pressure: 175 bar • Displacement: 400 cc • Torque at 225 bar: 870 Nm (peak) • Continuous torque: 380 Nm • Max. pulling force: 1,700 kg • Weight: 49 kg • Rope speed: 47 m/min at 60 L/min oil flow • Colour: red • Including hoses from valve to motor Dimensions: • Length: 500 mm • Length with rope guide: 570 mm • Front width: 120 mm • Rear width: 180 mm • Bearing width: +30 mm • Motor width: +200 mm • Height: 250 mm Included: Remote control for winch. • Control range: up to 100 m • Temperature range: -35°C to +80°C • Protection class: IP65

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, Arburg Allrounder 420C 1000-350/150 Arburg Two-shot Injection Molding Machine with 100 tons clamping force. Year of manufacture: 2002. 79,115 operating hours. The machine is delivered fully refurbished by our team of technical experts and in perfect working condition. We can offer commissioning on your premises, thereby guaranteeing proper operation. Extras: Rotary table, Geiger robot, Wanner granulator. Technical Details CLAMPING FORCE: 1000 kN SCREW DIAMETER: Horizontal 40mm bimetallic SCREW DIAMETER: Vertical 25mm INJECTION PRESSURE: 2500 BAR vertical / 2120 BAR horizontal INJECTION VOLUME: Horizontal: 182cm³ Hjdjp Audqspfx Afdjn INJECTION VOLUME: Vertical: 54cm³ TIE BAR DISTANCE: 420x420mm MINIMUM MOLD HEIGHT: 250mm MAXIMUM DAYLIGHT BETWEEN PLATENS: 750mm OPERATING HOURS: 79,115 YEAR OF MANUFACTURE: 2002

Būklė: geras (naudotas), filtravimo plotas: 75 m², slėgis: 15 juosta, Unit: Used chamber filter press (refurbished) Design: Side-bar guided Construction: Customized according to customer requirements, e.g., also mounted in a container Plate size: 800 x 800 mm Number of plates: 68 Filter plates: PP (polypropylene) Cake thickness: 30 mm Discharge: closed Filter cloths: optionally available, tailored to the medium Filtration area: approx. 75.21 m² Press volume: approx. 1081.2 dm³ Plate pack length: approx. 4243 mm Filtration pressure: approx. 15 bar Plate shifting: manual Plate closing: electro-hydraulic plate closing system Safety equipment: optional according to customer requirements and configuration Accessories: optional, available as special equipment Control cabinet: optional Electrics: electrical wiring of all components optional Pump technology: optional Condition: refurbished Purchase or rental: Units can be inspected at our facility by appointment. Hedpfx Afjqakhusden Would you like to rent or purchase this unit? Contact us—we are happy to assist you.

Būklė: labai geros būklės (naudotas), Mažai naudotos automatinės TC, TU, TZ profilių gamybos staklės, Skirtos gaminti, valcuoti TC, TU, TZ profilius iki 1.5 mm metalo storio. Techninė specifikacija Pagaminta: Estijoje Reguliuojamas profilio aukštis: 100 – 250 mm Hjdpfjx Sx R Ssx Afdjn Profilio kraštinė: 50 mm Profilio kraštinės užlenkta: 15 mm Minimalus valcuojamo lakšto storis: 1 mm Maksimalus valcuojamo lakšto storis: 1.5 mm Atstumas tarp volų: 300 mm Staklių matmenys: 900 x 4000 mm Staklės neturi giljotinos, perforavimo volų. Valdymas paprastas, dviem knopkem. Jei turėsite daugiau klausimų, mielai atsakysime.

Būklė: naudotas, Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Complete line consisting of: 1. Angelo Cremona Peeling Lathe – detailed description available below 2. Angelo Cremona Dryer – description and photos available in listings 3. CMP Press – description and photos available in listings 4. Imeas Sander – description and photos available in listings 5. Raute Composer – description and photos available in listings PEELING PLANT consisting of: Centering Loader 1. model CE08 2. Angelo Cremona 3. Positions logs for loading onto the peeling lathe 4. Power supply 400Vac/50Hz – 50kW Maximum hydraulic pressure 100 bar Compressed air consumption 0 L/min Weight kg Maximum dimensions 600x300x400 5. Output capacity 4 logs per minute Peeling Lathe 1. model SFH870 2. Angelo Cremona 3. Produces a continuous sheet of veneer by turning the log 4. Power supply 400Vac/50Hz – 240kW Maximum hydraulic pressure 100 bar Compressed air consumption 10 L/min Maximum dimensions 600x400x300 5. Production capacity 50 cubic metres per shift Cutting and Sorting Line 1. model TSR27 2. Angelo Cremona 3. Conveys the peeled ribbon to the guillotine for optimized sheet cutting 4. Power supply 400Vac/50Hz – 70kW Maximum hydraulic pressure 100 bar Compressed air consumption 0 L/min Maximum dimensions 300x200x200 Hjdpfjvm An Eox Afdsn 5. Production capacity 50 cubic metres per shift Grading Line and Vacuum Stacker 1. model LTR27 2. Angelo Cremona 3. Separates and stacks recovery sheets from full-format sized sheets 4. Power supply 400Vac/50Hz – 180kW Compressed air consumption Maximum dimensions 300x1300x500 5. Production capacity 50 cubic metres per shift

Būklė: geras (naudotas), Hydraulic power pack, hydraulic pump, universal unit, hydraulic station -Manufacturer: Rexroth/Hydraudyne, hydraulic station with oil cooler / accumulator / filter ... -Type: 03 HDJ -Motor power: 22 kW / 1460 rpm -Tank capacity: approx. 240 litres -Pressure display: up to 250 bar -Individual components: accumulator / hydraulic tank / filter / valves, see pictures Hsdpfxegz Irvs Afdjn -Quantity: 2 units available -Price: per unit -Dimensions: 1060/820/H1530 mm -Weight: 738 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, 300 kg load capacity welding positioner, with 125 mm hollow shaft diameter with 320 mm or 400 mm chuck very robust design Infinitely variable speed control from 0.15 to 5.0 rpm Hjdpfxolamtbj Afdon Current transmission up to 350 A Turntable diameter 400 mm Tilting up to 135° Height (horizontal) 835 mm, tilted to center approx. 735 mm Length 850 mm x width 580 mm

Būklė: geras (naudotas), Winch, lifting winch, construction winch, anchor winch Hodpfx Afsb A Hpcjdjn - Mechanical wire rope winch - Switchable pulling force: 1,250 kg / 5,000 kg - With freewheel and mechanical brake - Drum: Ø 300 mm - Side discs: Ø 600 mm - Drum length: 800 mm - Operation: by hand lever - Quantity: 3 units available; 1 unit with 12 mm diameter rope - Price: per unit - Dimensions: 1200/1200/H950 mm - Weight: 684 kg per unit

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, naudotas Weishaupt degiklis ----- RGL70 2-A/ ZM gamybos metai: 2000 Hodpfx Ajxf Dzyofden galia: 1.000 - 10.500 kW