Vienos kolonos presas - hidraulinis

SICMI PCL 100 A

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1983, Press force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 - 120 mm Installation height: 450 mm (maximum stroke, top position) Ram reinforcement: 100 mm Table size: 850 x 810 mm Nsdpfxegpxc Sj Agisku Pass-through opening: 00 x 0 mm Ram surface: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guidance - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Manual stroke adjustment - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Nkedpfx Agsfxyhfeiju Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Sąlyga: naujas, High-performance thread tapping machine with leadscrew device. Safety feature to prevent tool breakage. Programs for single and continuous cycle operation, programmable thread depth, piece counter, LED lamp, and electronically controlled motor braking for single cycle operation. Easy leadscrew change via quick coupling. Drilling capacity: 15 mm Thread cutting capacity: M 3 – M 10 Threads per hour: 1,000 Spindle: MK 2 Thread depth: 60 mm Drilling depth: 100 mm Nkedjfrlndopfx Agisu Throat: 250 mm Spindle-to-table distance: 185 to 541 mm Table dimensions: 340 x 445 mm T-slot width: 12 mm Column diameter: 90 mm Overall height: 1,050 mm Weight: 120 kg Special motor: 0.55 kW Power supply: 400 V/50 Hz BT 18 GL M00033 4 spindle speeds: 320 rpm, 560 rpm, 1,000 rpm, 1,600 rpm Also available as pillar drilling machine BS 18 GL (M00034)! Digital speed display as standard equipment. Column available 200 mm longer: 14154

Sąlyga: naujas, MAXION BT 20 Bench Drill Powerful MK2 machine featuring an easy-scroll control wheel and large display. Digital drilling depth, piece counter, fine adjustment for drilling depth, and LED light all come as standard equipment. Thus, the new BT20 combines innovative features with proven drive technology. Technical Data: Normal drilling capacity: 20 mm Thread cutting capacity: M 16 Spindle: MK 2 Drilling depth: 100 mm Throat: 215 mm Distance spindle/base plate: 185 – 541 mm Table size: 340 x 445 mm T-slot width: 12 mm Column diameter: 90 mm Overall height: 990 mm Weight: 120 kg Motor, pole-changing: 0.6/1.2 kW Power supply: 400 V/50 Hz Nodjf Nrbfepfx Agisku Two spindle speed ranges available: MAXION BT 20 (M00027) Infinitely variable spindle speeds: 100 – 1,800 rpm MAXION BT 20 (M00028) Infinitely variable spindle speeds: 240 – 3,600 rpm Optional Accessories Drilling kit Thread cutting device with digital depth display Column 200 mm longer Cross table MF3 Base cabinet Electric cooling system Note: ALSO AVAILABLE AS COLUMN DRILLING MACHINE

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, veikimo valandos: 5 157 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 642106, Precizinis lygintuvas dalims, kurių storis 2-23 mm, iki 1300 x 1250 mm Nkedpfxewa Nvbs Agieu

Sąlyga: naujas, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height: 95–240 mm Table surface: 160 x 110 mm Spindle diameter: 25 mm Njdefv Awajpfx Agijku Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver full pressing force across the entire stroke length. They are primarily used when long-stroke components must be processed with constant force. Convincing technology - Long and precise spindle guidance for maximum dimensional accuracy - Hardened and ground piston rod for virtually unlimited service life - Double-acting cylinder with end position cushioning on both sides - Dual guide rings in the piston for consistent, smooth operation - Oil-resistant sealing elements Key features of the PND series - Spindle secured against rotation - On the PND 85/S, spindle return is only via a single cylinder chamber for additional air saving - Working height fine adjustment is simple, quick, and precise in two stages: – Basic adjustment by simply loosening the clamping screws on the column – Precision fine-tuning via the stroke limit ring on the piston rod Additional advantage: Faster cycle time and reduced air consumption

Sąlyga: naudotas, Gamybos metai: 2007, Pressure: 100 t Stroke: 500 mm Table dimensions: 900 x 600 mm Rapid traverse: 22 mm/s Stroke speed: 2 mm/s Ram surface: 700 x 350 mm Total power requirement: 2.2 kW Nkedevprv Rjpfx Agiou Machine weight approx. 1.6 t Space requirement approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press This machine is an Italian-made SICMI model, which was distributed by Knuth.

Sąlyga: naujas, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating energy: 1370 Nm Single stroke energy: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Passage opening in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Passage opening in table: 80 mm Machine weight approx. 1.9 t Nksdpfx Agjb U Hwnoieu - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Sąlyga: labai geros būklės (naudotas), Dual-head projection welding machine DALEX PMS 14-4 Nominal throat depth: 350 mm Rated power at 50% duty cycle: 160 kVA Secondary short-circuit current: 79.4 kA Secondary open-circuit voltage: 5.8 - 9.74 V Electrode force: 120-720 daN Equipped with 2 double-acting cylinders with approach stroke Mounted control cabinet according to VDE 0100 Main switch Nsdod Ip Aljpfx Agijku 4-position switch Synchronous welding control with monitoring function MPS 8043 Q1 Current measuring belt Cylinders can be operated in cascade or simultaneous mode Weight: 1090 kg Machine is currently being refurbished

Sąlyga: geras (naudotas), Gamybos metai: 2006, mašinos/transporto priemonės numeris: 860027, Offer 24331 Technical Specifications: - Table surface: 1700 x 550 mm - Manual travel paths X / Y: 1300 x 500 mm - Drilling machine manufacturer: MAXION, Model: BT 18 STP - Drilling capacity up to: 18 mm - Thread cutting attachment up to: M 16 - Drill spindle taper: MK 2 Njdpfeu Aq Amjx Agijku - Drill spindle stroke with fine depth adjustment: 76 mm - Pneumatic feed unit: PV 12 - Throat depth: 670 mm - Spindle speeds: 100 – 1800 rpm - Spindle speeds: 200 – 3600 rpm - Motorized stroke of the drilling unit - Motorized table clamping x + y - Minimum quantity lubrication - Pneumatic connection: 6 bar - Electrical connection: 400 V - Required space approx.: W 1750 x H 1600 x D 1000 mm - Weight approx.: 1200 kg