Plokštinė pjūklas

SELCO WNA 610 Twin Pusher

Būklė: nepatikrintas (naudotas), Gamybos metai: 2007, Funkcionalumas: nepatikrintas, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 20 mm, valdiklio modelis: POWER CONTROL PC22, sukimosi greitis (maks.): 12 000 aps./min, Auction extended by one week due to updated technical data! TECHNICAL DETAILS Nwodpfx Afoyqx U Hsnjd Workpiece Dimensions Panel height: min. 12 mm Panel height: max. 60 mm Edge thickness: min. 0.4 mm Edge thickness: max. 20 mm Milling and Gluing Unit Pre-milling aggregate: yes Motor power: 3 kW Speed: 9,000 rpm Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Edge Processing Unit 1 End trimming: yes Number of motors: 2 Motor power: 0.80 kW Speed: 12,000 rpm Edge Processing Unit 2 Top and bottom coarse flush trimming: yes Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge Processing Unit 3 Corner rounding: yes Number of motors: 2 Motor power: 0.4 kW Speed: 12,000 rpm Edge Processing Unit 4 Milling unit for rough machining: yes Motor power: 4 kW Speed: 9,000 rpm Edge Processing Unit 5 Scraper blade Edge Processing Unit 6 Glue scraper blade Edge Processing Unit 7 Polishing unit: yes Number of motors: 2 Motor power: 0.18 kW Edge Processing Unit 8 Belt sanding unit: yes Motor power: 1.5 kW Control software: POWER CONTROL PC22 Total connected load: 42 kW

Būklė: nepatikrintas (naudotas), Gamybos metai: 2014, Funkcionalumas: nepatikrintas, galia: 25 kW (33,99 AG), ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 12 mm, X ašies padavimo greitis: 18 m/min, Įranga: CE žymėjimas, TECHNICAL DETAILS Panel height min.: 8 mm Nwodoytr Rgopfx Afned Panel height max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Max. feed speed: 18 m/min Sequence of operating steps: Section 1 Operation: Positioning Motor power: 2.5 kW Automatic control Edge heater Glue tank Glue preheater Roll magazine Section 2 Operation: Trimming Number of motors: 2 Section 3 Operation: Edge milling Number of motors: 2 Motor power: 0.55 kW NC positioning Section 4 Operation: Rounding Number of motors: 2 NC positioning Section 5 Operation: Milling Number of motors: 1 Motor power: 3.5 kW Section 6 Operation: Edge scraping Section 7 Operation: Glue scraping Section 8 Operation: Brushing Number of motors: 2 MACHINE DETAILS Total power: 25 kW EQUIPMENT Panel support guide Spraying unit Control system with more than 20 controller types CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the point of destination. External reference: 6216

Būklė: nepatikrintas (naudotas), Gamybos metai: 2008, Funkcionalumas: nepatikrintas, X ašies eiga: 4 175 mm, Y ašies eiga: 1 550 mm, ruošinio aukštis (maks.): 40 mm, ašies skaičius: 30, važiuojamoji greitis (maks.): 80 000 mm/min, TECHNICAL DETAILS X-Axis Travel: 4,175 mm Y-Axis Travel: 1,550 mm X-Axis Traverse Speed: 80 m/min Y-Axis Traverse Speed: 80 m/min Z-Axis Traverse Speed: 30 m/min Max. Workpiece Height: 40 mm Njdpfx Asyttcwsfnswd Number of Suction Traverses: 8 Spindles Number of Vertical Drilling Spindles: 20 Number of Horizontal Drilling Spindles (X-direction): 10 Total Number of Spindles: 30 Milling Unit Number of Controlled Axes: 4 + Flex5 Motor Power: 15 kW Automatic Tool Changer Liquid-cooled Saw Unit Tool Magazine 1 Number of Slots: 18 Tool Magazine 2 Number of Slots: 10 EQUIPMENT NC positioning of suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 7350

Būklė: nepatikrintas (naudotas), Gamybos metai: 2008, Funkcionalumas: nepatikrintas, valdiklio modelis: POWERCONTROL, ruošinio ilgis (maks.): 4 300 mm, ruošinio plotis (maks.): 2 200 mm, X ašies padavimo greitis: 80 m/min, TECHNINĖS DETALĖS Didžiausias plokštės plotis: 2.200 mm Didžiausias plokštės ilgis: 4.300 mm Didžiausias pagrindinio pjūklo išsikišimas: 125 mm Didžiausias padavimo greitis: 80 m/min Pjovimo agregatas Didžiausias įrankio skersmuo: 450 mm Variklio galia: 13,5 kW Graviravimo agregatas Didžiausias įrankio skersmuo: 180 mm Variklio galia: 2,2 kW MAŠINOS DUOMENYS Valdymas: POWERCONTROL Apdirbimo stalas Kėlimo stalo lygių skaičius: 4 Spaustuvų skaičius: 10 Nedpfx Asyttqzjfnjwd Mašina parduodama ir pristatoma faktinėje bei teisinėje būklėje („kaip matyta ir patiko“) pagal fotodokumentaciją ir techninius/komercinius aprašomuosius dokumentus. Pirkėjas turi teisę apžiūrėti prekę prieš atsiimant ir prisiima atsakomybę už įrengimo, tvirtinimo bei naudojimo darbus paskirties vietoje. Išorinė nuoroda: 5552

Būklė: nepatikrintas (naudotas), Gamybos metai: 2005, Funkcionalumas: nepatikrintas, galia: 19 kW (25,83 AG), X ašies eiga: 4 175 mm, Y ašies eiga: 1 730 mm, ašies skaičius: 20, Įrankių bokštelio 1 įrankių stočių skaičius: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverses: 8 Number of tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Nwsdpfoyttf Sjx Afned Number of spindles for horizontal drilling in X direction: 2 Number of spindles for horizontal drilling in Y direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, milling cutters and aggregates are not included in the scope of delivery. Safety guards are supplied as available (left side only). The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6906

Būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, galia: 55 kW (74,78 AG), Gamybos metai: 2010, sukimosi greitis (maks.): 2 965 aps./min, TECHNINĖ INFORMACIJA Nwsdpfx Aeyttk Iofnjd Variklio apsukos: 2.965 aps./min. Maksimalus darbinis slėgis: 8,5 bar Oro džiovintuvas Modelis: ABT 102 suspausto oro džiovintuvas Maks. darbinis slėgis: 21 bar MAŠINOS DUOMENYS Valdymo modelis: HMI PLC KAESER Variklio galia: 55 kW Darbinė įtampa: 400/460 V Įrenginys parduodamas ir pristatomas faktinėje ir teisinėje būklėje („kaip matyta ir patiko“) remiantis fotodokumentacija ir technine/komercine aprašomąja medžiaga. Pirkėjas turi teisę apžiūrėti prekę prieš atsiėmimą ir atsako už įrangos montavimą, įtvirtinimą bei naudojimą paskirties vietoje. Išorinė nuoroda: 7548

Būklė: nepatikrintas (naudotas), Gamybos metai: 2004, Funkcionalumas: nepatikrintas, ruošinio aukštis (maks.): 60 mm, ruošinio plotis (maks.): 2 800 mm, briaunos storis (maks.): 20 mm, valdiklio modelis: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling head with CNC positioning Unit 2: Milling unit with NC positioning, hot-melt glue container, pre-press unit for hot-melt glue Edge Joining + Edge Processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timing Unit 5: Milling machine (1 motor) with automatic timing Unit 6: Belt sanding machine (1 motor) Nwjdsyttrxjpfx Afnsd Unit 7: Belt sanding machine (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed chains: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6561

Būklė: nepatikrintas (naudotas), Gamybos metai: 2016, Funkcionalumas: nepatikrintas, briaunos storis (maks.): 22 mm, sukimosi greitis (maks.): 12 000 aps./min, Įranga: CE žymėjimas, The machine has the following configuration: Pre-milling unit automatic, time-controlled intervention and positioning via NC lamps for preheating the panel edge edge strip magazine glue pot for EVA hot-melt adhesive premelter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and bottom flush trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine trimming and corner rounding unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm automatic, time-controlled intervention Nwodpoyxndbofx Afned Cut-off saw unit RB02 Positioning via NC Glue scraper unit RCC-701 Polishing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber belt Panel support guides with NC positioning CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. External reference: 7673

Būklė: naudotas, mašinos/transporto priemonės numeris: 005711, Max. panel width: 4500 mm Max. panel length: 2200 mm Nsdpfx Afehvm Dienewd Max. main saw blade projection: 95 mm Number of longitudinal clamps: 5 Number of cross clamps: 8 Second flexible hold-down: yes