Ciklo valdomas tekinimo staklės

SEIGER SLZ 1200 x 6000

Sąlyga: naudotas, Gamybos metai: 2007, x-axis 10,100 mm (2x 5,000 mm) Hjdjvy Ihdspfx Agiei y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Maximum clearance between columns: 3,000 mm Maximum clearance height: 1,950 mm Maximum distance from spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Main spindle speed range: up to 18,000 rpm Main spindle drive power: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Type P 8002320/00-4 Main spindle speed range: 20 - 5,000 rpm Main spindle drive power: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Table clamping surface: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool positions: 327 pcs. Number of tool positions HSK A63: 156 pcs. Number of tool positions HSK A100: 171 pcs. Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total connected load: 150 kVA Space requirement approx. 25.0 x 12.0 x 7.0 m 5-Axis Gantry Large Machining Center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools subject to agreement

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, šlifavimo ilgis: 620 mm, plotis centre: 680 mm, šlifavimo disko skersmuo: 350 mm, bendras plotis: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the machine - Replacement of the X-axis feed screw - Replacement of the main bearings in the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to an as-new condition Geometry: - Scraping the X-axis guideway - Scraping the Z-axis guideway - Grinding the X-axis table - Grinding the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle head, grinding spindle head, and tailstock) - Preparation of a measurement protocol for the TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be newly painted; the remaining parts of the machine will retain the original paintwork Hedjrz Nflspfx Agiei Electronics: The entire machine's electronics will be checked and tested; defective switches and cables will be replaced

Sąlyga: naujas, Suction capacity at filter unit nozzle*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte Hodpfxsh Rdwxe Agisi *Depending on filter configuration Special voltages or special colours available on request Application: Extraction of oil mist and smoke, suitable for small to very large machine workspaces | Oil mist separator Advantages of the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC as standard (digital filter control) - Electronically regulated EC fan as standard - Adjustable speed and air flow - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of air flow capacities available - Can be adapted to pollutant load and air flow requirements - Extensive range of installation and connection accessories - Quality Made in Germany We developed the ELBARON® filter series for use in metalworking with straight oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most powerful filters on the market and are used worldwide. Our filter units are already fully digitalized as standard and can, for example, be controlled via laptop. The ELBARON® product range includes 18 device variants and can be optimally configured in terms of size and capacity for your specific application. ELBARON® units impress with long service life and total operational reliability. Our electrostatic filter cells are dimensioned to provide the best possible filtration efficiency, service life, and trouble-free operation while maintaining economic efficiency.

Sąlyga: naudotas, Manufacturer: LORENZ Model: LS 630 Condition: Used Stock number: DCL1722 Module: 12 Maximum diameter: 630 mm Working stroke: 220 mm Distance between table and cutter spindle: 450 mm Machine weight: 10,000 kg Table bore diameter: 450 mm Table diameter: 730 mm Spindle diameter: 110 mm Hedpfswr Dx Uex Agioi Distance between table and spindle: 580 mm

Sąlyga: naudotas, Gamybos metai: 1969, Wheel diameter - max. 160,175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centres distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Hodpjvzhf Sjfx Agioi Cutter length max. 105 mm Centre distance between cutter and workpiece - max. 138 mm Centre distance between cutter and workpiece - min. 30 mm Milling head - swiveling 120° Cutter speeds 70 - 400 rpm Axial feed rates 0.25 - 4.0 mm/rev Radial feed rates 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Sąlyga: naudotas, Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 650 mm, Z ašies eigos atstumas: 550 mm, sukimosi greitis (maks.): 12 000 aps./min, bendras svoris: 7 500 kg, For sale: CNC 5-axis machining center from DMG, model DMU 60 P The machine is fully functional and ready for immediate operation. In 2021, a new spindle was installed and all maintenance work was carried out. Service history: 2019: New ballscrew (KGT) 2021: New spindle Hedpfxswbhq Ho Agiei 2022: Operated in single-shift operation 2023: Occasional job orders 2024: Taken out of service but still powered 12/2025: Disassembled, cleaned, and stored Technical data: X travel: 600 mm Y travel: 650 mm Z travel: 550 mm Control: Heidenhain TNC 426 Spindle speed range: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool stations: 60 Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total power requirement: 44 kVA Floor space requirement (approx.): 7.0 x 6.0 x 2.7 m Machine weight (approx.): 7.5 t No fixtures or vises included in the offer. Transport and loading can be organized Europe-wide upon request and at an additional cost. Prices are subject to VAT. Inspection possible by appointment. Please contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE/SALE OF MANUFACTURING & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell your machine? For further information or contact options, please visit our website.

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamintojas: LORENZ Tipas: S8/630 Ratlankio skersmuo: 630 mm Ratlankio plotis: 180 mm Didžiausias modulis: 8 Serijos numeris: 12371 Galia (kW): 10 Matmenys (I×P×A mm): 3000 × 2500 × 3500 Svoris (kg): 5500 Maks. ruošinio skersmuo (mm): 630 Maks. modulis: 8 Dabartinė būsena: veikianti Hodsxakzpjpfx Agisi

Sąlyga: naudotas, Gamybos metai: 1992, Technical details: Spindle diameter: 100 mm X travel: 1,500 mm Y travel: 1,450 mm Z axis: 930 mm W axis: 506 mm B axis (table): 360° CNC control: Heidenhain TNC 407 Tool holder: SK50 Spindle speed: 5 – 1,600 rpm / stepless Table load capacity: 4.0 t Hsdpfju Idqbjx Agiei Table size: 1,100 x 1,400 mm Table rotation: 360° Feed rates X/Y/W/Z axis: 2 – 2,000 mm/min Rapid traverse X/Y/W/Z axis: 5,000 mm/min Total power requirement: 40 kW Electrical cabinet dimensions: 2,000 x 600 x 2,000 mm Machine dimensions (LxWxH): 4.9 x 3.7 x 3.8 m Machine weight approx.: 14 t CNC boring and milling machine with hydraulic unit Equipment: Measuring probe electronic handwheel hydraulic weight compensation on Y axis universal milling head A wide range of accessories included – please inquire! In good condition.

Gamybos metai: 1980, Sąlyga: naudotas, Table length: 2000 mm Table width: 1800 mm Table load capacity: 12.5 t Total power requirement: 10 kW Machine weight approx.: 7.5 t Space requirement approx.: [missing value] m Table size approx.: 2,000 x 1,800 mm Maximum table load approx.: 12,500 kg Table travel (longitudinal): 1,250 mm Table height above floor: 920 mm Longitudinal feed: 0.63 - 2,000 mm/min Rotational feed (reference diameter 1000 mm): 1 - 3,150 mm/min Rapid traverse (longitudinal): 2,000 mm/min Rapid traverse (rotational, reference diameter 1000 mm): 3,150 mm/min Machine weight: 7,500 kg External dimensions L x W x H: 3,700 x 2,100 x 920 mm Total drive power: 10 kW – 380 V – 50 Hz Accessories / Special equipment: • Steel telescopic covers for the guideways • Infinitely variable table feed • Optical display for setting and reading the longitudinal adjustment • Optical device for angle setting and angle reading Condition: Satisfactory to good – ready for demonstration Delivery: Ex stock – as inspected Payment: strictly net – payable upon receipt of invoice We kindly ask you to review our offer. Please always inquire about your requirements for good used machines with us. Hjdpfx Agst Hwq Reiji

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2010, veikimo valandos: 32 498 h, X ašies eiga: 500 mm, Y ašies eiga: 450 mm, Z ašies eigos atstumas: 400 mm, nominali (akivaizdi) galia: 35 kVA, valdiklių gamintojas: Heidenhain iTNC 530, ruošinio plotis (maks.): 500 mm, ruošinio skersmuo (maks.): 630 mm, ruošinio svoris (maks.): 200 kg, bendras aukštis: 2 590 mm, bendras ilgis: 4 780 mm, bendras plotis: 4 410 mm, bendras svoris: 5 900 kg, veleno greitis (min.): 18 000 aps./min, ašies variklio galia: 35 000 W, Year of manufacture: 2010 CNC Control: Heidenhain iTNC 530 Axes Travel X-axis mm: 500 Travel Y-axis mm: 450 Travel Z-axis mm: 400 C-axis indexing degrees: 360º (0.001) B-axis indexing degrees: 0º/108º (0.001) Rapid traverse m/min: 80/50/50 NC Milling/Rotary Table: Pallet dimensions mm: Ø390 Max. workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Max. spindle speed rpm: 18,000 Spindle drive power kW: 35/25 (40% DC/cont) Spindle torque Nm: 130/87 Cooling Coolant supply through spindle bar: 40 Tool System Tool holder: HSK-A 63 Number of tools in magazine: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. tool length mm: 300 Chip-to-chip time sec.: 5 Hodpfx Agsyi Dnieisi Equipment Chip conveyor Infrared probe Rinsing gun Blow air through spindle center selectable via M-function Signal light Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat exchanger Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Prepared for internal cooling (40/80 bar) RENISHAW probe Automatic door Machine operating hours: Power-on hours: 54,257 Spindle running hours: 32,498 Total power requirement kVA: 48 Base machine: Dimensions / Weight Length mm: 4,780 Width mm: 4,410 Height mm: 2,590 Weight kg: 5,900