Generatorius, avarinis generatorius

SDMO R 165

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, veikimo valandos: 2 h, bendras ilgis: 12 200 mm, bendras aukštis: 2 890 mm, bendras plotis: 2 440 mm, galia: 1,65 kW (2,24 AG), kuras: dyzelinas, Įranga: Tipinė plokštelė prieinama, These are three emergency power generators, each with 2,000 kVA / 1,600 kW continuous output at cos phi 0.8. Voltage: 10 kV, frequency: 50 Hz. An inspection is possible in 49733 Haren. Engine manufacturer: Perkins Generator manufacturer: Stamford Design: 40" soundproof container with a noise level of 85 dB(A). Dimensions: 12,200 x 2,438 x 2,890 mm (L x W x H) Weight: approx. 35,000 kg Data sheet attached (DE and EN). Hodpfxjqqhuyj Agioi Each container is also fitted with a 2,000 L tank for initial diesel supply. The gensets are regularly load-tested.

Sąlyga: geras (naudotas), Variklis 18,5 kW Pjovimo matmenys Didžiausias rąsto skersmuo 95 cm Tarpa tarp ritinėlių 73 cm Didžiausias pjovimo plotis (tašas) 64 cm Didžiausias pjovimo aukštis virš pjūklo 39 cm Didžiausias pjovimo ilgis 12 m Galvos įranga Automatinio pjovimo storio nustatymo įtaisas Galvos judėjimas aukštyn/žemyn Elektrinis Galvos judėjimas pirmyn/atgal Elektrinis Pjūklo vedlio svirtis Elektrinė Pjūklo tempimo sistema Hidraulinė su oro pagalve Žievės nuėmiklis Pjūklų drožlių nutekėjimo anga 150 mm Pjūklo juosta Ilgis 4670 mm Plotis 38 mm 50 mm Hjdsxhb Uvepfx Agiei Pjūklo juostos kreipiamieji ratai Skersmuo 600 mm Tipas Su diržu Medžiaga Ketaus Pilna hidraulika

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Hjdpfx Agew Sy T Hsiji Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim

Gamybos metai: 1994, Sąlyga: geras (naudotas), Rivo bandsaw sharpening machine Hedpjpl D Hxofx Agiei Type GA 250

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, įėjimo dažnis: 50 Hz, Make: Pramac GWB 22 Y CDS Soundproof enclosure: 64 dB(A) at 7m Continuous output: 18.4 kVA / 14.45 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Diesel engine: Yanmar 4TNV88 BIPGE Emission standard: STAGE V Cooling system: Water-cooled Cylinders: 4 in-line Displacement: 2,190 cm³ Aspiration: Naturally aspirated Rated speed: 1,500 rpm Engine control: Mechanical Electric start Fuel consumption at 3/4 load: 3.87 litres/h Fuel consumption at full load: 5.17 litres/h Hedeq A U Axjpfx Agiei Generator: MeccAlte ECP28-M/4 or equivalent Type: Brushless Number of poles: 4 Regulation: Electronic (AVR regulation) Manual control panel: Key start Voltmeter, ammeter, hour meter, Engine fault indicator Sockets: 1 x Schuko 220V 2 x CEE 16A - 230V 1 x CEE 16A - 400V 1 x CEE 32A - 400V Dimensions: Length: 1,645 mm Width: 870 mm Height: 1,072 mm Tank capacity: 51 litres Weight: approx. 560 kg Lifting eye Forklift pockets

Gamybos metai: 2013, Sąlyga: naudotas, Cutting diameter: 420 mm Saw blade length: 41 x 5600 mm Cutting width: 1.3 mm Control system: Simatic S7 Touch Band speed: 17 - 110 m/min Saw motor: 7.5 kW Round material diameter: 420 x 3000 mm Round material diameter: 300 x 6000 mm Total power requirement: 30 kW Machine weight: approx. 18.5 t Hodpfx Aged Izmajiji Space requirement: approx. 12.5 x 5.0 x 2.5 m CNC sawing system with JAESPA Compact 4S bandsaw including round bar magazine and unloading gripper, designed for sawing round bars from 50 to 420 mm. The magazine features 6 storage compartments, each with a maximum bar weight capacity of 3,400 kg. Cutting lengths range from 20 to 1000 mm. Like-new condition, approximately 1,000 operating hours.

Sąlyga: naudotas, Gamybos metai: 2021, kuro tipas: dyzelinas, variklių gamintojas: C32, Intended use: Construction sector Unladen weight: 18,221 kg Generator output: 1,100 kVA Transport dimensions (L x W x H): 20 ft HC container Please contact the Sales Department for further information. Hsdpfjvyn A Ujx Agioi Over 85 years of sales experience in the Netherlands. A team of experts dedicated to tailoring solutions to your requirements. 1,000 operating hours or 1 year warranty: maximum security. 24/7 availability. Fast service. Large inventory, immediate delivery possible.

Gamybos metai: 2021, Sąlyga: labai geros būklės (naudotas),

Sąlyga: naudotas, Gamybos metai: 2021, veikimo valandos: 6 670 h, mašinos/transporto priemonės numeris: 241431, kuro tipas: dyzelinas, galia: 129 kW (175,39 AG), variklių gamintojas: Iveco, Naudojimo paskirtis: Statyba Tuščias svoris: 2 150 kg Generatoriaus galia: 143 kVA Hedpfx Agstr Iw Heiji Transportavimo matmenys (I x P x A): 2,99 x 1,1 x 1,5 m Daugiau informacijos teiraukitės PFEIFER GROUP.

Sąlyga: naujas, Gamybos metai: 2022, Brand new power generator set, consisting of two gensets housed in a single enclosure, based on Scania engines. Synchronisation with other generator sets or units is possible, as well as optional synchronisation with the grid. Hedpfx Agomrqi Eeiei Maximum output (E.S.P.): 902.0 kVA / 722.0 kW Rated power (P.R.P.): 820.0 kVA / 656.0 kW Controller type: ComAp InteliGen 500 User-friendly, intuitive graphical interface.