80T hidraulinė presas

SCMB (licence Bliss) PHP 80

Sąlyga: naudotas, Gamybos metai: 2021, mašinos/transporto priemonės numeris: HB 2022-A-073, Portal-type straightening press with 300 T capacity a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500 x 1600 mm d) Daylight opening 700 mm e) Overall dimensions (LxWxH) approx. 4500 x 2300 x 3700 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipples h) Table in grid construction, with T-slots as per customer request, otherwise 22 mm i) Operation via swiveling arm, mounted on the bridge j) Pressure adjustable from 50 T to 300 T via monitor k) Bridge travels using two gear motors with rack and pinion drive l) Cylinder moves left and right via rack and pinion drive m) Machine frame double-coated n) Cylinder induction-hardened Design Type of press: Portal press Thermally neutral 80 – 120 °C Number of operator sides: 3 Forces Max. press force: 3,000 kN Max. free stripping force: 500 kN Pressurization time (closed tool, steel-on-steel): max. 3 sec Dimensions Max. opening width: 700 mm Stroke and min. opening: 700 mm / 0 mm Table height above floor: approx. 900 mm Overall height above floor: approx. 3700 mm Minimum hall height: 5,000 mm Deflection Measured at max. closing force with 70% occupancy: ≤ 0.8 mm/m Weight Total weight of press without operating fluids and table plate: approx. 22 T Speeds Fast closing: 17 mm/sec Pressing speed: 8 mm/sec Opening: 55 mm/sec Noise Level Sound pressure level, measured at 1.5 m height at the operator panel: max. 78 dB(A) (DIN 45635-T16-KL3) Hedpeh Agnuofx Abmofr Hydraulics Number of press cylinders: 1 Max. operating pressure: 350 bar Pressurization time: approx. 2–3 sec Pressing accuracy during stroke: +/- 5 bar Main Pump BOSCH REXROTH, approx. 93 L/min Oil volume: ca. HLPD 46 MW, 900 liters Ambient temperature max.: 45 °C Oil temperature max.: 55 °C Electrics Main power supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic main motor connection: IE3, 22 kW Total connected load: approx. 30 kW

Sąlyga: naudotas, Gamybos metai: 2007, Spaudimas: 315 t Ramsčių atstumas: 1750 mm Eiga: 700 mm Atstumas tarp stalo ir slankiklio, didžiausia eiga viršuje, reguliuojama viršuje: 1200 mm Stalo paviršius: 1600 x 1500 mm Traukimo pagalvės spaudimas stale: 125 t Traukimo pagalvės eiga stale: 200 mm Traukimo pagalvės paviršius stale: 1200 x 1400 mm Stalo aukštis virš grindų: 750 mm Slankiklio paviršius: 1640 x 1500 mm Pavaros galia: 55,0 + 11,0 kW Svoris: 29,5 t Užimamas plotas (PxGxA): 3,2 x 4,5 x 5,8 m Hfodpovuukbefx Abmjr Aukštis virš grindų: 5,1 m Pagaminimo metai: 1983 2007 m. Siemens S 7 valdymo modernizacija Leista rankiniam padavimui pagal CE standartus Su alyvos hidraulinė pavara, hidrauline traukimo pagalve stale, hidrauliniu kirpimo smūgio slopinimu Galima siūlyti be paleidimo, su paleidimu esamoje būklėje arba, kaip alternatyva, su nauja Siemens S 7-1500 F valdymo sistema

Sąlyga: naudotas, Pressing force: 600 TON Hsdpfxsq N Etts Abmsfr Number of drawing points: 2 Model: AF 600 MB 30-60 Year of manufacture: 1994 Table size: 3,000 x 1,600 mm Ram size: 3,000 x 1,600 mm Front opening: 3,000 mm Side opening: 1,200 mm Ram adjustment: 150 mm Strokes per minute: 20 spm Stroke length: 500 mm Die height at BDC: 1,118 mm Main motor power: 30 kW Hydraulic safety: Yes Weight: 110 tons

Sąlyga: naudotas, Gamybos metai: 2005, Spaudimas: 800 t Hodpfx Abjvuuikomsfr Statramsčių tarpas: 2560 mm Eiga: 1050 mm Atstumas tarp stalo ir stūmoklio, viršutinėje padėtyje: 1870 mm Stalo matmenys: 2500 x 1730 mm Tempimo pagalvės spaudimas stale: 300 t Tempimo pagalvės eiga stale: 395 mm Tempimo pagalvės plotas stale: 2300 x 1300 mm Stūmoklio plotas: 2500 x 1730 mm Tempimo pagalvės spaudimas stūmoklyje: 63 t Tempimo pagalvės eiga stūmoklyje: 150 mm Šoninis statramsčių tarpas: 1000 mm Alyvos talpa: 4300 l Variklio galia: 200,0 kW Užimama vieta (IxPxA): 4,1 x 2,8 x 10,0 m Aukštis virš grindų: 7,0 m Pagaminimo metai: 1974 Renovuota 2005: buvusi BZE 800, gamintojo perstatyta į ZE 800 su nauju stūmokliu ir nauju cilindru Alyvos hidraulinė pavara, hidrauliškai valdoma tempimo pagalvė stale ir stūmoklyje Išmontuotas, sandėliuojamas – vaizdo įrašas prieinamas pas savininką prieš išmontavimą.

Gamybos metai: 1990, Sąlyga: naudotas, Pressure: 250 t Clearance between uprights: 1100 mm Stroke: 400 mm Installation height: 600 mm Table dimensions: 1000x800 mm Hodpfolp U I Ejx Abmofr Ram area: 1000x800 mm Table height: 950 mm Total power requirement: 65 kW Machine weight approx.: 25 t Space requirement (WxDxH): 0000x0000x3900 mm NC control Cutting impact damping Light curtain control Centralized lubrication Rapid traverse / working feed 8-fold prism guide

Sąlyga: naudotas, Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, įrengimo aukštis: 700 mm, spaudimo jėga: 250 t, stalo plotis: 1 250 mm, stalo ilgis: 1 150 mm, štampo pagalvėlės eiga: 150 mm, eigos ilgis: 400 mm, Hydraulic Double Column Press DUNKES HDS 250/10 Year of manufacture: 1992 Technical data: Pressing force at 260 bar: 250 t Rapid approach speed: 365 mm/s Hfedoup Si Hopfx Abmsr Table clamping area approx.: 1150 x 1250 mm Ram clamping area approx.: 1150 x 1250 mm Blank holder area approx.: 800 x 1000 mm Blank holder force (200 bar): 100 t Blank holder stroke: 150 mm Power requirement: 45 kW Installation height: 700 mm Ram stroke: 400 mm Control system retrofitted to SIEMENS (in 2005) Machine height approx. 5,400 mm Control language currently: Polish

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 2 000 t, stalo plotis: 1 500 mm, stalo ilgis: 2 500 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS - Steel construction body and components, stress-relieved by vibration method - 8-sided guide/slideways for high precision and long service life - PLC control and touchscreen panel - Argon welding application for fixing elements and steel drawn pipes Hjdpfx Aevy A Dyjbmofr - EN ISO 15614-1/2017 welding application certificate, WPQR and WPS approved, accredited by TÜRK-AK (Welding applications are supervised by 'welding coordination engineers' certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances applied according to ISO and DIN standards (≤ 120 microns/metre) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical consumables - Automatic centralized lubrication system - Two-hand control - Cooling system TECHNICAL SPECIFICATIONS FOR 2000 TON H-TYPE HYDRAULIC PRESS TYPE STEEL CONSTRUCTION, H-FRAME WITH 8 GUIDES FRAME MATERIAL St52 – ERDEMİR SLIDEWAY BEARING MATERIAL BRONZE Zr14 CAPACITY (RAM) 2000 TON MOVABLE TABLE SIZE 1500 x 2500 mm FIXED TABLE SIZE 1500 x 2500 mm PARALLELISM TOLERANCE 120 micron/m PERPENDICULARITY TOLERANCE 60 micron/m STROKE (RAM) 1000 mm MINIMUM CLEARANCE 200 mm MAXIMUM CLEARANCE 1200 mm STRESS RELIEF Vibration stress relief WELDING APPLICATION EN ISO 15614-1/2017 welding certificate, approved by TÜRK-AK-accredited WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) MAX. OPERATING PRESSURE 250 Bar TOTAL MOTOR POWER 180 kW– IE3 MAIN PUMP 140 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DOWN SPEED 150 mm/s MOVABLE TABLE PRESS SPEED 12 mm/s MOVABLE TABLE RETURN SPEED 170 mm/s MAIN CYLINDER INNER DIAMETER Ø 720 mm – Ck45 – 2 units AUXILIARY ACCELERATION CYLINDERS 2 units APPROX. HEIGHT OF PRESS 6300 mm APPROX. WIDTH OF PRESS 3850 mm APPROX. DEPTH OF PRESS 2500 mm BOTTOM TABLE HEIGHT FROM FLOOR 1500 mm FRONT FILL VALVE NG 200 HYDRAULIC UNIT REXROTH or PARKER COOLING SYSTEM EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION REXROTH or PARKER MOTOR CLASS USED FOR UNIT IE3 LEVEL GAUGE REXROTH or PARKER AIR FILTER REXROTH or PARKER – 10 MICRON FILTER RETURN FILTER REXROTH or PARKER – 25 MICRON FILTER OIL & TEMPERATURE INDICATOR REXROTH or PARKER VALVES USED REXROTH or PARKER FILTER CONTAMINATION WARNING ELECTRONICALLY CONTROLLED LUBRICATION TYPE AUTOMATIC – (ADJUSTABLE VIA SCREEN) RAM STROKE ADJUSTMENT ADJUSTABLE VIA SCREEN RAM TONNAGE (PRESSURE) ADJUSTMENT ADJUSTABLE VIA SCREEN SYSTEM ERROR MESSAGES VISIBLE ON SCREEN PRESS STATUS INFORMATION VISIBLE ON SCREEN TOOL MEMORY ADJUSTABLE VIA SCREEN HYDRAULIC UNIT OIL TEMPERATURE INFO VISIBLE ON SCREEN LINEAR SCALE NOVATECHNIK or TURCK PLC APPLICATION DELTA TOUCH SCREEN PANEL DELTA 7” SWITCHGEAR COMPONENTS SIEMENS – SCHNEIDER APPROXIMATE WEIGHT 95 TON

Sąlyga: naudotas, Gamybos metai: 1973, Pressure: 1600 t Column gap: 3160 mm Ram stroke: 1450 mm Hodpfx Abovxwhwsmofr Distance table/blank holder, max. stroke top, upper adj.: 2250 mm Table surface: 4000 x 2200 mm Ram pressure: 1000 t Blank holder pressure: 600 t Blank holder stroke with lower adjustment: 1000 mm Blank holder stroke with adjustment 0–100 mm: 1450 mm Blank holder surface: 4000 x 2200 mm Drawing cushion pressure in table: 360 t Drawing cushion stroke in table: 275 / 400 mm Ram surface: 4000 x 2200 mm Side column passage: 1100 mm Drawing cushion in table: hydraulic, controlled Drawing cushion in ram: hydraulic, controlled Oil capacity: 9000 l Total power requirement: 390 kW Machine weight approx.: 250 t Space required approx.: 6.0 x 4.3 x 10.5 m Head press (1600 tons) of a press line with five follow-on presses (800 tons)

Sąlyga: naudotas, Gamybos metai: 1993, Press force 500 t Upright spacing 2240 mm Stroke 1180 mm Distance table/ram, full stroke up, adjustment up 1800 mm Table size 2050 x 1800 mm Cushion force in table 250 t Cushion stroke in table 380 mm Cushion area in table 1800 x 1200 mm Cushion force in ram 122 t Cushion stroke in ram 200 mm Cushion area in ram 1800 x 1200 mm Ram surface area 2215 x 1800 mm Table height above floor 500 mm Downward speed from 400 mm/s Return speed 10 - 400 mm/s Working speed 10 - 100 mm/s Foundation depth 3.0 m Drive power 122 + 75 + 64.5 kW Weight 110.0 t Required space (W x D x H) 3.6 x 2.2 x 8.5 m Height above floor 6.8 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) with oil-hydraulic drive, hydraulic cushion in table and ram, stroke shock absorption, ram locking Hodpevuk I Nofx Abmjfr Foundation depth approx. 3.0 m Press currently being overhauled with Siemens S7 control system / Pilz safety control A sister machine in 'as is', partially dismantled condition can also be offered

Sąlyga: naudotas, Gamybos metai: 2020, Funkcionalumas: nepatikrintas, bendras aukštis: 6 400 mm, bendras plotis: 4 500 mm, bendras ilgis: 3 800 mm, darbinis greitis: 110 mm/s, atbulinės eigos greitis: 180 mm/s, atstumo lentelė iki stūmoklio: 1 500 mm, We are offering a new build of the machine shown here. The machine was commissioned in 2020 and can be inspected at the customer’s site. Hfjdpfx Aswlrv Usbmsr Technical Specifications: Press Force: 800 T Opening Force: 80 T Motor Power: 55/75 + 55/75 kW Ram Stroke: 1000 mm Rapid Advance Speed: 110 mm/s Working Speed: 6 mm/s Return Speed: 180 mm/s Guide Diameter: 250 mm Maximum Pressure: 250 bar Usable Table Area: 3,500 x 2,000 mm Lower Table Travel: 2,000 mm Between Columns: 2,000 mm Clear Height: 1,500 mm Total Width (Front): 3,800 mm Total Depth (Side): 4,500 mm Overall Height: 6,400 mm Weight: 134,600 kg The MV-800E/NC-SINCRO press has been specifically developed for setting up and testing molds, dies, and punches. The four columns, each with a diameter of 250 mm, are made from C45E steel and designed to withstand heavy-duty use. It is equipped with an optimized hydraulic system operating at up to 250 bar, ensuring long service life and reliability. The system meets all essential health and safety requirements according to CE regulations. STRUCTURE AND TABLE • A structure capable of withstanding 600 T of concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table area: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC UNIT • Two double-acting hydraulic cylinders, each with 400 T capacity. • Single-stage hydraulic unit with automatic shut-off of rapid advance speed and independent operation, equipped with decompression and proportional pressure pre-fill valves. Includes digital potentiometers on the upper table for displacement control, and an electronic synchronization system for compensation of off-center or unbalanced forces. • The press is fitted with a lateral pressure switch for optimal pressure adjustment according to the working requirements. • Glycerine gauge with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electric system for operating the main cylinder feed at one or two speeds. • The press features both a manual and automatic cycle (activated via a test selector switch): • The manual cycle allows all movements of the press to be executed step-by-step at low speed. • The automatic cycle enables the press to complete a full production cycle independently. • Electrical safety system for the upper table fall-arrest device. • Lower table with hydraulic withdrawal and physical stops. • The machine is operated via a control panel with a touchscreen display for entering operating and calibration data. • Two optical safety curtains (1,000 mm) with safety level IV are installed at the front and rear. • Siemens electrical components are manufactured in accordance with current CE regulations and IP55 protection class. • Electrical and hydraulic functions are redundant and self-monitoring. Includes an additional safety block and self-testing devices for both operation and safety. Includes inspection and certification for correct operation and the safety distance of the light barriers. • Safety is additionally ensured by a laser and area protection with safety light curtains, safety level IV.