Diskiniai pjūklai ir frezos

SCM ST1

Sąlyga: naujas, Description Work table made of heavily ribbed cast iron and base frame constructed from welded steel ensure torsional rigidity and vibration-free operation. Unique in this performance class: sliding table made from anodized aluminum for maximum cutting precision. Cutting plane directly at the saw blade. Tilting saw blade from 90° to 45°. Crosscut fence with aluminum length stop and adjustable stop jaw for panels and large workpieces. Cutter guard for profiling tasks. Two independent motors for each working unit. TECHNICAL DATA Dimensions and Weights Net weight approx. 190 kg Extraction Connection Extraction port diameter 120 mm Extraction port diameter saw blade guard 60 mm Electrical Data Connection voltage 400 V Mains frequency 50 Hz Rated operating mode of drive motor S6 Duty cycle drive motor 40 % Power of drive motor 2 x 1.8 kW Sliding Table and Work Table Sliding table length 1,140 mm Sliding table width 201 mm Sliding table height 70 mm Table length 1,040 mm Table width 224 mm Spindle Moulder Spindle shaft diameter 30 mm Usable spindle length 75 mm Spindle speeds 5,000 / 7,500 rpm Max. Cutter Diameter Max. tool diameter 160 mm Max. tool diameter tenoning 200 mm Circular Saw Unit Crosscut length 1,200 mm Cutting width with rip fence 700 mm Max. crosscut width left of the saw blade 1,200 mm Pgodpovwfqwefx Af Njg Saw blade tilt 90 – 45° Max. cutting height 90°: 75 mm Max. cutting height 45°: 60 mm Max. saw blade projection 90°: 67 mm Max. saw blade projection 45°: 40 mm (Main) saw blade diameter 250 mm (Main) saw blade speed 4,000 rpm Equipment Anodized aluminum sliding table Squaring frame with angle-adjustable length stop, one folding stop, and degree scale Saw rip fence Eccentric clamp Table extension Spindle moulder fence with wooden pressure jaws Manual spindle height adjustment Manual saw blade height adjustment Manual saw blade tilt adjustment

Sąlyga: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 64532, used manual hydraulic pipe bending device Available bending formers: 3/8", 3/4", 1 1/4" and 2" Psdodzw Hwspfx Af Nogg Space requirement: 850 x 640 x 780 mm

Sąlyga: naujas, Gamybos metai: 2025, Martin T 54 Surface Planer Only with a high-quality surface planer can you truly achieve perfect foundations. The T54 was designed precisely with this goal in mind. It allows you to joint workpieces easily and accurately at the most modern level, and reliably equip them with precise angled edges. The machine comes standard with a TERSA solid steel cutter block. The Xplane cutter block with shear cut motion is available as an optional feature. Chamfering is effortless, thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The robust cast iron tables of the T54 provide a secure support even for large, heavy workpieces. If you require additional table length, both the infeed and outfeed tables can each be extended by 380 mm—also made of cast iron, of course. Technical Data - Table width: 500 mm - Table length: 2840 mm - Maximum cutting depth: 8 mm - Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 - Speed: 5000 rpm - Motor power: 5.5 kW - Fence adjustable up to 45° - Auxiliary fence for small workpieces - Electric table adjustment Equipment: - T 54 - T 5462-a Suvamatic - T5406/3-a Xplane solid steel cutter block with 3 spiral knife rows (each row with 26 convex carbide knives; 2 counter-knives), delivered including full knife set and a T-wrench Torx T20; spindle speed 6,000 rpm included. - The emission sound pressure level LpA during operation is reduced by 8 dB(A). Pgsdpfx Afepq If Do Nsg Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 1-1, Jaw width: 125 mm Machine weight approx.: 30 t Psdpfx Afecxxl Aj Negg Clamping width: 205 mm

Sąlyga: naudotas, Planer and profiling moulder WEINIG Profimat 26 Super Working width: 20 – 230 mm (260 mm) Working height: 8 – 120 mm (140 mm) 5 working spindles, spindle diameter 40 mm Long infeed table (approx. 2000 mm) Bottom spindle 4 kW / Left & right 7.5 kW / Top 5.5 kW / Bottom finishing 5.5 kW Pneumatic pressure for feed rollers Stepless cardan feed 5 – 24 m/min Feed roller before jointer Control via push button panel Automatic lubrication pump Mechanical digital readouts Machine in CE-compliant version Year of manufacture: 2001 Without machining tools Machine is WORKSHOP OVERHAULED and in GOOD CONDITION Machine is connected and ready for demonstration in the exhibition center Pgedpewqda Nefx Af Neg Ex stock Lieboch

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1974, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 74-4-10, Panel saw ALTENDORF F90, year of manufacture 1974 Machine No.: 74-4-10 Manufacturer: Altendorf, Germany Saw length (mm): 2600 Cutting width (mm): 1300 Max. cutting height (mm): 130 Max. saw blade diameter: 400 mm Main motor: 5.5 kW With scoring unit 4 speed settings Manual saw blade height adjustment Pedpfeipvrbex Af Nogg Approx. weight (kg): 780 Technical data subject to change

Sąlyga: naudotas, Gamybos metai: 1981, Atstumas tarp centrų: 1300 mm Kopijavimo ilgis: 1250 mm Centro aukštis nuo staklių pagrindo: 250 mm Centro aukštis virš atramos: 160 mm Pastumos greitis: 3 m/min Svoris: 630 kg Sukimosi greičiai: 500-1000-1500-3000-2100-4200 aps./min Hidraulinė Sandėliavimo vieta: Nattheimas Pgsdpfx Afsvvkt Is Nog

Sąlyga: naujas, Drilling capacity in steel (diameter): 32 mm Throat depth: 320 mm Drilling stroke: 160 mm Spindle taper: MT 4 Table size: 500 x 420 mm Pedofv H H Hspfx Af Negg Column diameter: 120 mm Speed range: 85 - 1800 rpm Feed rates: 0.1 - 0.2 - 0.3 mm/rev Total power requirement: 0.85 / 1.5 kW Machine weight approx. 500 kg Dimensions (L x W x H): 965 x 515 x 1920 mm High-quality column drilling machine for industrial applications. Suitable for multi-shift operation. - Tapping unit up to max. M20 - Precisely adjustable drilling depth stop - Height-adjustable work table via rack and hand crank - Base plate with T-slots - High concentricity accuracy less than 0.02 mm - Robust, high-performance drive motor - Digital speed display - Automatic feed

Gamybos metai: 2024, Sąlyga: geras (naudotas), Foam Cutting Machine Hyma NSL Manufacturer: Hyma (Denmark) Model: NSL Condition: Nearly new / Like a demonstration machine Year of manufacture: 2024 Machine dimensions: Cutting height: 1300 mm Cutting length: 2470 mm Table left of blade: 2000 mm Table right of blade: 1250 mm Height of side stop: 900 mm Additional equipment according to Hyma = AA: AA6 angle-adjustable side stop 0-90 degrees AA9 more powerful drive motor with 2.2 kW AA11 Electric grinding device with dust extraction (both motorized and friction operation possible) AA7 extra smooth coated table top for template work Standard equipment: Podjx Iwp Espfx Af Negg - Ratchet for serial cuts - Motorized height-adjustable blade guide - 4-rail rolling table system - Safety protective screen The machine is connected and can be demonstrated under power. Machine location: Darmstadt Offered solely due to restructuring. NO SPACE PROBLEMS; NO FORCED SALE! _____ Our general terms and conditions apply. The seller is not liable for typographical or data transmission errors. All details and images were provided and released for publication by the owner. The appearance of the offered items corresponds to their age and the photos shown. The technical condition and wear match the age of the items offered. Used machines are sold exclusively to commercial customers and without warranty.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, frezos veleno ilgis: 150 mm, galia: 11 kW (14,96 AG), ašies skersmuo: 40 mm, bendras svoris: 1 500 kg, Double-sided swiveling spindle support with two robust segment guides, frame constructed in modern steel design, table made of heavy-duty, high-ribbed cast iron, interchangeable milling spindle, three-phase motor for four speeds, electric height and swivel adjustment with rapid and creep feed as well as electronic digital display, incremental switching for height adjustment, milling fence with fine adjustment, metal fence jaws, and replaceable aluminum anti-splinter inserts, extraction ports at the milling fence and below the table, each 120 mm in diameter, minimum extraction speed at the extraction port: 20 m/s, rotatable table insert, interlocked reversing switch for left and right rotation, lockable main switch, cam switch, automatic motor brake. Table size: 1350 x 800 mm Table height: 880 mm Motor power: 11 kW Pgedpfx Aewcpqqjf Neg Spindle taper: MK 5 Speeds: 3000/4500/6000/9000 rpm Swivel range of spindle: -5° to +45° Height adjustment: approx. 145 mm Control: CNC Table extension on both sides, total length 2500 mm, incl. extendable frame support Infinitely variable four-roller feed 2-axis control Milling spindle with 40 mm diameter and 150 mm length