Formatinė pjovimo staklės

SCM SI 450 E

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic adjustment of the scoring unit Automatic parallel fence with adjustment via leadscrew and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system with magnetic strip and LCD display. Cross-cut fence with 3 LCD displays Extendable support table with roller support Technical data: Cutting length mm 3200 Main saw blade diameter mm 450 Scoring blade diameter mm 120 Panel cuts with extendable fence mm 3200x3200 Tilting range degrees 0°/ +46° Max. saw blade cutting height at 90° mm 150 mm Max. saw blade cutting height at +45° mm 130 Saw blade speed rpm 2500, 3500, 5000 Scoring blade speed rpm 9000 Extraction port diameter mm 120 & 100 Main motor power Hz 50 kW 7.5 Scoring unit power Hz 50 kW 0.75 Cutting width with parallel fence mm 1270 Bwjdpjyftzkjfx Ah Ssh Weight approx. 1180 kg Note on used machines: • Errors in technical specifications and prior sale reserved. • The listed prices are ex works, loaded free of charge. • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no warranty whatsoever. Buyers are free to inspect the machines at the location. • Special agreements are only possible in written form. (We will only respond to inquiries providing your address and telephone number!)

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008160, Uždėtos briaunos tipas: plona briauna, stora briauna Klijų sistema: EVA Sujungimo frezavimas: taip Daugiafunkcis agregatas: taip Maks. padavimo greitis: 14 m/min Bwodpfxexqm Iye Ah Ssh Maksimalus plokštės storis: 60 mm Darbo agregatai: 7 vnt.

Sąlyga: naudotas, Gamybos metai: 2005, Carriage length: 3200 mm Cutting width at rip fence: 1300 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 150 mm Scoring unit: Yes Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: electric / position control Saw blade angle display: digital Cutting height display: digital Rip fence display: digital Crosscut fence scale: analog scale Bjdpouix Egjfx Ah Sewh Saw blade diameter: 450 mm Spindle speeds: 3 Motor power: 7.5 kW Motor brake: Yes, automatic Extraction connection: 80 mm and 120 mm Machine length: 3500 mm Machine width: 2200 mm Weight: 1000 kg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, frezos veleno ilgis: 150 mm, galia: 11 kW (14,96 AG), ašies skersmuo: 40 mm, bendras svoris: 1 500 kg, Double-sided swiveling spindle support with two robust segment guides, frame constructed in modern steel design, table made of heavy-duty, high-ribbed cast iron, interchangeable milling spindle, three-phase motor for four speeds, electric height and swivel adjustment with rapid and creep feed as well as electronic digital display, incremental switching for height adjustment, milling fence with fine adjustment, metal fence jaws, and replaceable aluminum anti-splinter inserts, extraction ports at the milling fence and below the table, each 120 mm in diameter, minimum extraction speed at the extraction port: 20 m/s, rotatable table insert, interlocked reversing switch for left and right rotation, lockable main switch, cam switch, automatic motor brake. Table size: 1350 x 800 mm Bwodpfx Ahswcpqqj Sjh Table height: 880 mm Motor power: 11 kW Spindle taper: MK 5 Speeds: 3000/4500/6000/9000 rpm Swivel range of spindle: -5° to +45° Height adjustment: approx. 145 mm Control: CNC Table extension on both sides, total length 2500 mm, incl. extendable frame support Infinitely variable four-roller feed 2-axis control Milling spindle with 40 mm diameter and 150 mm length

Gamybos metai: 2000, Sąlyga: naudotas, Roofers’ ladder lift / sectional lift Böcker ES13B, year of manufacture 2000 with drive motor 1.5 kW Length: 13 metres Payload: 200 kg Bweden Hxz Tspfx Ah Soh Available with or without trailer Immediately available Location: Austria, near Vienna

Sąlyga: naudotas, Gamybos metai: 2014, Drive power: 3 kW Operating pressure: 7 bar Air delivery (flow rate): up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Chicago Pneumatic CPVR15 CE screw compressor – Year of manufacture: 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications—this compressor reliably supplies the compressed air you need. Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Application: workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigerant dryer - OMI ESD 108 - 0.70 kW Bwedpfxoh A Sfde Ah Sjh 1x Beko Öwamat 2 - oil-water separator Technical data taken from publicly available sources.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Spindle tiltable: No Height adjustment: Handwheel Tilting adjustment: - Cutter jaw adjustment: Manual Bedpfx Aogzlpksh Sjwh Height display: Mechanical counter Tilt angle display: - Cutter fence display: Mechanical counter Cutter spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 rpm Motor power: 7 kW Motor brake: Yes, automatic Extraction port: 2 x 120 mm Machine length: 2599 mm Machine depth: 900 mm Weight: 655 kg

Sąlyga: naudotas, Gamybos metai: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS PROCESSING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY SOFTWARE XILOG MAESTRO: EXTREMELY EASY PROGRAMMING "MATIC" WORKTABLE: SINGLE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHORM400 AXES Working area X-axis (reference side): 3,680 mm Working area Y-axis (max. loadable workpiece at rear stops): 1,680 mm Workpiece passage Z / Number of Z axes: 170 mm / 1 Workpiece length for pendulum operation: 1,650 mm Travel speed X-Y axes Pro-Speed: 85 m/min Z-axis speed: 30 m/min Bjdjxnldbspfx Ah Sswh INSTALLATION Installed power: 62–82 KVA Compressed air requirement: 400 NL/min Extraction air requirement: 4,430 m³/h Extraction air velocity: 25 m/s Extraction port diameter: 250 mm GENERAL FEATURES CNC-controlled drilling and milling center in gantry design with worktable and workpiece supports suitable for: - Vertical drilling on panel surfaces - Horizontal drilling on all four workpiece edges - Grooving with disc cutter - General milling operations (3-4-5 axes) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel, reinforced throughout the entire machine bed for extreme rigidity and stability through welded-in reinforcements. The table design with a large base is the key to ensuring permanent precision and stability. The machine layout offers the operator an optimal workflow with a minimal footprint. The moving gantry is built from a solid monoblock and is guided on prism-ground rails with ball-bearing carriages in the X-axis. The mobile unit carries the operating unit, which is also mounted on prism-ground rails and ball-bearing guides. AXIS MOVEMENT All axes move on large-cross-section linear prism guides with wide-bearing ball-bearing shoes to ensure optimal gliding even at the highest speeds and accelerations. The precise and fast positioning of the moving gantry (X-axis) is achieved via rack and pinion with helical teeth. Large-diameter ball screws ensure accurate positioning of the working unit along the moving gantry (Y and Z axes). MOTORS, DRIVES, AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are achieved with high-quality drives and brushless motors, sized for speeds up to 90 m/min, ensuring the best possible surface finish. CONTROL SYSTEM The control unit consists of a numerical controller for milling and drilling with "Xilog Maestro" graphic interface on a Windows 7-based Office operating system: - 17" color LCD screen - QWERTY keyboard - Swiveling operator panel - Machine operation interface with Xilog Maestro software Xilog Maestro Features: Programming - Parametric graphical programming - Import of DXF files (2D; geometries like "SPLINE", "POLYLINE 3D", straight or circular interpolation in three axes, linear in space, spiral in the chosen plane) - Supported programming with graphical and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Option to shift panel zero-point for drilling on slanted or curved panel edges

Sąlyga: naudotas, Gamybos metai: 2011, Numerical WINCUT control Working dimensions mm: 3800 x 3800 Max. blade projection (mm): 107 Front plate loading with 10 clamps on the pusher carriage Side aligner Grading group (maximum blade diameter / power): 160 mm / 1.5 kW Main saw unit (maximum blade diameter / power): 380 mm / 7.5 kW Adjustable saw carriage speed (m/min): 1 - 135 Pusher carriage speed: 70 m/min Three air flotation front tables TECHNICAL DATA TO BE VERIFIED WHEN THE MACHINE IS IN OUR WAREHOUSE Bsdowwrywopfx Ah Sswh

Sąlyga: naudotas, rida: 230 556 km, galia: 368 kW (500,34 AG), pirmoji registracija: 09/2017, kuro tipas: dyzelinas, padangos dydis: 385/65R22.5, ašių konfigūracija: 6x2, ratų bazė: 4 600 mm, kuras: dyzelinas, stabdžiai: variklio stabdymas, spalva: balta, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, pakaba: oras, bendras ilgis: 10 320 mm, bendras aukštis: 3 450 mm, krovimo vietos ilgis: 6 430 mm, Gamybos metai: 2017, Įranga: ABS, AdBlue, autonominis šildytuvas, centrinis užraktas, diferencialo užraktas, eismo juostos palaikymo asistentas, elektrinis langų reguliavimas, kranas, kruizo kontrolė, oro kondicionavimas, priekabos jungtis, sėdynės šildytuvas, trauki kontrolė,