Didelio našumo plokščių pjovimo staklės

SCM Gabbiani G 3

Sąlyga: naudotas, Gamybos metai: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, regularly serviced (last service by Homag in 11/2024) Equipment and technical data: Minimum workpiece thickness: 12 mm Maximum workpiece thickness: 60 mm Minimum workpiece size (L×W): 240 × 55 mm (at 22 mm thickness) / 100 mm (at 60 mm thickness) Minimum edge thickness: 0.3 mm (coil material) / 0.4 mm (strip material) Maximum edge thickness: 3 mm (coil material) / 20 mm (strip material) Feed speed: infinitely variable, 18–25 m/min (frequency controlled) Adhesive type: EVA hot-melt glue Adhesive application (pot / cartridge / nozzle): Melt unit with granulate container Adhesive volume / cartridge size: Granulate container, melting capacity 18–35 kg/h, level controlled Heat-up time: approx. 8–10 min Edge magazine (positions): 2 rolls (automatic roll change) Automatic edge change: yes (automatic via PC22, manual switching possible) Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment End trimming: Kapp unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel/straight) Flush trimming: via pre-milling unit, pneumatically adjustable Radius milling: FK13 contour milling unit, automatic 8-position tool changer (R = 2 mm) Bevel/profile milling: yes, via FK13, pneumatically adjustable Scraper: integrated in multi-finishing unit MN21 Polishing: buffing unit in finishing unit FA11 Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW Workpiece pre-heating: available Release agent spraying device: above / below, Type 2929 (F.01) Extraction ports: several Ø 100 mm (individual extraction for each unit) Control system: power control PC22 (industrial PC, woodCommander on Win XP embedded) Operating voltage: 400 V, 50 / 60 Hz CE / standards: CE compliant according to EC Directive 98/37/EC Kjdpfxjwx Aaqo Af Iewt Dimensions / Space requirement: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system shown in the photos is not included in the scope of delivery! Availability: short notice Location: 63934 Röllbach

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 006211, Max. panel width: 4300 mm Max. panel length: 2200 mm Max. main saw blade projection: 135 mm Number of clamps: 10 Kwjdpfx Afjiwbfuo Iet Second flexible hold-down: yes Rotating station: yes

Sąlyga: naudotas, Gamybos metai: 2019, Numerical control with WINCUT software Barcode label printer Cutting length mm: 4300 Cutting width mm: 4300 Blade projection: 110 mm Double side alignment device with pneumatic rubber cylinder No. 1 Fixed front bakelite table with air curtain system and side guide for loading/unloading panels No. 3 Adjustable front tables made of bakelite with air curtain system for loading and unloading panels Engraving unit (max. blade diameter / power) Main saw blade unit (max. blade diameter / power): 20 HP (15 kW) Optimized blade/pressure beam lift in self-learning mode Electronic setting for the scoring blade Adjustable saw carriage speed m/min: 150 - 170 Pusher carriage speed m/min: 0-90 Pusher carriage with 7 clamps TECHNICAL DETAILS TO BE VERIFIED Kjdowcdymjpfx Af Iowt

Sąlyga: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness with veneer strips (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control/Software: ICOS Open Feed speed (m/min): 10 - 50, without transmission bar (Master & Slave systems) Stop cams retractable, distance (mm): 1080 FORMAT PROCESSING (per side): Protective cutter (pre-milling) 75.186 (1 x kW 4.4) Chipping unit (2 x kW 8) Jointing milling unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): Gluing unit (hot melt adhesive) 283.1513 04.1570 + 283.205 Edge pressure zone – edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 1) 0° - 30° Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servomotors Profile scraper unit 08.519 Kwodpfed Nt Rqex Af Iet Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-4 (4 x kW 0.18) Universal milling unit for grooving/rebating and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Sąlyga: labai geros būklės (naudotas), 3-axis (X-Y-Z) CNC machining center – Cantilever design Movable horizontal plate (workpiece), static machining head Control system (BiesseWorks software), with separate electrical and control panels Machining head safety enclosure, safety tread mats Infeed table (workpiece support) at entry No. 2 workpiece clamping vices positioned within the working area Outfeed table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm 90 x 70 x 8 (approx.) Maximum workpiece dimensions (X-Y-Z) mm 3000 x 1300 x 60 (approx.) Total connected load (kW) 24 WORKING UNITS (TOP): Independent vertical drilling spindles: 29 pcs. Independent horizontal drilling spindles: 10 pcs. (8 X + 2 Y) Grooving saw unit (for X-axis machining), diameter 160 mm (1 pc. x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (1 pc. x approx. 4.5 kW) Kodpfxewb Allo Af Iswt WORKING UNITS (BOTTOM): Independent vertical drilling spindles: 29 pcs. Independent horizontal drilling spindles: 10 pcs. (8 X + 2 Y) Grooving saw unit (for X-axis machining), diameter 160 mm (1 pc. x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (1 pc. x approx. 4.5 kW)

Sąlyga: labai geros būklės (naudotas), Panel dividing saw – horizontal – with rear lifting table Control system: MCS Evolution Kedpfxoq Rfahj Af Iswt Software included Powered roller conveyors (approx. 4500 x 2200 mm) Lifting table (mm): 4300 x 2200 Panel rotating device (for sheets) up to 90° No. 2 rear pushers (1 with grippers) Program pusher dividing No. 10 grippers Max. cutting width (mm): 4300 Useful pusher stroke (mm): 4300 Max. saw blade projection (mm): 135 Max. gripper opening (mm): 133 Scoring saw (max. saw diameter): 20 mm Main saw (max. saw diameter / power): 460 mm / 27 kW Adjustable saw carriage feed (m/min): 0 – 150 No. 4 front air flotation tables Total connected load (kW): approx. 36

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2017, veikimo valandos: 6 205 h, keliamoji galia: 5 000 kg, kėlimo aukštis: 3 925 mm, laisvas kėlimas: 1 210 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 210 mm, šakių ilgis: 2 400 mm, pavaros tipas: Elektro, Electric 4-wheel forklift Load center: 500 mm Mast type: Triplex Ksdpfx Aet Iy Rvsf Ijwt Condition: Refurbished with warranty Technical condition: Very good Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 80V Battery capacity: 840Ah Battery year: 2017 Battery condition: 80 - 100% Description: EXCELLENT CONDITION!!! - COMPLETELY OVERHAULED by LINDE!!! Sideshifter, Fork positioner, 3rd valve, 4th valve, Rear work lights, Front work lights, Heater, Full cabin, CE certificate, Safety light, LED, Container suitable, Dual-pedal control, Integrated charger, Battery with 92% remaining capacity!!!

Sąlyga: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (First machine in a production line) Edge banding material (thickness min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 270 - 1200 Control / Software: SINITRA Feed speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and noise protection cabin Side adjustment of aggregate carrier: manual FORMAT PROCESSING (each side): 2 x Hogger DT 10 (5.8 kW x 2) Space for jointing unit FS Jointing aggregate ES30 + ER30 (5 kW x 2), 0° - 90° Universal milling unit Softforming SF 10 (2 x 2.4 kW), 0° - 45° Spraying device (for liquid non-stick agent) EDGE BANDING SECTION (each side): Edging unit (Hot-melt glue + pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Kwodpfx Afet N Ix Ro Iet Preheating RP 10 Edge pressure zone (CNC controlled) Pressure roller track (revolver) for straight and shaped (softforming) edges Soft PF40 (4 positions), 800 mm (Shears CI10+CS10+RL10) - Edge magazine for coils (no. 6 positions) Milling unit RS 10 (1.3 kW x 2) Milling unit Softforming RF 10 / SF (0.65 kW x 2) Multi-profile milling unit RF 30 (0.65 kW x 2) Universal milling unit for grooving/rabbetting and profiling FB 30 (4.5 kW x 2), 0 - 90° Multi-profile scraper unit RB 30 Flat scraper unit RC 05 / Soft Spray units (for polishing fluid) + buffing unit SZ 30 (0.37 kW x 2)

Sąlyga: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm 0.4 / 3 Edge thickness for solid strips/slats (min/max) mm 0.4 / 8 (12)* Panel thickness (min/max) mm 8 / 60 Control system "StarTouch" + "Touch 7" Feed speed m/min 12-18 Top pressure driven by V-belt (C.N.) Sprayer unit (for liquid anti-adhesive) AAR Adjustable fence, CNC-controlled "EASY SIZE PLUS" Jointing cutter unit 2 x kW Infrared heating for workpiece edge Gluing unit (P.U.R. glue + premelter) "VC/800" - "VC/6" + "AirFusion AF15" Edge pressure zone (CNC-controlled) Edge magazine for rolls - 1 Kedpfx Afjxlqnte Iswt End trimming unit K/SEL Premilling unit RS/K Milling unit RI / 800 (3 positions) Multi-function unit (radius/profile milling) "4 EDGE" KIT Spraying units (for sliding liquid) Profile scraper unit RAS/1000 Flat scraper unit RCA / 2C Universal milling unit for grooving/rebating and profiling K-100 (1 x kW 1.8) 90° Hot air blower - edge finisher Return direction "SAG" Mod. SPINNER 47 / 63

Sąlyga: labai geros būklės (naudotas), Panel dividing saw – horizontal – with rear lift table Control system: MCS Evolution Software Lift table (mm): 4300 x 2200 Number of rear pushers: 2 (1 with grippers) Number of grippers: 8 Kodpfxjq Rffio Af Iowt Max. cutting width (mm): 4200 Useful stroke of pusher (mm): 4200 Max. saw blade projection (mm): 135 Max. gripper opening (mm): 125 Scoring saw (max. saw diameter) (mm): 20 Main saw (max. saw diameter / power) (mm): 460 / 21 kW Adjustable saw carriage feed (m/min): 6 – 150 1 front air flotation table with 90° rotation device (mm): 2100 x 4100 Total connected load (kW): approx. 36