Maitinimo griebtuvas

SCHUNK ROTA NCO 260

Sąlyga: geras (naudotas), Gamybos metai: 1986, 1 used universal cylindrical grinding machine Type: SA 5 /630 Godpfx Aoul Agbobmouk Year of manufacture: 1986 Centre height: 140 mm Swing over bed: 280 mm Centre distance: 630 mm Table speed: 0.05 – 6 m/min Coolant system Weight: 4.5 t Technical data subject to change/errors excepted.

Sąlyga: naudotas, Gamybos metai: 2001, Pressure 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system Total power requirement: 29 kW Machine weight approx. 9.5 t Gedst Hw N Tspfx Abmouk Required floor space approx. ... m Quotation We are pleased to offer you—subject to prior sale and errors in technical data—from our stock: PROFIROLL - BAD DÜBEN (Germany) CNC Thread, Gear and Profile Rolling Machine Model ROLLEX, Year 2001 Steplessly adjustable rolling force from 0.2 to 40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Spindle drive: approx. 8.5 kW each Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features - The machine is equipped with a modern CNC control system developed by the manufacturer. Allows input of all relevant process and workpiece data, enabling fast and straightforward set-up for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. - Built-in (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device, prismatic pre-holders for positioning the workpiece before clamping, and a motorized (driven) tailstock center at the workpiece front. The stroke of the workpiece slide is approx. 500 mm—so the workpiece is clamped and moves hydraulically between the two rolling tools. - Cooling unit for hydraulic oil, separate electrical cabinet, CNC operating panel, etc. - Transparent safety covers in the working area. Central lubrication.

Sąlyga: reikia remonto (naudotas), Funkcionalumas: neveikiantis, CNC tekinimo staklės Gedpfx Ajumlwxsbmjuk

Sąlyga: naudotas, Gamybos metai: 1983, Nominal Pressure: 2,500 t Stroke: 600 mm Cycle Time: 13 - 18 s Upright Distance: 1,720 mm Distance Table/Ram, large stroke top, upper adjustment: 2,600 mm Table Area: 1,720 x 1,800 mm Permissible Continuous Load: 4,000 t Impact Force: 5,000 t Ram Area: 2,100 x 1,320 mm Ejector in Table: 40 t Ejector Stroke in Table: 250 mm Ejector Area in Table: 900 x 820 mm Ejector in Ram: 6 t Ejector Stroke in Ram: 40 mm Spindle Diameter: 425 mm Drive Power: 900.0 kW Weight: 335.0 t Space Requirement (W x D x H): 3.4 x 4.6 x 9.7 m Gsdpowmf Tvjfx Abmeuk Height Above Floor: 8.3 m Fully automated forging line / spindle wedge press with automation for the production of flange shafts Suitable only for hot forming Equipped with a reversible squirrel-cage induction motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for push feed, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, oil circulation lubrication, central grease lubrication Cycle time approx. 13 - 18 s Dismantled and stored - as is, WITHOUT commissioning

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, CNC thread, gear, and profile rolling machine Model ROLLEX 1 Base Frame: The base frame of the thread and profile rolling machine is constructed from welded steel profiles, partially clad with sheet metal. The front section of the base houses the reservoir for process lubricant. Main Drive: The main drive generates the rotational motion required for gear rolling. The drive motor is flange-mounted to the spindle bearing base plate via the Cyclo Drive gearbox. The rotary motion is transferred to the rolling spindle via a Schmidt coupling. The machine operates within a speed range of 0 to 30 rpm, further subdivided into 0 to 20 rpm for continuous operation (S1), and 20 to 30 rpm for intermittent operation (S4). The speed is steplessly adjustable via a frequency inverter. Brand: PROFIROLL Type: ROLLEX 1 Year of manufacture: 2003 Control system: Siemens Sinumerik 840D Motor power (kW): 18 kW Electrical connection: 400 V Rolling range: - Max. rollable workpiece diameter: 40 mm - Rolling slide stroke: 2 x 80 mm - Min. / max. center distance of rolling spindles: 160 / 320 mm - Rolling spindle height above machine bed: 160 mm - Max. tool diameter: 250 mm - Tool holder diameter of rolling spindles: 120 mm - Tool holder length of rolling spindles: 80 mm Force & Drive - Max. rolling force: 100 kN - Rolling spindle speed, stepless: 0-30 rpm Motors - Rolling spindle drive: 2 x 13 Nm - Hydraulics, 50 Hz: 5.5 kW - Process lubrication, 50 Hz: 0.1 kW - Central lubrication, 50 Hz: 0.06 kW Gedpsv Uxq Sefx Abmsuk Temperature range: +5 to +40°C Power supply/frequency: 3-phase, 50 Hz Rated voltage: 400 V Control voltage: 24 V Auxiliary voltage: 24V / 230 V Connected load: 18 kW Rated current (machine): 39 A

Sąlyga: naujas, Gamybos metai: 2025, metrinio sriegio skersmuo (min.): 3 mm, didžiausias metrinės sriegio skersmuo: 16 mm, bendras svoris: 500 kg, padavimo ilgis X ašis: 3 000 mm, padavimo eiga Y ašimi: 1 500 mm, padavimo ilgis Z ašis: 200 mm, sukimo momentas: 24 Nm, veleno greitis (maks.): 3 000 aps./min, veleno greitis (min.): 50 aps./min, galia: 0,005 kW (0,01 AG), The CMA 3-axis controlled thread cutting center is designed, among other things, for the reworking of laser-cut sheet metal parts and complete machining of, for example, small parts and tubes. The machine offers the following processing capabilities: - Thread cutting - Drilling (standard / with chip breaking / hollow profile cycle) - Countersinking - Flow drilling (with optimal feed curve) - Reaming Guedporbz T Njfx Abmsk - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) - Radial compensation of the tool via patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system with light barriers Standard version: Automatic tool changer with 10 positions, mounted on the portal of the machine

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, 1 Internal and Surface Grinding Machine Make: WEMA Glauchau Model: SI 6/2 ALS PC x 710 Year of manufacture: 1985 Grinding depth: 710 mm Gujdpew Dtfbefx Abmek Table travel: 1120 mm Grinding diameter: 40 – 400 mm Weight: 9.1 t

Sąlyga: beveik kaip naujas (parodų įrenginys), The Numturn 500/1500 CNC is a powerful CNC flat bed lathe that stands out for its flexibility and productivity in small-batch production. Featuring a robust, heavily ribbed machine bed and wide, hardened prismatic guideways, it is engineered for heavy-duty machining. The machine is equipped with a high-precision Fagor 8055i CNC controller and an automatic 8-position servo turret, enabling impressive versatility. The hydraulic power chuck and easy-to-operate hydraulic tailstock ensure maximum efficiency. Standard features include automatic central lubrication and a conveniently accessible safety guard, supporting low-maintenance operation. Discover the benefits of the Numturn 500/1500 CNC for your production and secure this robust, precise lathe. Request a quote today! Gjdsm E Ty Njpfx Abmsuk

Sąlyga: naujas, Gamybos metai: 2017, Kitagawa originalus 5 colių, 3 žandikaulių, didelės skylės galios griebtuvas A2-8 tiesioginė verpstės jungtis būklė – naujas, nenaudotas. sandėlyje komplekte 3 minkšti žandikauliai Guedpfxjm E Imzj Abmok tinka verpstei A2-8 nauja kaina – 11 000

Sąlyga: naudotas, Plate width: 3000 mm Plate depth: 5000 mm Plate height: 400 mm Weight: 20 t Godpfxjgrnfge Abmsuk Required space: approx. 5 x 3 x 0.5 m Table length: 5000 mm Table width: 3000 mm Table height: 380 - 400 mm Machine weight: approx. 20,000 kg Required space: approx. 5 x 3 x 0.5 m