Dvigubas vertikalus - alkūninis presas

SCHULER EBS 4-600-3,6-350

Sąlyga: naudotas, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Faceplate diameter: 1650 mm Speed range: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm (with special jaws up to 2050 mm) Clamping diameter in tailstock faceplate: 300 - 1400 mm Max. workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speeds, infinitely variable in 4 steps: 1.5 - 150 rpm Gjdpjxddvnjfx Abdjil Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center cone angle: 70° Slides Travel of grooving slide: 500 mm Travel of plan slide: 1400 mm Rapid traverse long axis: 2000 mm/min Rapid traverse plan axis: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, plan: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Diameter of faceplate (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange center cone angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying attachment for first support - Copying length: 8500 mm - Max. copying depth in one pass: 500 mm Boring attachment - Boring bar: 460 x 390 mm - Boring diameter: 600 - 1000 mm - Max. boring depth in one pass: 2700 mm For Ks of 200 kp/mm² - s max. = 1.5 mm/rev - a = max. chip section 30 mm² with 1000 mm overhang - With increasing boring depth, chip section is reduced One taper turning guide, setting angle up to 8° and max. taper length (in one process) of 2000 mm, setting accuracy ± 5 minutes. One taper turning guide, setting angle up to 15° and max. taper length (in one process) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane at the headstock.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 500 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 610 mm, nominali (akivaizdi) galia: 37 kVA, sukimo momentas: 236 Nm, valdiklių gamintojas: Heidenhain iTNC530, valdiklio modelis: iTNC530, stalo plotis: 700 mm, stalo ilgis: 1 700 mm, stalo apkrova: 700 kg, sukimosi greitis (maks.): 12 000 aps./min, bendras svoris: 9 000 kg, veleno greitis (maks.): 12 000 aps./min, veleno veikimo valandos: 16 580 h, ašies variklio galia: 37 W, ašies skaičius: 1, įrankių magazino lizdų skaičius: 48, Įranga: dokumentacija / vadovas, drožlių transporteris, 3-axis CNC machining center Heidenhain iTNC530 X travel: 1500 mm Gsdpfx Absvz Tyujdeil Y travel: 700 mm Z travel: 610 mm Table size: 1700 x 700 mm Tool holder: SK40 Tool magazine: 48 tools Rapid traverse: 36 m/min Table load capacity: 700 kg Through-spindle coolant: 20 bar Chip conveyor Handwheel

Sąlyga: naudotas, Gamybos metai: 2005, Technical details: Screw diameter: 90 mm Gijdetunccopfx Abdol Shot weight in polystyrene: 1,758 g/PS Clamping force: 6,500 kN Approx. machine weight: 32 t From serial production

Sąlyga: geras (naudotas), Gamybos metai: 2004, Ref. No.: Lg 34522 High-Performance Punch Press HAULICK+ROOS ROS 500 - 1250 used, in good condition Year of manufacture: 2004 (without soundproof enclosure) includes: - Infinitely variable drive Gedpeip Uqmsfx Abdoil - 2-connecting rod drive system - Pneumatic clutch-brake combination - Stroke adjustment - Siemens PC 670 screen control - Recirculating oil lubrication Technical Specifications Maximum pressing force: 500 kN Stroke rate: 30 to 900 strokes/min Stroke: 12 to 60 mm Shut height (max, stroke in B.D.C.): 320 mm Upright opening: 1,250 mm Table area: 1,250 x 730 mm Table pass-through opening: 1,160 x 140 mm Ram area: 1,250 x 450 mm Ram adjustment: 60 mm Drive power: 26 kW Weight: approx. 11,000 kg Dimensions (L x W x H): approx. 2,800 x 1,300 x 3,250 mm Equipment and Accessories: Servo roll feed VAMCO SP 150 Year of manufacture: 2014 Passage width: max. 150 mm Material thickness: max. 3.0 mm

Sąlyga: naudotas, Gamybos metai: 2004, Pressure: 80 t Stroke: 16 - 63 mm Stroke rate: 100 - 750 strokes/min Column gap: 970 mm Installation height (stroke + ram adjustment at top): 380 mm Lateral column opening: 380 mm Table dimensions: 940 x 910 mm Pass-through opening in the table: 770 x 190 mm Gedpfx Ajvuua Nsbdsil Table height above floor: 1180 mm Ram surface: 940 x 510 mm Ram adjustment: 76 mm Material width: 203 mm Material thickness: up to 6.0 mm Feed length: 0 - 120 mm Drive power: 37.0 kW Weight: 14.50 t Space requirement: approx. 2.7 x 1.7 x 3.6 m Approved for automatic operation according to CE standards With infinitely variable three-phase drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, automatic ram adjustment, fixed table, oil circulation lubrication Mechanical roller feed Bruderer BBV 205/120, driven via press main shaft/universal shaft Guethle CK cantilever brackets Optionally, a soundproof enclosure can be offered – price on request.

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2014, veikimo valandos: 24 h, Ich verkaufe eine vollständige, einsatzbereite Zwiebel-Schälanlage mit M&P Zwiebel-Schälmaschinen. Die Ausrüstung umfasst: - 6x M & P Zwiebelschälmaschine - Alle Förderbänder und Elevatoranlagen für den Transport von geschälten, ungeschälten und Abfallprodukten - Inspektionstisch - Alle Arbeitsbühnen - Alle Zuführtrichter für Rohware (ungeschälte Zwiebeln) Gsdpfx Abetzmifedeil Druckluft-Schraubenkompressoren sind nicht enthalten, bei ernsthaften Anfragen kann ich jedoch beim Erwerb von zusätzlichem Equipment unterstützen. Leistung: 2.700–4.500 kg/h geschälte Zwiebeln.

Sąlyga: geras (naudotas), Gamybos metai: 1997, Die Maschine ist in gutem Zustand. Godpfx Abopy Errodoil

Sąlyga: geras (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, Schiess CNC vertikalioji tekinimo staklė su C ašimi, 1992 m., modernizuota 2012 m. CNC NUM 1060 FLEXIUM 2 stalai, stalo skersmuo 2000 mm – maksimalus tekinimo skersmuo 2500 mm – maksimali stalo apsukų sparta 201 aps./min. – stalo galia 56 kW apkrova (įskaitant stalą) 16000 kg judinama skersinė sija, 12 padėčių, žingsnis 50 mm Giedpfexpqm Rjx Abdsl laisva erdvė po veleno nosimi min. 795 mm, maks. 1345 mm RAM Z eiga 1000 mm C ašis – 360000 padėčių; frezavimo galvos sūkių dažnis maks. 1600 aps./min.; frezavimo ašies galia 22 kW; pavarų skaičius – 2 ĮRANKIŲ magazinas: tekinimo įrankiai – 20 padėčių, frezavimo įrankiai – 35 padėtys 1 frezavimo galva WIDAFLEX UTS80 1 frezavimo galva ISO 50 Renishaw kontaktinė zonda (detalėms) MP 60 Įrankių išankstinis nustatymas – Transmit funkcija: G20 / G21 – NĖRA standaus sriegimo SKIEDRŲ KONVEJERIS Priekinės durys: dalinis atidarymas M0 / pilnas atidarymas

Sąlyga: geras (naudotas), Gamybos metai: 2009, padavimo ilgis X ašis: 6 000 mm, padavimo eiga Y ašimi: 3 000 mm, padavimo ilgis Z ašis: 1 500 mm, valdiklio modelis: HAIDENNAIN, ruošinio ilgis (maks.): 6 000 mm, ruošinio plotis (maks.): 2 500 mm, stalo plotis: 6 000 mm, stalo ilgis: 2 500 mm, Gantry milling machine with 5-axis head Giodpfxovcqybo Abdjl

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, bendras svoris: 35 000 kg, spaudimo jėga: 250 t, įvesties srovės tipas: trifazis, galia: 30 kW (40,79 AG), perforavimo jėga: 250 t, įėjimo įtampa: 200 V, Įranga: apsaugos šviesos užtvara, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Gisdpsu Dxb Tsfx Abdel Manufacturer: AIDA Model: NC2-250(1) Press Force: 160 t Year of Manufacture: approx. 1991 Stroke Length: 170 mm Die Height (adjustable): 280–400 mm Table Dimensions: 2700 x 760 mm Ram Dimensions: 2100 x 700 mm Electrical Supply: 3x200V (!!), 30 kW – Japanese standard Net Weight: 35,000 kg Dimensions: 2760 x 2800 x 3980 mm Automatic lubrication system. Automatic cutting oil dosing – RAZIOL EST-02 Optionally available with decoiler and straightening machine.