Lagaminas

Schmitz Cargobull ZKO 18/L

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: Iodpfx Aleh Ek Daersic - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: naudotas, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC control: HEIDENHAIN TNC 155 Serial No. 16186651 Year of manufacture: 1986 Spindle mount: FEHLMANN SF32 Drilling capacity: Ø 30 mm in steel Thread cutting up to M20 in steel Travel paths: X: 850 mm, Y: 435 mm Quill stroke (Z): 210 mm Vertical travel of milling head: 580 mm Feed rate X and Y: 1 to 8000 mm/min Feed rate Z: 1 to 4000 mm/min Rapid traverse X and Y: 8 m/min Rapid traverse Z: 4 m/min Table clamping area: 1570 x 500 mm Distance spindle nose - table: 130 - 720 mm Distance spindle – column: 450 mm Spindle speed: 50 - 7100 rpm, stepless Spindle drive: 10 kW Total connected load: 20 kW Power supply: 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3-axis control: X, Y, and Z quill adjustment - Hydro-mechanical tool clamping FEHLMANN SF32 - Thread cutting device - Cable remote control for machine operation and axis movements - Motorized vertical movement of milling head with cut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with FEHLMANN SF32 holder - 20 tool holders FEHLMANN SF32 - Swiveling tool carrier with 21 tool stations - Coolant system integrated in machine base - Control cabinet fixed to the machine - Documentation: operating manual, control manual, and electrical diagrams Required space (L x W x H): 2350 x 2000 x 2300 mm Weight: 3.2 tons Isdshik Ezopfx Alreic Very good condition

Būklė: naudotas, Gamybos metai: 2008, mašinos/transporto priemonės numeris: VS8750, CANON OCE Variostream 8750 spausdintuvas su Prisma serveriu (nenaudojamas - tai sena versija) Iijdsvu Rimspfx Alrec SRA4 valdiklis; IPDS; TCP/IP Prisma serveris Oce Printer VS 8750 (Prima serveris HP Proliant ML-370-G4. Valdo 2 spausdintuvų rinkinius. 2 duplex = 4 simplex) MRM Standartas (240/300dpi arba 600dpi automatinė raiška) WT4 kryžminio pasukimo modulis Spausdintuvas 1 SN 88.136 Skaitiklis: 576 660 937 - Kūriklio stotis buvo pakeista esant 421 061 210 skaičiuoklei Spausdintuvas 2 SN 88.137 Skaitiklis: 790 048 906 - Kūriklio stotis buvo pakeista esant 638 027 916 skaičiuoklei Spausdintuvų gamybos metai: 2008-09-25 I-konfigūracija (spausdintuvai) C-Twin tipas Viskas veikia. Papildomai: vienas CANON OCE Variostream 8750 – nepilnas, tik dalims. Komplekte: Hunkeler UW6 išvyniojimo įrenginys – S/N: UW6 7183.00835-01/08; metai 2013 Hunkeler RW6 suvyniojimo įrenginys – S/N: RW6 7182.00432-01/31; metai 2013

Būklė: naujas, Pressure: 100 Bending length: 2500 mm Distance between uprights: 2100 mm Installation height: 365 mm Stroke length (max.): 180 mm Throat depth: 300 mm Dimensions (LxWxH): 3760 x 2150 x 2450 mm Weight approx.: 6500 kg Motor power: 5.5 kW Standard equipment: KK-Industries GmbH has participated in production and now manufactures press brakes and guillotine shears under their own specifications. We have assembled a high-quality model for the European market. The CNC press brake KK Kletzer Europa Compact, made in Bursa, Turkey Model KK Kletzer Europa Compact The robust entry-level press brake KK Kletzer Europa Compact is characterized by its high precision, accuracy, and versatile applications. We focus on quality, which is also reflected in the control system. As standard control, we use the high-quality Italian controllers (2D 10) with the simplest programming. Furthermore, the KK Kletzer Europa Compact press brake is equipped with Y1, Y2, and X CNC axes via the controller. There are no compromises in punch and die quality, either; the CNC press brake KK Kletzer Europa Compact is fitted with quality tooling from EUROSTAMP Italy or Rolleri Italy. Of course, a machine is only as good as the service behind it. That is why we emphasize highly qualified staff with long-term experience in the CNC sheet metal processing sector. CNC axes Y1, Y2, X 2D 10 control unit Backgauge with double linear guide and ball screw Centrally adjustable crowning device 2 heavy-duty front support arms with height adjustment on linear guide Laser safety device on the upper beam CE protective equipment Iiedpfx Aled Iy Tvorsc Options: CNC R-axis EUR 5,231.00 CNC Crowning EUR 4,658.00 Distributed by: KK-Industries GmbH Tel.: 0043 (0)664 380 7776 Something for everyone!

Būklė: naudotas, tuščias svoris: 5 100 kg, didžiausias leistinas svoris: 12 900 kg, bendras svoris: 18 000 kg, ašių konfigūracija: 2 ašys, pirmoji registracija: 12/1998, krovimo vietos ilgis: 7 000 mm, krovinių skyriaus plotis: 2 470 mm, krovos erdvės aukštis: 1 mm, bendras ilgis: 2 550 mm, bendras plotis: 1 600 mm, pakaba: plienas, padangos dydis: 235/75R17.5, ratų bazė: 5 400 mm, spalva: oranžinė, rida: 1 001 km, pavaros tipas: kitas, vairuotojo kabina: kitas, Įranga: ABS,

Būklė: naujas, Bernardo Motorized Guillotine Shear MTA 2060 x 3 mm NCC Cutting length: 2060 mm Max. sheet thickness*: 3 mm Cutting angle: 1° 30‘ Strokes/min: 31 Iisdpfx Ajd Hxnhelrec Working height: 810 mm Backgauge: 0 – 750 mm Table width: 390 mm Motor power: 4.0 kW Width: 2600 mm Depth: 2100 mm Height: 1260 mm Weight: approx. 1710 kg * Material strength: 400 N/mm² Features - Equipped as standard with sheet support device, ideal for thin sheets - Front support arms for easy handling of large panels - Motorized backgauge, precise positioning via ball screw spindles - Clearly arranged control panel with integrated control unit - Robust steel sheet construction for vibration-free operation - Support table with right-angle stops on both sides - High safety for the operator thanks to protective cover and light barriers on the rear of the machine - Double-edged cutting blades made of quality steel ensure clean, burr-free cuts - Automatic hold-down device for sheet fixation Scope of delivery - Cutting line illumination - Motorized NC backgauge - Front sheet supports - Side stops - Protective cover with light barriers - NC control BRL 401.2 - Pneumatic sheet support device - Foot pedal with emergency stop - Blades made of tool steel

Būklė: naudotas, Centrifugal Pump, Water Pump - Nameplate: unfortunately not available - Flow rate: 20-50 m³/h - Max. head: 14-9 mWC - Motor power: 1.85 kW - Speed: 2825 rpm Iisdpsciq Dlofx Alrjc - Pipe connection inlet: DN65 - Pipe connection outlet: DN40 - Dimensions: 540/290/H310 mm - Weight: 49 kg

Būklė: naudotas, Gamybos metai: 1987, Grinding length: 520 mm Grinding width: 160 mm Workpiece height: 300 mm Electromagnetic chuck: WxD=520x160 mm Wheel diameter: 230 mm Iisdscxxy Uspfx Alrec Year of manufacture: 1987 Machine weight approx.: 1.5 t Required space approx.: LxWxH 1.5x1.8x1.6 m - Universal surface grinding machine with rapid vertical feed - Hydraulic table drive - External control cabinet with oil cooling for improved dimensional accuracy - Accessories: Coolant system

Gamybos metai: 1988, būklė: naudotas, • Maximum working length (mm): 3100 • Maximum profile height (mm): 200 Iedpfx Aokx Hpaolreic

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: F34.TEVP02, bendras svoris: 1 823 kg, kuro tipas: dyzelinas, bakelio talpa: 450 l, spalva: raudona, galia: 48 kW (65,26 AG), išėjimo įtampa: 400 V, išėjimo dažnis: 50 Hz, išėjimo srovės tipas: trifazis, nominali galia: 48 kW (65,26 AG), nominali (akivaizdi) galia: 60 kVA, nuolatinė galia: 48 kW (65,26 AG), nepertraukiama (akivaizdi) galia: 60 kVA, bendras ilgis: 2 660 mm, bendras plotis: 1 110 mm, bendras aukštis: 1 770 mm, sukimosi greitis (maks.): 1 500 aps./min, variklių gamintojas: Yanmar, aušinimo tipas: vanduo, kombinuota degalų sąnauda: 13,9 l/100 km, kuro sąnaudos (mieste): 7,2 l/100 km, kuro sąnaudos (užmiestyje): 9,8 l/100 km, kuras: dyzelinas, kuro bako talpa: 450 l, baterijos talpa: 100 Ah, akumuliatoriaus įtampa: 12 V, įėjimo įtampa: 12 V, įėjimo dažnis: 50 Hz, įėjimo srovė: 32 A, darbinė temperatūra: 25 °C, aplinkos temperatūra (min.): −25 °C, aplinkos temperatūra (maks.): 45 °C, valdymo spintos aukštis: 1 770 mm, valdymo spintos ilgis: 2 660 mm, valdymo spintos plotis: 1 110 mm, triukšmo lygis: 62 dB, apsaugos tipas (IP kodas): IP65, sukimosi greitis (min.): 1 500 aps./min, temperatūra: 25 °C, įvesties srovės tipas: trifazis, garantijos trukmė: 12 mėnesiai, Įranga: dokumentacija / vadovas, mobilioji dyzelino kuro talpa, The Bredenoord 37 kVA generator is a reliable and versatile solution for both temporary and long-term power requirements in a wide range of environments. This generator set is ideal for mobile applications and complies with Stage 3A emission standards. Equipped with an efficient Yanmar engine paired with a Stamford alternator, it delivers outstanding performance with low operational costs. The generator comes in a sound-insulated enclosure, ensuring minimal noise emissions—perfect for use in noise-sensitive environments (super silent). The housing features thick, oil-resistant acoustic insulation and external power outlets with circuit breakers for enhanced safety. With a 100-litre fuel tank, the generator offers an autonomy of up to 48 hours under continuous operation. The system supports diesel, HVO, and GTL fuels, providing flexible fueling options. Technical Specifications: - Model: Bredenoord 37 KVA - Nominal output: 37 kVA - Maximum output: 37 kVA - Engine: Yanmar 4TNV981IGEHR - Alternator: Stamford brushless (AVR) - Output: 37 kVA - Voltage: 230/400 V, 50 Hz - Speed: 1500 rpm - Noise level: 66 dB(A) at 7 metres - Fuel tank: 100 litres - Autonomy: Iedpfowd Sfmex Alrsic - 100% PRP: 40 hours - 70% PRP: 56 hours - Engine power: 27 kW - Battery charger and engine pre-heater: Standard - Control panel: Comap MRS16 (auto start/stop) - Dimensions (L x W x H): 2.10 m x 0.98 m x 1.35 m - Weight: 905 kg - Emission class: Stage 3A Fuel Consumption: - 100% PRP: 7.6 L/h - 70% PRP: 5.37 L/h - 50% PRP: 4.05 L/h Options: - Engine pre-heater - Battery charger - 3-way fuel valve - XXL fuel tank Sound Attenuation: The generator is engineered with optimised air inlets and specialised insulation materials to minimise noise. The acoustic insulation is reinforced with wool of varying thicknesses to reduce sound across a broad frequency spectrum, making it ideal for use in noise-sensitive areas. Durability: The enclosure is corrosion-resistant due to a coating tested for over 2,000 hours (C5I-H), ensuring long service life even in the most demanding conditions. Safety: The generator is equipped with reinforced locks and stainless steel hinges. Doors are designed with a 20-degree bevel to prevent water accumulation and minimise oxidation risk. Transport and Handling: The generator is easy to move, thanks to reinforced lifting eyes and steel skids, ensuring straightforward transportation on construction sites. The design provides stable and secure relocation of the generator without risk of damage. Customer-Specific Adaptations: The Bredenoord 37 kVA generator is available in different configurations, ranging from 20 kVA to 600 kVA. Customer-specific modifications are possible, allowing the generator to be tailored to particular requirements and applications. Certifications: - CE certified - European manufacture Applications: This generator is suitable for various sectors, including construction, industry, and other applications where reliable and efficient power supply is essential.