Rankinis presas

SCHMIDT 5

Būklė: naudotas, tuščias svoris: 3 320 kg, didžiausias leistinas svoris: 14 680 kg, bendras svoris: 18 000 kg, ašių konfigūracija: 2 ašys, pirmoji registracija: 08/1991, pakaba: plienas, padangos dydis: 245/70R17,5, spalva: juodas, rida: 1 001 km, pavaros tipas: kitas, vairuotojo kabina: kitas, Įranga: ABS,

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Overhauled: 2024 Year of manufacture: 1994–2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed: 0 – 40 mm/s, continuously adjustable Cut length: 5–950 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After the retrofit, the machine is in a like-new condition, both technically and visually. Thanks to its equipment and construction, the machine can be used very efficiently for a wide range of applications. The programmed HMI control ensures simple and highly profitable operation of the system. The soundproof cabin minimizes noise emissions. The machine is fully overhauled in-house according to customer requirements. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components Psdjuiy Hrepfx Al Iogr - Overhaul and/or replacement of all pneumatic cylinders - Renewal of valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine is equipped with: - Soundproof cabin - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feed of up to 6 m long bar stock - Roller conveyors for bar stock - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your personnel

Būklė: naudotas, Gamybos metai: 1986,

Būklė: naudotas, rida: 38 538 km, galia: 120 kW (163,15 AG), pirmoji registracija: 01/2013, bendras svoris: 12 100 kg, kuro tipas: dyzelinas, spalva: balta, ašių konfigūracija: 4x2, tuščias svoris: 6 500 kg, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: Euro 5, pakaba: plienas, krovinio erdvės tūris: 5 m³, Gamybos metai: 2013, veikimo valandos: 8 260 h, Įranga: hidraulika, oro kondicionavimas, papildomi žibintai,

Gamybos metai: 1962, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 1083, Broaching Machine – Vertical Pgjdpofc T Eujfx Al Ior Manufacturer: Rausch Model: RS10/915 Machine No.: 1083 Year of manufacture: 1962 Pulling force: 10 tonnes Stroke: 915 mm System: DIN 1415 With platform for above-floor installation

Būklė: paruoštas naudoti (naudotas), Pressing force: 1600 kN, throat depth: 450 mm, installation height: 560 mm, ram stroke: 8–160 mm, control system: SCHMERSAL SEPG 05.3.2.0.22/95, weight: 16.2 t, including documentation. Pgedohz Ua Sjpfx Al Ier

Būklė: naujas, Pressione: 1,5 kN Corsa: 40 mm Sbalzo: 70 mm Altezza di lavoro: da 75 a 170 mm Superficie del tavolo: 115 x 70 mm Peso macchina: ca. 11 kg Dimensioni (L x P x A): 115 x 175 x 290 mm Pressa manuale a cremagliera HZ 150 La trasmissione della forza avviene tramite una struttura a cremagliera. È impiegata dove, durante il processo di lavoro, è richiesto un carico costante. Costruzione precisa, mandrino temprato e rettificato, durata illimitata Lunga guida mandrino, prestazioni di pressione ottimali, Pgjdjfv Av Dopfx Al Isr Cava a T fresata centralmente secondo DIN 650, dadi scanalati perfettamente adattati.

Būklė: naujas, Gamybos metai: 2025, Laser power: 6,000 watts Round tube: 20 - 350 mm Square tube: 20 x 20 - 350 x 350 mm Rectangular tube: 20 x 20 - 350 x 350 mm Max. positioning accuracy X, Y-axis: 0.05/1000 mm Max. positioning accuracy U-axis: 0.05/1000 mm Max. mild steel: 14 mm Max. stainless steel: 10 mm Max. aluminium: 10 mm Max. tube weight: 1,200 kg Length: 17,296 mm Width: 4,271 mm Height: 2,933 mm Standard Equipment Working area – tube diameter Round tube: 20 mm – 350 mm Square tube: 20 – 350 mm Rectangular tube: 20 x 20 mm – 350 x 350 mm Minimum clamping tube thickness: ≥1 mm Y-axis travel: 9,100 mm Z-axis travel: 4,000 mm X-axis travel: 400 mm Max. loading length: 9,200 mm Max. unloading length: 6,000 mm Pgedpjxgc Arsfx Al Isr X, Y-axis positioning accuracy: ±0.05 mm/1000 mm X, Y-axis repeat positioning accuracy: ±0.05 mm/1000 mm Max. positioning speed of rotary U-axis: 100 RPM Max. acceleration X/Y-axis: 1.0 G X-axis rapid traverse: ≤50 m/min Max. loading capacity per tube: ≤133 kg/m Machine operating temperature: 20°C – 40°C

Būklė: reikia remonto (naudotas), Gamybos metai: 2024, Completely overhauled: 2024 PLC control: Siemens S7 Saw blade diameter: 60 – 250 mm Motor power: 1.5 kW Saw blade feed: 0-20 mm/min Cutting speed: 15 - 170 m/min (steel) 630 – 1885 m/min (non-ferrous metals) Max. working area: 70x40 mm (steel) Max. working area: 60x40 mm (non-ferrous metals) Round material working range: 5 - 70 mm (steel) Round material working range: 5 - 50 mm (non-ferrous metals) Feed length: 5 - 500 mm 5-9999 mm (multiple stroke) Max. feed rate: 500 mm/sec Weight (saw) approx.: 610 kg Dimensions LxWxH (saw) approx.: 2500 mm x 1000 mm x 2000 mm The machine will be completely overhauled in our facility according to customer requirements. Among others, the following components will be renewed: - Conversion to Siemens S7 PLC control - Upgrade to Siemens HMI operator panel - Replacement of pneumatic feed and ball screw - Replacement of servomotor and servo drive - Replacement of frequency converter for main saw drive - New electronic components - New pneumatic lines - Servicing/replacement of all pneumatic cylinders and valve terminals - Optimization of extraction system - Servicing of central and minimal lubrication systems - Replacement of general wear parts - Overhaul of machine bed The machine is additionally equipped with: - Minimal lubrication for superior cutting quality Thanks to its features and design, the machine is suitable for high-volume cutting of steel within close tolerances. Warranty: Unless otherwise agreed, we offer a 6-month warranty on all parts overhauled or replaced by us. Labor and wear parts are excluded from the warranty. Options: - Conversion of the sawing unit to a direct-drive main drive for processing non-ferrous metals and plastics (speed: 1000 – 3000 rpm) - 1000 mm feed unit - 2000 mm feed unit - 4 m inclined magazine - 6 m inclined magazine Podpfouiy I Aox Al Iogr - Servo-controlled material feed - Servo-controlled saw feed - Conversion to prism jaws (60°) for high-volume clamping of round materials - Discharge system - Delivery and installation at your facility - Training for your staff

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Hello, I am offering for sale a renowned brand CNC LATHE – GILDEMEISTER CTX 400 V3 with driven tools and C axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control: HEIDENHAIN 3190 + TURN PLUS overlay Country of origin: Germany Pgsdpetpuh Asfx Al Isr Year of manufacture: 2000 _ Machine specifications: - Turret: 12 tool stations with VDI 30 holders (every second station driven) - Max spindle speed: 5000 rpm - Max turning length (Z axis): 640 mm - Max turning diameter (X axis): 290 mm - C axis - Driven tools - Spindle chuck: BERG KH 200 - Max bar diameter: 65 mm – finished part catcher - Coolant system - Hydraulic tailstock - Chip conveyor - Spindle drive power: 21 kW - Technical documentation (DTR) - Machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES FROM PPM? - We have our own stationary and mobile service team - We have already sold over 700 DMG machines - Possibility of commissioning the machine at the customer's site - Operator training and machine delivery to the customer included in the price - All our machines undergo a professional technical inspection – fully ready to work - Machine purchase is possible via installment plan or leasing.