Lėkštės keltuvas, vakuuminis keltuvas, vakuuminis siurbtukas

Schmalz Vacumaster VM-Multi-150-90

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2000, bendras svoris: 1 000 kg, bendras aukštis: 3 500 mm, keliamoji galia: 2 500 kg, gerklės gylis: 5 000 mm, darbinio aukščio: 3 000 mm, Sertifikuota DGUV iki: 06/2025, Įranga: dokumentacija / vadovas, Column and Wall-Mounted Slewing Cranes TAUCHA / DEMAG / LIFTKET – 50 kg to 2,500 kg – Electric Chain Hoists – Multiple Systems Available For sale are several column and wall-mounted slewing crane systems from the manufacturers Mechanik Taucha Fördertechnik GmbH, Demag, and Liftket. The cranes feature load capacities ranging from approx. 50 kg to 2,500 kg and are suitable for use in workshops, production sites, assembly areas, as well as in internal material handling and logistics. Some systems are designed as classic column slewing cranes with single arms, while certain units are configured as double-arm column slewing cranes and can therefore serve two work areas at the same time. Credoyt Hc Depfx Akkef The cranes are equipped with electric chain hoists and trolleys, and are operated via pendant controller units. Each system can be purchased individually. Inspection available by appointment. Taucha Column Slewing Crane – Load Capacity 2,500 kg Heavy-duty column-mounted slewing crane with floor-mounted steel column and jib arm for industrial lifting and assembly operations. Taucha Column Slewing Crane – Load Capacity 2,000 kg Column slewing crane with pivoting jib for material handling in production and assembly environments. Taucha Column Slewing Crane – Load Capacity 1,600 kg Industrial crane with column installation and slewing jib, suitable for medium to heavy loads. Taucha Column Slewing Crane – Load Capacity 1,250 kg Column crane with jib arm and trolley for precise material movement. Taucha Column Slewing Crane – Load Capacity 1,000 kg Column crane with electric chain hoist and pivoting jib for assembly areas. Taucha / Liftket Column Slewing Crane – Load Capacity 1,000 kg Column crane with Liftket electric chain hoist, suitable for industrial lifting applications. Taucha Column Slewing Crane – Load Capacity 800 kg Column slewing crane with jib arm and trolley for workshop and production facilities. Taucha Column Slewing Crane – Load Capacity 800 kg (Double Jib) Column slewing crane with two opposite jib arms, suitable for servicing two workstations. Taucha / Liftket Column Slewing Crane – Load Capacity 500 kg Column crane with electric chain hoist for lighter lifting applications. Liftket Column Slewing Crane – Load Capacity 500 kg Column crane with Liftket chain hoist and pivoting jib. Demag Wall-Mounted Slewing Crane – Load Capacity approx. 315 kg Wall-mounted slewing crane with Demag electric chain hoist, suitable for workplaces with limited space. Taucha Column Slewing Crane – Load Capacity 250 kg Compact column slewing crane for light loads. Taucha Column Slewing Crane CS KD 250-6 – Load Capacity 250 kg Column slewing crane with pivoting jib and electric chain hoist. Liftket Column Slewing Crane – Load Capacity 250 kg Column crane with Liftket electric chain hoist for assembly operations. Taucha Column Slewing Crane – Load Capacity 200 kg Column crane for light material handling. Taucha Column Slewing Crane – Load Capacity 125 kg Light-duty column slewing crane for small components and tools. Taucha Column Slewing Crane – Load Capacity 100 kg Compact workshop crane for light-duty applications. Taucha Column Slewing Crane – Load Capacity 50 kg Very light-duty slewing crane for minor lifting tasks.

Būklė: naudotas, Gamybos metai: 1999, Outreach 290 mm Codsw En D Ujpfx Akkorf Drilling stroke 160 mm Total power requirement 1.9 kW Description to follow!

Būklė: naujas, Gamybos metai: 2026, Completamente automatisk skjæring av mellomstore til store aluminiumprofiler med brukervennlig automasjon. Legg ned hvilken som helst aluminiumprofil — maskinen vil automatisk oppdage og skjære den i henhold til jobblistene med høy-presisjon servomotor for nøyaktig materialposisjonering. Excel-jobblister kan importeres via WIFI for effektiv og enkel håndtering av store skjærelister. For hver aluminiumprofil du legger ned for skjæring, uansett lengde, måler en lasersensor profilens lengde. En kraftig optimaliseringsalgoritme kalkulerer i sanntid den beste skjærerekkefølgen for å minimere svinn. Maskinen skjærer automatisk henhold til den optimerte listen uten stopp. Du trenger ikke gjøre noen innstillinger – bare fortsett å legge inn nye aluminiumstokker. Et raskt og enkelt alternativ til dobbelthodede gjærsager. Tast inn (eller importer) ønskede lengder og vinkler, og trykk START. Maskinen produserer kontinuerlig vinkelskårne deler, raskt og nøyaktig. • Fullautomatisk skjæredrift med stangmating og tilpassing av lengde • Enkelt brukergrensesnitt for automatisk drift – legg inn jobb og start skjæring på sekunder • Forenklet del-, batch- eller store Excel-jobblister for skjæring • Bundlet/flerstang-skjæring og telling • Fjerninnlasting av Excel-jobblister via WIFI med avansert datamapping • Fullt justerbar kutte- og fremføringshastighet for maksimal produktivitet • Automatisk optimaliseringsmodus med laserbasert lengdemåling og kuttoptimalisering for minimalt svinn (opsjon) • Automatisk etikettutskrift for deler med data fra jobbliste (manuell påføring, opsjon) • Direkte materialmerking inline uten operatørinngrep (opsjon) • Strekkode- eller QR-kodeutskrift/skanning for jobbinntasting (opsjon) Crjdpfx Aof Ekn Dokkef • Automatisk servo-posisjonering av sagvinkel opp til ±75° (opsjon) Særlig godt egnet for: • Produksjon av vinduer og dører • Produksjon av profilerte aluminiumskonstruksjoner i gjæringsvinkel • Produksjon av aluminiumskonstruksjoner • Komposittprodukter • Produksjon av persienner, solskjerming og møbler • Salg av aluminium til detaljmarkedet Modell: A550 Lengde: 6 m Lineærenhet: ProfiStop Alpha Materiallengde: 4680 mm Skyvekapasitet: 20 – 40 kg Programvare: Optimiser KVALITETSMASKINER PRODUSERT I AUSTRALIA.

Gamybos metai: 2016, veikimo valandos: 10 900 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įrenginys yra labai geros būklės ir visiškai veikiantis. Mums jo nebereikia, todėl parduodame. Reguliariai prižiūrėtas. Išmontavimas ir pakrovimas į sunkvežimį įskaičiuoti į kainą. Papildoma informacija: 4 ašių profilių apdirbimo centras Sukurtas lankstiam ir efektyviam aliuminio apdirbimui Autonominis spaustuvų pozicionavimas Maks. darbo ilgis: 7 600 mm 8 pneumatiniai spaustuvai Įrankių keitiklis 8 įrankiams Veleno darbo laikas: 5100 val. Codpfx Aowwtyljkkorf Papildomos techninės specifikacijos – pagal užklausą.

Būklė: naujas, Vacuum Lifter BARBARIC B3, pivotable, incl. crane - Demonstration unit - Included: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg capacity Vertical and horizontal handling of flat, standard commercial boards (laminated boards, natural wood boards) up to a board size of 3,000 x 2,100 mm - Tilting range of 90° with pneumatic tilt mechanism - Complete version with hoist and appropriate safety devices (vacuum gauge and hand-operated slide valve with mechanical lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable beam (beam length: 1,500 mm) Included: - Option: reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg Crodpfju R Szasx Akkjf with 2 oval suction pads, 500 x 250 mm, on an adjustable beam (beam length: 1,250 mm) and reinforced vacuum pump for porous materials. The reinforced version enables lifting of materials up to 250 kg. Included: - Option: BARBARIC uniWood comfort control All controls for the hoist and the vacuum lifter are combined in a single control unit—our special handling grip. This allows single-handed operation of the system and the load. The lifting process can be continuously regulated via frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum gauge and two-button safety control for load release). Included: - BARBARIC column-mounted slewing crane Load capacity at hoisting device: 250 kg The specified capacity refers to the effective load at the hoist. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consisting of column, console, and low-friction jib arm. Manual slewing and trolley travel. A suitable reinforced concrete floor (C20/R5, min. 20 cm) is required for installation. The static assessment of the floor must be provided and documented by the client. For installation on cracked concrete or ground with low load-bearing capacity, larger base plates are available upon request. Mounting: supplied with adhesive anchors for concrete floor. If ordered without hoist, please specify the desired cable or hose arrangement! Delivery includes: trolley, power supply, and compressed air connection. - New exhibition machine -

Būklė: naujas, Gamybos metai: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min/Max. workpiece thickness: 8 - 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Whispercut jointing unit Crodpfsg Tu Rkex Akkef Corner rounding unit, radius R = 2 mm Quick-change device for corner rounding unit Radius changeover motor EF R = 1 mm Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Edge protection spray Nesting Pneumatic 3-point adjustment Multi-function cutter (R2/R1/chamfer) Equipment for short workpieces

Gamybos metai: 2007, veikimo valandos: 4 100 h, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Šio įrenginio mūsų gamyboje daugiau nereikia, todėl jis parduodamas. Nuo 2007 metų įrenginys priklauso mums ir yra reguliariai prižiūrimas. Viskas veikia tinkamai. Išmontavimas ir pakrovimas į sunkvežimį įskaičiuoti į kainą. Papildoma informacija: 5 ašių profilių apdirbimo centras Sukurtas lanksčiam ir efektyviam aliuminio apdirbimui Codpfx Aowwtw Dekkjrf Autonominis spaustuvų pozicionavimas Maksimalus darbinis ilgis: 9 300 mm 12 pneumatinių spaustuvų Įrankių žurnalas talpina 20 įrankių ir 500 mm pjūklo diską Veleno darbo valandos: 4100 h Papildomos techninės specifikacijos pateikiamos pagal užklausą.

Būklė: naudotas, Double-Head Cutting-Off Machine – FOM ALVA 450 B Professional double-head saw for cutting aluminum profiles, PVC, and light alloys, ideal for window and door manufacturing. Year: 2002 Widia-tipped blades Ø 450 mm Three-phase motors 3 HP (2.208 kW) – 2800 rpm – 230/400V – 50 Hz Direct drive transmission from motor to widia blade Blade shaft diameter: Ø 32 mm Head tilting: 90°   45° outward   22.5° outward   Intermediate angles with mechanical stop and reading on graduated vernier First head fixed Second head mobile: automatic positioning with option for manual adjustment Positioning speed (automatic) of mobile head: 12 m/min Positioning accuracy of mobile head: +/- 0.1 mm Minimum cutting capacity between heads: 300 mm (can be reduced with custom program) Maximum cutting capacity between heads: 4000 mm Hydropneumatic feed for widia blades (adjustable advancing speed – rapid return) Separate electrical and pneumatic control panels Dual pressure operation servo-controlled at low pressure Air consumption per work cycle: 28 standard liters Vertical and horizontal pneumatic clamps Spray mist lubrication for cutting Prepared for chip and fume extraction (1) Operating pressure: 7 bar (adjustable) Roller conveyor for mobile head (3 meters) Cedpfx Aeyylikskkerf Machine in working condition.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Overhauled: 2024 Year of manufacture: 1994–2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed: 0 – 40 mm/s, continuously adjustable Cut length: 5–950 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After the retrofit, the machine is in a like-new condition, both technically and visually. Thanks to its equipment and construction, the machine can be used very efficiently for a wide range of applications. The programmed HMI control ensures simple and highly profitable operation of the system. The soundproof cabin minimizes noise emissions. The machine is fully overhauled in-house according to customer requirements. Among others, the following components are renewed: Cedpfx Asuiy Hrekksrf - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul and/or replacement of all pneumatic cylinders - Renewal of valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine is equipped with: - Soundproof cabin - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feed of up to 6 m long bar stock - Roller conveyors for bar stock - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your personnel

Būklė: naujas, Gamybos metai: 2026, Construction size: 5 Nominal heat output: 145 kW -- Compliant with BImSchV Stage 2 and CE certification -- Cedpodlhcrofx Akkerf Combustion chamber fully lined with fireclay For spaces up to: 3,800 m³ (according to DIN standard) Fuel types: Firewood, chipboard, wood chips, briquetted wood chips Fuel consumption: 35 - 40 kg/h Blower air output (free-blowing): 9,400 m³/h Outlet opening: Ø 700 mm Flue pipe connection: Ø 220 mm Weight: 1,950 kg PLC control cabinet: 380 Volt