Tinklelio suvirintojas

Schlatter MG24

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, darbinis plotis: 2 450 mm, Overhauled Schlatter MG903 - PG24 - Longitudinal wire loader LFE - Longitudinal wire feed LV - MG24.4 mesh welding machine - Cross wire feeder QF8 - Mesh pull-out MVL4.2 - Mesh stacker MS12 - Control and power cabinet – Siemens S7 TIA machine control Mesh width: 2450 mm Fodpfxsv Ed Ans Acuopn Wire: 2–12 mm

Sąlyga: visiškai atnaujintas (naudotas), SCHLATTER MG24 Welded Mesh Production Line Completely Refurbished WORKING RANGE Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 distributor: min. 300 – 1,600 mm Maximum spacing between outer warp wires: 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Minimum spacing between warp wires: 100 mm Spacing between weft wires: 25 – 250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24 MG 24.1/8C MESH WELDING MACHINE, Standard Equipment Includes: - 1 Machine base frame - 1 Upper support for press reception, continuously adjustable via handwheel - 1 Magnet holders with holding magnets and monitoring of weft wires - 1 Row of pneumatic solenoid valves for press actuation - 1 Air and water system - 2 Pneumatic rotary drives with oil damping - Static torque with 5 bar compressed air: 480 Nm - Continuously adjustable front from 25 – 250 mm, adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION Includes: - 8 C-type transformers - Rated power per transformer: 100 kVA Fpodpfewu Tu Dox Acuon - Secondary open-circuit voltage: 7.1 V - Secondary rated current: 14 kA - 8 ES 130 thyristor contactors - 12 Welding presses: 5.0 kN - 12 Warp wire current bridges for 50–100 mm warp wire spacing - 12 Warp wire current bridges for 100 mm stepped warp wire spacing - 10 Warp wire current bridges for 100–150 mm warp wire spacing - 8 Warp wire current bridges for 150 mm stepped warp wire spacing - 6 Warp wire current bridges for 150–200 mm warp wire spacing - 6 Warp wire current bridges for 200 mm stepped warp wire spacing - 24 Lower copper electrode holders with standard angular electrodes, each with a water-cooled current cable, width: 58 mm - 24 Wire holding clamps Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 – 1,600 mm Spacing between extreme warp wires: max. 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Spacing between warp wires: min. 100 mm Weft wire spacing: 25–250 mm Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24