Plokštelinės gręžimo staklės - atraminė įvorė

SCHIESS FB 160

Būklė: naudotas, Gamybos metai: 1999, X travel: 12,000 mm Y travel: 3,600 mm Z travel: 1,500 mm Kedpexwdygsfx Aaujdk Spindle speeds: 3,000 rpm Control system: Heidenhain iTNC430 Milling head: 2 axes, indexed in 2.5° increments Vertical (Y axis): 3,600 mm Cross (Z axis): 1,500 mm Longitudinal (X axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7:231:3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse X axis: 12,000 mm/min Z/Y axis: 15,000 mm/min Feed motor torque X axis: 55 Nm Z axis: 37 Nm Y axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to the machine: 300 L/min at 4.5 bar NOTE: Clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Būklė: naujas, Pressure: 600 T Bending length: 6,050 mm Ksdpfxjd Ehh Rj Aauodk Frame gap: 5,100 mm Installation height: 680 mm Stroke length (max): 455 mm Throat depth: 450 mm Dimensions (LxWxH): 7,100 x 3,275 x 3,910 mm Approx. weight: 50,200 kg 4 axes (Y1, Y2, X, R): Yes, all axes operated via Esa S630 (2D graphical control) CNC crowning via control: yes, via Esa S630 (2D graphical control) Motor power: 45 kW Standard equipment: KK Kletzer Europa We have assembled a high-quality model for the European market. The CNC press brake KK-Industries made in Turkey. Model KK Kletzer EUROPA XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy, and versatile application possibilities. The Europa XL offers a very large installation height, resulting in a long stroke (cylinder travel). The throat depth is also above average to minimize any restrictions during operation. Our focus is on quality, which is reflected in the control system as well. As standard, we offer the high-grade Esa S640 (2D graphical control). Furthermore, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R, all controlled by the system. Naturally, CNC crowning via Esa S640 (2D graphical control) is also included. Regarding the upper tool and die, we make no compromises and equip the KKI EUROPA XL CNC press brake with quality tooling from EUROSTAMP Italy. Of course, a machine is only as good as its after-sales service. For this reason, we focus on highly qualified personnel with many years of experience in CNC sheet metal processing. CNC axes: Y1, Y2, X, and R axis Esa S640 (2D graphical control) Backgauge with dual linear guide and ballscrew drive Motorized crowning system with CNC control Heavy-duty adjustable stop with handwheel, from 175 t heavy-duty version with linear guide Laser safety device on upper beam CE safety equipment Various options available Other controls available: ESA 640 2D 15'' touchscreen control ..... ¤ 4,520.00 ESA 675 W 3D 21'' touchscreen control (Windows-based) ..... ¤ 6,485.00 DELEM 66 T 2D 17'' touchscreen control (Windows-based) ..... ¤ 10,165.00 DELEM 69 T 3D 17'' touchscreen control (Windows-based) ..... ¤ 16,350.00 KK-Industries GmbH There’s something for everyone!

Būklė: geras (naudotas), Manufacturer: Ursviken Model: VPF 1000/800-5.0 Control: Siemens SIMATIC Panel Year of Manufacture: 1970 Hydraulic press suitable for the fabrication of large components such as dished heads, tanks, boilers, shipbuilding, and steel construction applications. Refurbished in 2015 with Siemens SIMATIC panel and Rittal E-Cabinet. Installed height: 2,950 mm Maximum die height: 1,500 mm Movable table and ram in X-direction Comprehensive die package with radii: 10/20/30/50/60/80/100 Pressing force: 210 kg/cm² Maximum stroke: 800 mm Machine pit depth: 2,350 mm Specifications Metric / US Standard Capacity: 1,000 tons Distance between uprights: 5,010 mm Table length: 3,000 mm Table width: 2,000 mm Table height: 550 mm Kjdpfx Aaskvmi Seuodk Ram stroke: 1,450 mm Approach speed: 50 mm/min Working speed: 5 mm/min Return speed: 50 mm/min Dimensions (Estimated) Length: 0 mm Width: 0 mm Height: 0 mm Weight: 0 kg Please Note: The information on this page has been compiled to the best of our knowledge and, where possible, sourced from the manufacturer. The details are provided in good faith, however, accuracy cannot be guaranteed. Accordingly, no assertions or contractual terms are implied. We recommend verifying all critical details independently.

Būklė: geras (naudotas), Gamybos metai: 2013, Ref.-No.: 10636 Manufacturer: TOS VARNSDORF Model: WHN 13 CNC Year of manufacture: 2013 Control type: CNC Control system: Heidenhain 530 Location: Halberstadt Kdodpfx Asyqmvxeauek Country of origin: Czech Republic X-travel: 3,500 mm Y-travel: 2,000 mm Z-travel: 1,250 mm W-axis: 800 mm B-axis: 360° Table load: 15,000 kg Tool holder: SK 50 Speed: 1,400 rpm Spindle speed: 2,000 rpm Additional information: - The control system was retrofitted in 2013 to a HEIDENHAIN 530i. - All drives have been updated to digital. The turret thrust bearing was also replaced in 2013. - Accessories: - 3D probe – Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled) - 1 new axis module installed in the machine - Spare parts still in original packaging, machine covers - All bearings have been replaced in recent years. - Tools and milling cutter heads are included. Single-owner machine. The machine is still powered up and in production. Inspection possible by prior arrangement.

Būklė: naudotas, Gamybos metai: 1973, Spindle diameter: 130 mm X travel: 3000 mm Kodpfx Aaot Hwt Seuodk Y travel: 2000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal: 3000 mm Y – Spindle head vertical: 2000 mm Z – Spindle stroke: 1000 mm Table plate (lower): 3300 x 2400 mm Load capacity per m²: 10 t/m² Built-up table approx.: xx,000 mm Min./Max. position of work spindle above table: 770 / 2770 mm Feed: 0.9 – 2000 mm/min Rapid traverse for spindle head and column: 5000 mm Quill feed: 0.5–1200 mm/min Speed range, partially infinitely variable: 4.5 – 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: - Heidenhain 3-axis digital readout, hardened guideways, ball screws - Infinitely variable spindle speeds and feeds, separately motor-driven feeds - Travelling operator platform, pendant control panel, hand-held remote, platform - Hydrostatic guideway in column traverse - Clamp plate 3,200 x 2,500 mm planed, with T-slots; add-on table approx. 1400 x 2600 x 900 mm high, one side face machined - Hydraulic clamping for column/carriage, motorized tool clamping - Extensive accessories, particularly tool holders with and without tools Separate chip extraction unit, clamping aids, 1 clamping angle plate and plates, and much more

Būklė: naudotas, Veleno skersmuo 130 mm X eiga 3500 mm Y eiga 2500 mm Z ašis 1250 mm W ašis (išilginis veleno judėjimas) 800 mm Laikiklis ISO 50 P.D.B Stalas 1800x2500 mm Kdodpfx Aaeyqvqrouek Stalo apkrova 12 t Dažnis 3000 Hertz Įtampa 400 V Bendra galia 37 kW ATC 40 pozicijų Saugos uždanga Aušinimo skystis Techniniai duomenys pateikti gamintojo arba operatoriaus, todėl mums yra neįpareigojantys. Tarpinis pardavimas pasiliekamas; galioja tik mūsų bendrosios pardavimo sąlygos. Apie mus daugiau nei 400 nuosavų mašinų sandėlyje daugiau nei 15 000 m² sandėliavimo plotas, kranų pajėgumas 70 t daugiau nei 10 000 priedų jūsų dirbtuvėms Jei norite parduoti įrangą, gamybos linijas ar savo įmonę, susisiekite su mumis. Daugiau pasiūlymų rasite mūsų tinklalapyje. Apžiūros galimos susitarus iš anksto. Laukiame jūsų apsilankymo. Jūsų Markus Hirsch komanda

Būklė: naudotas, Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Valdymas NCT104 (Pagaminta Vengrijoje) Stalo matmenys: 1800 x 1800 mm X eiga: 3500 mm Y eiga: 1200 mm Z eiga: 1500 mm Kedpsyvuh Iofx Aauodk W eiga: 570 mm Veleno skersmuo: D130 mm Stalas sukasi iš CNC programos Tvirtinimas: SK50 Svoris: 32 000 kg Matmenys (ilgis x plotis x aukštis): 6700 x 6000 x 4420 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 50166, X ašies eiga: 9 000 mm, Y ašies eiga: 2 295 mm, Z ašies eigos atstumas: 2 500 mm, greitas poslinkis X ašimi: 9 m/min, greitas poslinkis Y ašis: 1 m/min, greitasis eiga Z ašyje: 2 m/min, X ašies padavimo greitis: 3 m/min, Y ašies padavimo greitis: 1 m/min, padavimo greitis Z ašis: 2 m/min, veleno greitis (maks.): 710 aps./min, veleno greitis (min.): 15 aps./min, sukimosi greitis (maks.): 710 aps./min, bendras plotis: 8 500 mm, bendras aukštis: 7 150 mm, bendras ilgis: 20 720 mm, stalo ilgis: 9 000 mm, stalo plotis: 2 000 mm, sukimo momentas: 6 500 Nm, tarpas tarp stulpų: 2 750 mm, paskutinio kapitalinio remonto metai: 2003, stalo aukštis: 1 000 mm, stalo apkrova: 45 000 kg, ašies variklio galia: 50 000 W, ruošinio svoris (maks.): 45 000 kg, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, GENERAL MACHINE CHARACTERISTICS The machine is characterized by a fixed gantry and a movable table. The gantry is fitted with a height-adjustable crossbeam, which can be equipped with one or two vertical spindle heads in the VFS 160 configuration. Additionally, the gantry can accommodate one or two side-mounted (horizontal) spindle heads VFS 160. The aforementioned types of spindle heads can be fitted with up to four additional spindle attachments. The clamping area consists of two interconnected clamping tables, which can also be used individually when disconnected (only one table operational at a time). Clamping Table Dimensions of one table: ..... 2,000 x 4,000 mm Total length of interconnected tables: ..... 9,000 mm Kdsdjxpudtepfx Aausk Clamping surface of joined tables: ..... 8,500 mm Clamping T-slots (width x pitch x number): ..... 36 mm x 180 mm x 11 slots Table working height from base: ..... 1,000 mm Load capacity per 1 m of table length: ..... 5,000 kg Table travel: ..... 4,250 mm (9,000 mm for joined tables) Working feed rate of table: ..... 15 – 3,000 mm/min Rapid traverse: ..... 9,000 mm/min Gantry with Height-Adjustable Crossbeam Clear opening between uprights: ..... 2,750 mm Crossbeam vertical adjustment: ..... 2,295 mm Crossbeam travel: ..... 750 mm/min Vertical Spindle Head VFS 160 Spindle taper: ..... ISO 60 Spindle drive power: ..... 50 kW Speed range: ..... 15 – 710 rpm Working feed: ..... 10 – 2,000 mm/min Rapid traverse: ..... 2,000 mm/min Distance from spindle face to clamping table: ..... 425 – 2,720 mm Horizontal Spindle Head VFS 160 Spindle taper: ..... ISO 60 Spindle drive power: ..... 50 kW Speed range: ..... 15 – 710 rpm Working feed: ..... 5 – 1,000 mm/min Rapid traverse: ..... 1,000 mm/min Distance from spindle face to center T-slot of table: 377 – 1,177 mm Overall machine dimensions (L x W x H): 20,720 mm x 8,500 mm x 7,150 mm Additional Spindle Heads: NVS Head (Extension Attachment) Spindle taper: ..... ISO 60 Speed: ..... 15 – 710 rpm Max. transmitted power from 60 rpm: ..... 40 kW Max. torque: ..... 6,500 Nm HFUS Head (Universal Milling Head) Spindle taper: ..... ISO 60 Speed: ..... 15 – 710 rpm Max. transmitted power from 80 rpm: ..... 22 kW Max. torque: ..... 2,700 Nm Swiveling capability, vertical axis: ..... 360° Swiveling capability, horizontal axis: ..... 360° Quill adjustment: ..... 50 mm HFOS Head (Double-sided – Right Angle Milling Head) Spindle taper: ..... ISO 60 Speed: ..... 15 – 710 rpm Max. transmitted power from 60 rpm: ..... 40 kW Max. torque: ..... 6,500 Nm Swiveling capability ...

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 5 000 mm, Y ašies eiga: 2 500 mm, Z ašies eigos atstumas: 2 500 mm, stalo apkrova: 20 000 kg, ašies skersmuo: 130 mm, veleno greitis (min.): 3 000 aps./min, veleno greitis (maks.): 3 500 aps./min, stalo ilgis: 2 500 mm, stalo plotis: 2 500 mm, W ašies eiga: 800 mm, ruošinio svoris (maks.): 20 000 kg, gręžimo veleno ilgis: 800 mm, frezos galvos padėtis: 2.5 x 2.5º, CNC nuobiramoji JUARISTI TX3 - S TECHNINĖS CHARAKTERISTIKOS Markė: Juaristi Modelis: TX3-S CNC valdymo sistema: Heidenhain iTNC 530 X ašis: 6000 mm Y ašis: 2500 mm Z ašis: 2500 mm W ašis: 800 mm Strypo skersmuo: 130 mm Didžiausias greitis: 3000 aps./min. Įrankių sandėlis: 60 pozicijų Kūgis: ISO 50 Automatinė frezavimo galvutė: 2,5 x 2,5 mm Dalinė pasukama stalo galvutė: 360 000° Stalo keliamoji galia: 20 t Drožlių pašalinimo sistema Vidinis aušinimas Ksdpfxoyckq Do Aauodk KAINA IR PAPILDOMA INFORMACIJA – KLAUSKITE (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, APDIRBIMAS, PINACHO, MORISEIKI, FREZAVIMO STAKLĖS, TEKINIMO STAKLĖS, ŠLIFAVIMO STAKLĖS, NUOBIRAMOSIOS STAKLĖS, PRESAS, LAZERIU PJOVIMAS, GILJOTINA, LANKSTYMO STAKLĖS)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, CNC T TIPO GRĘŽIMO STAKLĖS CASTEL RED X eiga: 4000 mm Y eiga: 2000 mm Kjdpfxox U Dfye Aauodk Z eiga (griebtuvas): 700 mm W eiga (kolona): 2500 mm Sukamoji stalas: 1800 x 1600 mm (hidrostatinis) Stalo indeksavimas: 0,001° Stalo apkrovos talpa: 12 t CNC valdymas: SELCA1200