Stūmoklinė dozavimo sistema

Scheugenpflug Dos P016

Sąlyga: labai geros būklės (naudotas), Scheugenpflug DOS P016 Piston Dispenser Piston Metering System DOS P for a wide range of applications Scheugenpflug piston metering systems operate based on the principle of volumetric dosing. This means the dispensed material quantity is mechanically determined by the geometry and stroke of the corresponding cylinders. Filling of the cylinder with potting material is performed by the relevant material supply unit. When processing a two-component medium, the volume of both cylinders simultaneously establishes the mixing ratio between the resin and hardener components. The metering pistons push the two components in separate channels simultaneously towards the outlet valve, where they are only mixed into a homogeneous reactive medium in the static mixing tube. The DOS P016 / 050 / 100 / 300 / TCA piston metering systems are highly precise volumetric dispensing systems designed for processing 1K and 2K materials, covering a broad range of requirements. Precisely dimensioned metering cylinders enable reproducible material volumes to be dispensed. For 2K materials, the parallel discharge of both cylinders into the shared mixing tube ensures a consistently constant mixing ratio and maximum process reliability. At the same time, it is possible to gently convey pressure-, moisture-, or shear-sensitive potting materials without fear of altering the material. Users also benefit from easy and rapid maintenance, long service life, and significantly reduced maintenance costs. With optional features such as valve monitoring, mixing tube heating, or metering head heating, these systems can be flexibly adapted to specific requirements. Your benefits - Dosing accuracy is not affected by temperature, pressure, or viscosity - Constant mixing ratio at all times via parallel discharge of the metering cylinders - Wide range of applications (material- and process-related) Key features - Simultaneous discharge of cylinders by a common lift mechanism ensures homogeneous mixing ratio - Sensor-based monitoring of inlet and outlet valves as well as cylinder filling - Material temperature control via mixing tube heating (optional) - Dosing needle monitoring via camera (optional) Product data General Materials: 1K and 2K Viscosity: From low- to high-viscosity Fillers: Filled and/or abrasive media Operating principle: Volumetric dosing Characteristics - Constant mixing ratio for 2K - Independent of temperature, material feed pressure, and casting resin viscosity - Precisely reproducible and highly accurate results - Maximum process reliability Applications Potting, sealing, bonding, thermal interface material application, sealing, encapsulation (glob top) DOS P016 Gkjdpfx Acjrazznjuec Max. volume/shot 2K at 1:1 ratio 1K: 0.06/17 ml 2K: 0.1/32 ml Max. dosing speed [ml/s]: 2 Dosing accuracy at max. stroke [%]: < 0.5 Heatable up to max. [°C]: 80 Outlets: 1K: 1-4, 6, 8 2K: 1-4 Weight: 14 kg Dimensions (W x H x D) 290 x 350 x 230 mm Discover more dispensers – new and used – in our shop! International shipping costs on request!