Plokštės pjūklas su automatiniu pakrovimu

SCHELLING FH4-430/580

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Machining center Manufacturer: Weeke Model: BHX 500 Year of manufacture: 2008 Working range X: 2,500 mm Working range Y: 1,300 mm Working range Z: 4 - 80 mm Number of routing units: 2 Number of drilling units: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Grooving saw: Swivels 90° X-axis speed: 130 m/min Y-axis speed: 80 m/min Z1-axis speed: 50 m/min Z2-axis speed: 27 m/min Spindle speed: 18,000 rpm Gbodpfx Aoh E Sghjn Hsu Dismantled - available immediately

Gamybos metai: 1996, būklė: visiškai atnaujintas (naudotas), Used Hosokawa Alpine Zirkoplex ZPS 315 Classifier Mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Gsdpskqlf Sofx An Hebu Exclusively uses original components Original manufacturer’s warranty Guaranteed supply of spare parts from the manufacturer Reduced delivery time Prior to delivery, the machine is inspected, all wear parts are checked and replaced if necessary, and the machine can be customized to your specific requirements Possibility of supplying all required peripherals or adapting to your existing production plant We are also interested in buying back unused HOSOKAWA ALPINE equipment The Hosokawa Alpine Zirkoplex ZPS classifier impact mill is ideal for the fine grinding of various dry materials, offering precise control of cut point or maximum particle size, thanks to its integrated classifier wheel design. It can be used to micronize a wide range of products across different industries where fine particle size reduction is required, such as the mineral, chemical, food, and pharmaceutical industries. Grinding occurs in the lower section of the mill, where a rotating plate equipped with grinding tools (hammers or pins) impacts and propels the material against the internal grinding track (liner) for size reduction. Within the same chamber, the airflow carries fine particles to the classifier wheel, where oversized grains are rejected and returned for further grinding, while the fines pass through for subsequent processing, typically filtration. Due to the necessary process air, a minimal temperature increase during grinding is to be expected compared to other granulation technologies. The final particle size distribution can easily be adjusted by modifying parameters such as the rotor speed, classifier wheel speed, air volume, feed rate, etc. Construction material: Stainless steel for product-contact parts No wear protection Not equipped with explosion protection (NPSR), not ATEX Scope of supply: Hosokawa Alpine ZPS 315 mill with motors, one set of internal grinding tools, and installation base

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, mašinos/transporto priemonės numeris: 0-241-06-5232, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 12 608 h, pjovimo aukštis (maks.): 125 mm, pjovimo plotis (maks.): 2 200 mm, pjovimo ilgis (maks.): 4 300 mm, Plokščių pjūklas Holzma HKL11/43/22 Maks. pjovimo plotis: 4300 mm Maks. pjovimo ilgis: 2200 mm Godpfsxfvp Ajx An Hebu Maks. pjovimo aukštis: 125 mm Pjūklas yra nuolatinėje eksploatacijoje, tad galima apžiūra darbo metu. Įrenginys bus prieinamas nuo 2026-03-02.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, mašinos/transporto priemonės numeris: A3347169, Funkcionalumas: visiškai funkcionalus, ašių skaičius: 3, CNC staklė SCM, Record 100 AL action line, 3 ašių medienos apdirbimo linija, 400V, pagaminimo metai 2008-07-16, elektros spinta, valdymas apsaugos kilimėliu, pertvara, darbastalis 305 x 122 cm, bendri matmenys: apie 565 x 250 x 260 cm, savarankiškas išardymas 3 ašys Puikiai veikianti 1 didelis vakuumas su balta plokšte ir 1 mažas vakuumas: Metai 2019 / N°A3347169 Tipas VTLF2.250/0-79 Dažnis 50/50Hz Greitis 950/1150min-1 Reikalinga galia 5,5/6,4kW Godsxg El Aspfx An Hsbu Įsiurbimo našumas 244/286m³/h Maksimalus vakuumas 200/200mbar Yra vaizdo įrašas.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, Kantavimo staklės BIESSE Akron 1440A Prieinamumas: 2026 m. balandis/gegužė Gjdpfx Ajyh A I Ajn Hsbu CE sertifikatas Gamybos metai: 2017 Galima apžiūrėti įrenginį prieš perkant

Būklė: naudotas, mašinos/transporto priemonės numeris: 005108, Pozicija 1: Plokštelinė pjovimo staklės – padavimas iš priekio HOLZMA-HPP 380/43/43 + TLF Pozicija 2: Horizontalus sandėlis HOLZMA-HPP 380/43/43 + TLF Gjdpfxjwuck Is An Hjbu

Gamybos metai: 2003, būklė: paruoštas naudoti (naudotas), Galima Gildemeister CNC dvigubos galvutės tekinimo staklė su Y ašimi. Strypo pralaida: 32 mm, įrankių vietos: 2x12, pagrindinio ir priešpriešinio veleno greitis: 8000 aps./min, valdymas: Siemens Sinumerik 840D Powerline, darbo valandos: 39 426 h, veleno valandos: 25 529 h. Komplekte yra KSS sistema, įrankiai ir trumpų strypų padavimo įrenginys 1500 mm Iemca Vip 80E. Yra dokumentacija. Galima apžiūra vietoje. Tikimasi, kad bus prieinama nuo 2026 m. balandžio pabaigos. Gbodpfjygw Svox An Hsu

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, galia: 9 kW (12,24 AG), pjovimo aukštis (maks.): 82 mm, pjūklo disko skersmuo: 315 mm, sukimosi greitis (maks.): 4 400 aps./min, bendras ilgis: 3 300 mm, bendras plotis: 3 350 mm, bendras svoris: 3 000 kg, pjovimo ilgis (maks.): 3 300 mm, X ašies padavimo greitis: 100 m/min, padavimo greitis Z ašis: 150 m/min, pjūklo disko greitis: 4 400 aps./min, pjūklo pavara: 9 000 W, Įranga: sūkių greitis be galo kintamas, SCHEER PA 4500 – 3300 x 3350 S7WIN10 Year of manufacture: 2025 | Condition: NEW | Control system: PA-WIN10 + SIMATIC S7 | High-performance panel dividing saw for maximum precision & efficiency The SCHEER PA 4500 is a robust, industry-proven panel saw designed for the precise processing of both coated and uncoated wood-based panels. Engineered for demanding applications, even the basic configuration meets all requirements of a modern cutting operation. Main technical data: Cutting length (max.): 3300 mm Cutting height (infinitely variable): up to 82 mm Main saw blade: Ø 315 mm | 60 teeth | Cutting width 3.2 mm Scoring saw blade: Ø 200 mm | conical | Cutting width 3.2–4.0 mm Saw motor: 9.0 kW Scorer motor: 1.1 kW Saw carriage drive: 2.32 kW Gbjdpfx Answrpcxo Hju Main saw blade speed: approx. 4400 rpm Saw carriage feed: 0–100 m/min (infinitely variable) Saw carriage return: 150 m/min (lowered) Electrical connection: 400V / 50Hz / 3Ph Pneumatics: 6 bar, 15 NL/cycle Dust extraction: 3 x 140 mm | Capacity: 3300 m³/h at 20 m/s Working height: approx. 930 mm Angle stop: left Machine design & key features: Heavy-duty cast honeycomb structure for vibration damping Absolute encoders for highly accurate positioning (no referencing required) Saw carriage optimized for travel distance and cycle time Automatic oil mist lubrication & guideway cleaning Program-controlled adjustment of blade height & scorer position ProLock quick-change system for saw blade replacement "Tested for wood dust" – emissions only 0.65 mg/m³ Machine equipment: 1x Angle pressure unit WP 8500-1400 Adjustment range: 0–2200 mm Pressing force: approx. 480 N Cycle-controlled retraction function for panel transport 1x Material feed table HP 5130 – 33 x 33 Rear-mounted with hardened guides & rack-and-pinion drive Roller conveyor system for effortless panel transport 6 clamping fingers (spacing: 70 / 262 / 454 / 838 / 1173 / 2630 mm) Servo drive with ±0.1 mm accuracy 1x Angle stop table HP 5137-1-1465 1x Workpiece support table HP 5135-1-1465 Pertinax surface, each 1465 x 800 mm 1x Air cushion system LK 5169 Central radial fan, max. pressure 2800 N/m² 1x Control cabinet dustproof, separately mounted, vibration-protected 19" TFT flat screen, keyboard, trackball Control & software: SIMATIC WinLC RTX soft PLC with S7 functionality PA-WIN10 operating interface on Windows 10 Professional (64-bit) (upgrade to latest Windows version possible at any time) True-to-scale real-time simulation and graphical cutting plan editor Integrated interfaces (label printing, panel storage management, etc.) Network-capable, future-proof, modularly expandable Operating modes & control: Manual: single, chain dimension, trim and remnant cutting Automatic: cutting plan processing, online order management Editor: parts list-based planning & optimization Maintenance & diagnostics: blade measurement, single axis control, and more 📞 Contact us for a customized quote or to arrange a viewing. Delivery, installation, commissioning, and training available on request.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2013, Used machine Year of manufacture: 2013 Features and technical data: - Machine has been completely overhauled: - new Glue Jet 301 gluing system (upper part 1 mm) - all units checked - all cutters sharpened - all knives replaced - Feed speed: 10 - 18 m/min - Workpiece length: min. 160 mm - Workpiece width: min. 60 mm - Workpiece thickness: 8 - 60 mm - Edge thickness: 0.4 - 8 mm - Electrical equipment for stepless feed: 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode - Infeed fence 1350 mm, motorized adjustment - Jointing milling unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm, with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2, left rotation for jointing milling unit - Diamond cutter, Ø 70 x 64 x 30 mm, Z2, right rotation for jointing milling unit - Edge feed 1901 fully automatic - Glue application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - Granulate hopper - Pressure unit 1913 MOT - End trim unit 1918 (60 mm) pneumatic - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation Gsdpfx Aozlbpzen Hjbu - Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right rotation with CM technology - Scraper unit 1929 MOT2: - Carbide reversible knives for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Location: 63934 Röllbach

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 - in solid strip mm max 1 Panel thickness (min/max) mm 14 / 60 (LASER - Max 50) Control ICOS Open Feed speed m/min (adjustable) 6 - 30 Top pressure driven by V-belt Gedpoi Hn Srofx An Hobu Spray unit (for liquid release agent) Adjustable stop ruler CNC controlled Panel infeed system Jointing milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments no.) 36 + 12 End trimming unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0° - 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 30 (0.5 kW x 1) max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)