Lagaminas

Scania P 280 + trailer - 2 X SLIDE OUT / CAMPER / WOHN...

Sąlyga: naudotas, rida: 1 015 000 km, Gamybos metai: 2005, Purpose: Goods transport Serial number: YV3R9G1296A10xxxx Please contact ATS Norway for further information. Please quote reference number upon request: 20949 Specifications: - Model year: 2005 - Not EU-approved - Mileage: approx. 1,015,000 km - 420 hp - 3 axles - Tyres (see photos) - Summer tyres included - Right rear light removed - Reversing camera - Paintwork has started to peel - Automatic transmission - Air conditioning - Radio - Self-parking wiper fault - Air in the washers - Available immediately Description: 2005 Volvo 9700H bus with 54 seats, comes with summer and winter tyres. The bus is currently fitted with winter tyres; the owner states the summer tyres are in excellent condition. Nedpfxjwx D Tre Aghowp There is a fault in the self-parking wipers. The bus will be cleaned inside prior to sale. Available immediately. Km: 1,015,000 HP: 420 TÜV: No EU-approved until: 25.06.2021 Own weight: 15,290 kg Total weight: 24,750 kg Payload: 9,385 kg Width: 255 cm Length: 1,450 cm Euro: 3 Model: 9700H bus with 54 seats, summer and winter tyres Transmission: Automatic Number of seats: 54

Sąlyga: naudotas, rida: 7 000 km, galia: 48 kW (65,26 AG), kuro tipas: dyzelinas, pavaros tipas: automatinis, pirmoji registracija: 12/1999, spalva: oranžinė, Įranga: visų varančiųjų ratų pavara, Multicar winter service MULTICAR SELF-PROPELLED WORK MACHINE, STREET CLEANER The vehicle does not have a roadworthy certificate (TÜV) due to use on private property Nsdpfx Agjvhzd Ushswp We have not tested the vehicle for full functionality Engine and transmission run well

Gamybos metai: 1980, Sąlyga: naudotas, Table length: 2000 mm Table width: 1800 mm Table load capacity: 12.5 t Total power requirement: 10 kW Machine weight approx.: 7.5 t Space requirement approx.: [missing value] m Table size approx.: 2,000 x 1,800 mm Maximum table load approx.: 12,500 kg Table travel (longitudinal): 1,250 mm Table height above floor: 920 mm Longitudinal feed: 0.63 - 2,000 mm/min Rotational feed (reference diameter 1000 mm): 1 - 3,150 mm/min Rapid traverse (longitudinal): 2,000 mm/min Rapid traverse (rotational, reference diameter 1000 mm): 3,150 mm/min Machine weight: 7,500 kg External dimensions L x W x H: 3,700 x 2,100 x 920 mm Total drive power: 10 kW – 380 V – 50 Hz Accessories / Special equipment: • Steel telescopic covers for the guideways • Infinitely variable table feed • Optical display for setting and reading the longitudinal adjustment Nwjdet Hwq Repfx Aghep • Optical device for angle setting and angle reading Condition: Satisfactory to good – ready for demonstration Delivery: Ex stock – as inspected Payment: strictly net – payable upon receipt of invoice We kindly ask you to review our offer. Please always inquire about your requirements for good used machines with us.

Sąlyga: naudotas, galia: 59 kW (80,22 AG), Įranga: visų varančiųjų ratų pavara,

Sąlyga: naujas, Gamybos metai: 2025, Dimensions: 1.6 - 3.7 m Rotation: 0 - 45° Lateral tilt: 0 - 8° Blade angle: 0° Barrier overhang: 0 - 100 mm Application: sidewalk, cycle path, public area, local road, regional road Features The SPV snow plough is a front-mounted variable geometry plough. It is designed for optimal manoeuvrability and convenient transport. The plough consists of two segments which can be individually or synchronously controlled from the vehicle cab, allowing various operating modes: straight ploughing, A-mode for initial pass, and Y-mode for complete snow clearing without lateral discharge. (See video below) The SPV is an excellent choice for a wide range of winter maintenance tasks, particularly in urban environments with narrow streets and parking areas, where its variable geometry and ability to adapt to space constraints are especially beneficial. Plough Protection System Reliable protection system with spring-loaded folding flaps and support elements in the form of runners or wheels. The blade springs are arranged to ensure constant contact pressure between blade and surface. This ensures high-quality clearing even when passing over obstacles, as the blades return automatically to their working position. Mounting and Attachment Options In addition to the standard mounting plates and three-point attachment, we offer various installation options suitable for different vehicles or machinery, always adhering to all relevant standards to ensure quick and easy attachment or removal of the plough. Njdpfx Aegz Hz Uoghswp Drive and Steering Control is hydraulic, operated via joystick and/or LCD colour display from the cab. The plough's hydraulic system uses reliable, proven components. The snow plough drive can be powered either by the plough-mounted electrohydraulic system (EHS) or by the vehicle’s hydraulic unit. The EHS is an efficient solution for use on vehicles without onboard hydraulics. Blades Wear-resistant steel cutting edges are supplied as standard; upon request, rubber, polyurethane, or combination cutting edges are available for surfaces such as granite, ceramics, etc.

Sąlyga: naujas, tuščias svoris: 1 100 kg, didžiausias leistinas svoris: 2 400 kg, bendras svoris: 3 500 kg, krovimo vietos ilgis: 5 000 mm, krovinių skyriaus plotis: 2 000 mm, krovos erdvės aukštis: 2 000 mm, padangos dydis: 195/50r13c,

Sąlyga: naudotas, rida: 2 659 km, galia: 188 kW (255,61 AG), pirmoji registracija: 08/1983, bendras svoris: 7 899 kg, kuro tipas: dyzelinas, spalva: oranžinė, ašių konfigūracija: 4x4, padangos dydis: 14.5r20, veikimo valandos: 1 488 h, mašinos/transporto priemonės numeris: 573, Įranga: diferencialo užraktas, hidraulika, kompresorius, naudoto automobilio garantija, visų varančiųjų ratų pavara, TÜV can be arranged upon request. The Intrac units are in good condition, purchased directly from the authorities (Swiss Army), exceptionally maintained and serviced with full service history—see photo. The bodywork is in good condition. The Intrac 2011 comes equipped with: 4 steering modes, all-wheel drive, differential locks, 1 main seat plus emergency seat, high off-road capability designed for extremely heavy-duty winter service. The snow blower can also be set at an angle. Tire size is 14.5R20. The drive is fully hydraulic with both high-speed and crawler mode. Gross weight is 7,900 kg. Engine displacement: 12,756 cm³. 24V electrical system. Njdjqx Sz Dopfx Aghewp Several defective Intrac 2011 units with wheel and track drive are also available in stock, each priced at €8,000 (net). All my vehicles can be viewed on my website. – Instead of driving all over Germany from Flensburg to Berchtesgaden to see different vehicles, here you will find over 150 units such as: Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc. – many with current TÜV inspection. – In addition, there is an unbelievable range of spare parts and accessories. – Why settle for less? – Feel free to call. Regards, Philipp

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2009, veikimo valandos: 8 365 h, galia: 143 kW (194,43 AG), variklių gamintojas: Cummins, kuro tipas: dyzelinas, maksimalus greitis: 80 km/h, pirmoji registracija: 12/2009, spalva: oranžinė, bendras svoris: 12 000 kg, bendras aukštis: 3 450 mm, bendras ilgis: 5 200 mm, bendras plotis: 2 500 mm, Įranga: apšvietimas, hidraulika, kabina, oro kondicionavimas, papildomi žibintai, priekinis galios nuėmimo velenas,

Sąlyga: naujas, The UWF 5 is an outstanding conventional milling machine from KNUTH's range of universal milling machines, notable for its large working area and a universally adjustable milling head. This machine ensures precise machining thanks to its precision-ground guideways and a sturdy design made from high-strength cast iron. On the UWF 5, the powerful servo axis motor enables motorized feed on all axes, while the milling table can be swivelled horizontally and the universal milling head can be adjusted in two planes. With a table load capacity of up to 500 kg and comprehensive standard accessories such as a 3-axis position display and a coolant system, the UWF 5 is suitable for both training workshops and repair shops. Order now and benefit from the high operational reliability and increased productivity this conventional milling machine offers. Please note that the UWF 5 belongs to the milling machines category and the universal milling machines group. Nwodpfxsp Aucws Aghjp

Sąlyga: naudotas, rida: 39 425 km, galia: 280 kW (380,69 AG), pirmoji registracija: 06/1995, bendras svoris: 18 000 kg, kuro tipas: dyzelinas, spalva: geltonas, ašių konfigūracija: 2 ašys, pavaros tipas: mechaninis, Įranga: ABS, Chassis frame: ideal for heavy-duty construction site use, service and workshop trucks, motorhomes, expedition vehicles, flatbeds, box bodies, etc. Engine: MERCEDES-BENZ 8-cylinder, ZF-Transmatic manual transmission (WSK), chassis with raised frame, large single tires, reinforced axles, high-mounted exhaust, ABS, rear axle differential lock, driver’s comfort suspension seat Isringhausen, passenger comfort suspension seat Isringhausen, central lubrication system, electric window regulator on passenger door, rear window, heated and electrically adjustable passenger side exterior mirror, heated windscreen, exterior sun visor, tilt-open windows, headlight range adjustment, side reflectors, additional headlights, and much more. Equipped with 2 rotating beacons, fuel pre-heating, front mounting plate, 4 hydraulic connections at the front, NATO jump-start socket, additional headlights, jump-start socket, 380-400V, battery master switch, leaf spring suspension, top condition. The vehicle may have advertising stickers and/or lettering. Nsdpfx Aevnqimsghjwp Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide an offer from our partner workshops! The vehicle may feature advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this unit. Please contact us!