CNC frezavimo ploteris

Sarnox CNC-1325 5,5 kW

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 2650x640x1400 mm Weight: 700 kg Total power requirement: 5 kW Edgebanding Machine KANTOMAX BASIC - Min. / Max. edge thickness: 0.4 - 3 mm - Min. / Max. edge height: 15 - 55 mm - Min. / Max. workpiece height: 10 - 50 mm - Min. workpiece width: 80 mm - Min. workpiece length: 100 mm - Feed drive motor: 1.1 kW - Feed speed: 12 m/min - Operator panel at infeed in eye level - Chain feed system - Support plate for PVC and ABS edge banding - Pressure zone with pneumatically operated main pressure roller and follow-up rollers for glue joint compression - Centrally adjustable top pressure - Glue pot with Teflon coating for hot-melt adhesive granulate - Glue application to workpiece via glue roller - Electronic temperature control, working temperature 180 - 200 °C - Pneumatic roller guillotine - Pneumatic cylinder for workpiece spacing Isdpfovz E T Hox Alreth - Trimming saw unit for front and rear edge overhang. High-precision linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pull saw cut for high accuracy - Flush and radius milling unit upper and lower with vertical and horizontal tracing, 2 motors, each 0.5 kW, 200 Hz, 12,000 rpm - Radius scraper unit with upper, lower, and lateral tracing for rounding pre-milled PVC edges - Buffing unit for finishing edges top and bottom, 2 motors, each 0.18 kW, 50 Hz, 1400 rpm, height-adjustable - Total power consumption: 5.0 kW / 400 V - Extraction port Ø 100 mm - Extendable workpiece support - Noise reduction enclosure with viewing window - Compressed air connection: 6 bar - Dimensions: L=2650, W=640, H=1400 mm - Weight: 700 kg

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 3200 x 780 x 1500 mm Weight: 800 kg Total Power Requirement: 8 kW Edge Banding Machine KANTOMAX BASIC FÜ - Min. / Max. Edge Thickness: 0.4 – 3 mm - Min. / Max. Edge Height: 15 – 48 mm - Min. / Max. Workpiece Height: 10 – 45 mm - Min. Workpiece Width: 80 mm - Min. Workpiece Length: 100 mm - Feed Motor: 1.1 kW - Feed Speed: 12 m/min - Operator console at machine infeed, at eye level - Chain feed Itsdjvz E Evopfx Alreh - Support plate for PVC and ABS edging material - Pressure zone with pneumatically actuated main pressure roller and follow-up rollers for compressing the glue joint - Centrally adjustable top pressure - Glue pot with Teflon coating for hot-melt adhesive granulate - Glue application to workpiece via glue roller - Electronic temperature control, working temperature 180 - 200°C - Pneumatic roller end trimming - Pneumatic cylinder for workpiece spacing - Jointing cutter unit with 2 DIA jointing cutter heads for edge preparation before the gluing station, vertical spindle adjustment, electropneumatic horizontal control, 2 motors, each 1.8 kW, 200 Hz, 12,000 rpm (1 x with, 1 x against feed direction) - End trimming unit for front and rear edge overhangs. High-precision linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pull-type trimming cut for high accuracy - Flush and radius milling unit, top and bottom, with vertical and horizontal probing, 2 motors, each 0.5 kW, 200 Hz, 12,000 rpm - Radius scraper unit with probing from top, bottom, and side for rounding pre-milled PVC edges - Buffing unit for finishing top and bottom edges, 2 motors, each 0.18 kW, 50 Hz, 1,400 rpm; angle and height adjustable - Total power consumption: 8.0 kW / 400 V - Extraction port Ø 100 mm - Extendable workpiece support - Acoustic enclosure with viewing window - Compressed air connection: 6 bar - Dimensions: L = 3200 mm, W = 780 mm, H = 1500 mm - Weight: 800 kg