Automatinė štampavimo mašina - dviguba kolona

SanGiacomo

Sąlyga: geras (naudotas), Gamybos metai: 1994, darbinis plotis: 1 200 mm, spaudimo jėga: 25 t, darbo diapazonas: 1 200 mm, Hochwertige gebrauchte AMADA PROMECAM ITS2 25-12, 1,2 Meter x 25 Tonnen CNC-Abkantpresse zu verkaufen Baujahr: 1994 Spezifikationen: 25 Tonnen x 1.250 mm hydraulische, nach oben arbeitende 3-Achsen-CNC-Abkantpresse, komplett mit HURCO AUTOBEND 7 CNC-Steuerung. Beschreibung: Typ: Hydraulisch, nach oben arbeitend Steuerung: HURCO AUTOBEND 7 Gjdpfjrhirzox Abmsuk Presskraft: 25 Tonnen Biegelänge: 1.250 mm Hub: 100 mm Tischbreite: 60 mm Anzahl der Achsen: 4 Achskonfigurationen: Y, X und R Seitlich: Umzäunung Hinten: Verriegelt

Gamybos metai: 2008, Sąlyga: naudotas, Pressure: 315 t Stroke: 40–200 mm Stroke rate: 20–100 strokes/min Ram adjustment: 120 mm Ram area: 2000 x 1100 mm Table area: 2000 x 1200 mm Pass-through opening in table: 1700 x 250 mm Shut height (ram up, slide adjustment up): 500 mm Lateral frame clearance: 820 x 650 mm Total power requirement: 45 kW Machine weight: approx. 44 t Hydraulic clutch-brake combination Hydraulic overload protection in the ram Semi-automatic stroke adjustment Motorized ram adjustment Stroke rate frequency controlled Central grease lubrication for guides Oil recirculation lubrication Ram counterbalance cylinder Front/rear safety door Hydraulic die clamping system Extendable table plate Hydraulic roll block rails in the table Feed: Helmerding EWH800/150 (V-1341-6518) Strip width: 100–800 mm, strip thickness: 0.5–6.0 mm, max. strip cross-section: 1600 mm² Air blow-off/intermediate venting, height adjustment via gear motor Straightener: R-70/800/9-S (R-1343-6518) Strip width: 100–800 mm, strip thickness: 0.5–4.0 mm Max. strip cross-section: 1600 mm² at 450 N/mm² Gedpordi Dlsfx Abmouk Straightening speed, frequency controlled up to 25 m/min Strip feed assist: transfer table with hydraulically adjustable separation wedge Hold-down, hydraulically adjustable Strip edge guide: 1 pair lateral roller guides, adjustable via handwheel Feed rollers: 2x rollers, Ø140 mm, pneumatically adjustable Straightener: 9x rollers, Ø70 mm, adjustable manually via handwheel Uncoiler: HE-4/800/MOT/HYD (H-1342-6518) Strip width: 100–800 mm Max. load: 4 t Coil inner diameter: Ø508 mm Coil outer diameter: Ø1000–1600 mm Drive, frequency controlled Limiting arms Hydraulic expansion Hydraulic hold-down arm

Gamybos metai: 2020, Sąlyga: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). Gedpeflmdwofx Abmeuk - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Sąlyga: labai geros būklės (naudotas), Longitudinal Seam Welding Machine Make: DALEX Model: PMS 11-4 Nl Throat Depth: 350 mm Rated Power at 50% Duty Cycle: 80 kVA Secondary Short-circuit Current: 23 kA Secondary Open-circuit Voltage: 3.5 - 4.26 V with 2-step switch (High/Low range) Electrode Force: 80-600 daN with attached control cabinet according to VDE 0100 Main switch Synchronous welding control 8036 Weight: 635 kg Gedpotxl Ivofx Abmsuk Sample photo Machine is currently being refurbished

Gamybos metai: 2020, Sąlyga: naujas, The use of a photocell in the workpiece area allows measurement of its length, thereby enabling activation of the spray guns when the workpiece enters detection range, and deactivation of the guns immediately after coating is completed. The photocell is provided as standard equipment. Workpiece identification is carried out using special tags. Identification plates with holes are mounted on the workpiece hanger. Based on this, the PLC controller, in conjunction with the photocell, identifies the painted item and activates or deactivates the spray guns at the appropriate moment, resulting in savings of both energy and powder coating material. Vertical contour detection of the workpiece shape: Guodpfx Aofy T Arobmok The use of light barriers with horizontal sensors enables the PLC to analyze the vertical profile of the workpiece. The PLC controller calculates the time at which the workpiece should appear in the gun zone; based on this, selective activation or deactivation of the spray guns is possible. Integration of light barriers with multiple sensors, both horizontally and vertically: This approach enables precise measurement of the workpiece’s dimensions, which also allows for manipulator control if required. The benefits of using photocells or light barriers are primarily the savings in powder and energy. Unnecessary spraying is eliminated in areas where no workpiece is present. Precise gun control is achieved through the use of light barriers.

Sąlyga: naudotas, Gamybos metai: 1979, Technical Details: Pressing force: 250 t Ram stroke: 40-160 mm Throat depth: 545 mm Ram adjustment: 110 mm Table size: 1250x800x100 mm Maximum distance between table and ram: 670 mm Drawing force: 16 t Table height above floor: 1000 mm Ram clamping surface: 900x670x100 mm Clearance between uprights: 500x400 mm Total power requirement: 23 kW Approx. machine weight: 16.6 t Machine dimensions (LxWxH): 2.8x1.4x3.7 m Control cabinet dimensions (LxWxH): 1.15x0.6x2.1 m Drawing device: Ejector and blank holder force each 16 t Table with 4 parallel T-slots (1250x800x100 mm) Ram plate with 4 radial T-slots Accessories: Gsdpfx Abeu Nfinemouk - Steel plate 1170x860x80 mm

Sąlyga: naujas, Power & Free Conveyor Systems Overhead-mounted Power & Free conveyor systems feature free trolleys driven by chains and carriers that transport material to a designated location. The carriers are attached to the free trolleys and are typically engaged to the drive chain via a dog fitted to the free trolley. The dog can be disengaged by a cam action, either within the free trolley or at the chain dog, usually triggered by accumulating behind another free trolley or engaging a stop blade. The chain continues to move while the carrier remains stationary until the free trolley is re-engaged with the chain. Applications: Gjdedy Eyvjpfx Abmsuk - Accumulation - Assembly - Bias & Trias overhead rail work - Indexing transport - Elevation changes - Production rate variation - Sorting - Start/Stop - Warehousing - Transfer Advantages: - Cast components made from high-strength alloys increase service life - Stainless steel chain dogs - Modular conveyor components - Stops are simple, compact, and meet industry standards - Computerized or programmable control systems Not possible with standard overhead conveyor systems: • Automatic starting and stopping of the system with switches and sensors • Transferring transported materials in various directions using scissors mechanisms on the rails • Conveying at different speeds in different conveyor sections • Convenient control via integrated PLC-based control systems • Our designs are developed by our experienced engineering team to maximize production time and create an economical system requiring minimal maintenance.

Sąlyga: naujas, Gamybos metai: 2017, mašinos/transporto priemonės numeris: DF0149, Pressure: 2x 75 / 150 t Passage width: 2050 x 965 mm Stroke: 800 mm Total power requirement: Main motor 22 kW Machine weight approx.: 6.5 t Space requirement approx.: 1500 x 1025 mm Lower ram: 150 mm Upper ram: 150 mm Base plate (steel): 72 mm Additional motors and consumers: 2 kW Upper ram dimensions approx.: 870 x 350 x 150 mm Lower ram dimensions approx.: 1500 x 600 x 150 mm Gujdpfjd Aftpjx Abmjk Base plate: 1500 x 1025 x 75 mm Top plate: 1500 x 1025 x 150 mm Guide column diameter: 120 mm Piston diameter: 80 mm Oil tank: 350 l Oil requirement: 320 l Travel distance of both lift cylinders and the pressure cylinder each: 350 mm Max. open height: 1600 mm Pressing speed: 15–0 mm/sec Lifting speed: 100 mm/sec Window size approx.: 2050 x 965 mm Wall thickness approx.: 6 mm Position control accuracy via non-contact sensors: 0.5 mm The press is equipped with two column guides, each with a diameter of 120 mm, guiding both the lower and upper rams. The guides are made of bronze. The lower ram is robustly designed with a thickness of 150 mm. The upper ram is also equipped with a 150 mm thick steel plate. The machine’s base plate is made of 72 mm thick steel, ensuring tip-over stability during movement. For this reason, the oil tank with the hydraulic unit is also mounted close to the base. Both the hydraulic system and the electrical components are directly integrated into the machine and protected from contamination by an enclosure. To dissipate the resulting heat, the machine is equipped with an oil cooler mounted on top of the press. The control cabinet is also equipped with air cooling. For any future maintenance work on the hydraulics, the inner rear panel of the press can be easily removed. The two-hand control is fixedly mounted to facilitate transport; however, it remains articulated and movable. High-resolution light curtains prevent personnel from entering the danger zone. For user-friendly operation, the machine features transparent acrylic windows (6 mm thick) on both sides. These may need replacement after several years of use, but the costs involved are minimal. Additionally, the press is equipped with four powerful LED lights built into the top plate.

Sąlyga: naujas, Cardan conveyors are trolley models consisting of 4 bearing groups that move within a closed track. These types of conveyors are indispensable due to their vibration-free operation, automatic lubrication function, and robust design. Gujdedy Eytjpfx Abmjk The drive unit of the universal joint shaft is mounted on top and designed either as a caterpillar type or a side-mounted gearbox equipped with a safety switch. Distances between the chain hangers are 400 mm and available in multiples thereof. Through the central lubrication unit within the system, the chain bearings are lubricated automatically at the desired interval. The torque limiter is used to protect the conveyor system in the event of compressed drive units or excessive force. The chain-mounted bearings can operate at up to 250 °C. The conveyor chain tensioning system can be implemented with either a spring or a bolt. The cardan conveyor rail is particularly robustly bent from sheet metal. In long conveyor systems, multiple drive units are used, with synchronised operation between the drive units ensured in such systems. According to requirements, there are three types: light-duty, medium-duty, and heavy-duty. • Cardan conveyors are based on movement of the cardan chain in three axes along the cardan rail. • Types of cardan drive units: overhead caterpillar or side drive with a torque-protected system. • Distances between chain saddles are 400 mm and their multiples. • Thanks to the central lubrication unit, the chain bearings are automatically lubricated at the desired interval. • The torque limiter protects the system against blockages and overload on the drive units, safeguarding the conveyor system. • The bearings mounted on the chain can operate at temperatures up to 250°C. • The conveyor chain tensioning system can be implemented with a spring or a bolt. • The cardan conveyor rail is specially bent from sheet metal. • In long-track conveyor systems, multiple drive units are used, with synchronised operation between units ensured. • There are three variants depending on requirements.

Sąlyga: naudotas, Gamybos metai: 1978, Pressure 150 t Fixed stroke 80 mm Stroke rate 30 - 150 /min Upright gap width 930 mm Shut height (stroke + ram adjustment at top) 400 mm Side frame opening 650 mm Table area 880x1300 / 1500x600 mm Pass-through opening in table 760 x 180 mm Table height above floor 1270 mm Gujdpfx Aevut Urebmek Ram area 920x1000 / 1300x600 mm Weight 27.5 t Space requirements approx. 3.1 x 1.8 x 4.3 m Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, fixed stroke, motorized ram adjustment, pneumatic ram counterbalance, central lubrication WITHOUT feed as is, without commissioning Price for commissioning (with new control system) on request