"Sandvik" teleskopinių strėlių gamyba

Sandvik Telescopic Boom Manufacturing

Gamybos metai: 1978, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Fpsdpfxoiw Dlke Ab Seb Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Tensile force: 6.3 t Broaching speeds: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special features: - Coolant / lubricant unit - Without automatic tool feeder - Oil and chip tray (approx. 2,000 mm) Note: The machine is ideal for machining keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Reishauer RZ 362A su apie 60 rinkinių deimantinių diskų Šlifavimo sraigtų matmenys: Min./Maks. išorinis skersmuo: 280/350 mm Plotis: 84/104 mm Maks. žingsnis su apribojimais: MOD 8.0 (DP 3,2) Sriegių kiekis: su apribojimais iki 3 Maks. naudojamas plotis (poslinkio eiga): 90 mm Išsamesnę techninę informaciją rasite pridėtame PDF faile. Priedai: Profilinimo įrenginys Fpsdpexb Ufuefx Ab Sjb Apie 60 rinkinių deimantinių diskų Šlifavimo akmenys Turbo separatorius

Gamybos metai: 1997, Sąlyga: paruoštas naudoti (naudotas), With DC26 carrier articulated steering, power: 108 kW, maximum travel speed: 16 km/h, tire size: 14.00 R24 A, 2x BUT 35 drill arms, Deutz BF4M 1013C diesel generator set, BMH 6414 drill feed units, maximum drill rod length: 4,321 mm, maximum drilling depth: 4,020 mm, HL 210 loading platform, CE standard, air/water flushing, heat exchanger and Swellex high-pressure pump, without drill hammers. Fedpfx Absl Tn Epj Sspb

Sąlyga: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 10 000 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 105 mm, tekėjimo skersmuo: 610 mm, veleno greitis (maks.): 3 500 aps./min, veleno skylė: 70 mm, X ašies eiga: 580 mm, Y ašies eiga: 210 mm, Z ašies eigos atstumas: 1 137 mm, tvirtinimo skersmuo: 63 mm, sukimosi greitis (maks.): 6 000 aps./min, įvesties srovės tipas: Oro kondicionierius, Įranga: sūkių greitis be galo kintamas, The machine is in good condition. Major maintenance work in recent years: 30.04.2020 Milling spindle overhaul CHF 35,000 16.07.2021 Software update (Wenk AG) CHF 1,600 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: ·Error message at startup ·Coolant for internal cooling flows out at the rear side of the milling spindle ·Overload message when the machine is cold and rapid traverse is at 100% ·Over 150 various tool holders ·Spare bushings for the tool magazine Fsdpfx Absxp Hmae Sopb ·Spare limit switches for the tool changer position monitoring ·2 pieces 3-jaw chuck, diameter 250 mm (mounted during inspection) ·1 piece 3-jaw chuck, diameter 250 mm ·1 piece 3-jaw chuck, diameter 300 mm ·1 piece 4-jaw chuck, diameter 400 mm ·2 sets hard jaws for external clamping, short version ·1 set hard jaws for external clamping, long version ·Various sets of soft jaws, used ·Replacement filters for the Kowap high-pressure unit (5 pieces in stock, approx. 2 pieces by delivery – 1 filter approx. 20-25 CHF) ·Coolant purification system or oil separator (custom-made) ·Cabinet suitable for the tool magazine, adapted for KM63 holders and numbered with 80 slots ·Specific clamping accessories suitable for KM63 holders, which allow direct clamping of indexable inserts ·Iscar side milling cutter suitable for one holder, D160mm, width 4mm ·Gear cutter suitable for one holder (custom-made – for soft jaws p=1.5mm) ·Cleaning/deburring brush suitable for one holder We can also provide you with leasing and financing offers for the machine. An inspection appointment can be arranged upon request.

Sąlyga: labai geros būklės (naudotas), Wheel diameter - max. 300 / 400 mm Wheel width 76 mm Module - max. 6 Module - min. 0.5 Control system BWO CNC 921 Fpsdpouwwlqofx Ab Sob Stroke position adjustment 94 mm/stroke Stroke 82 mm Stroke rate 75 - 1000 strokes/min Number of teeth 5 - 200 Cutter head arbor SK 45 Table diameter 400 mm Total power requirement 50 kW Machine weight approx. 7.5 t Space requirement approx. 5.0 x 3.8 x 3.4 m Machine in very good condition!

Gamybos metai: 1985, Sąlyga: naudotas, Workpiece diameter: 25–90 mm Thread length: 3,000 mm Thread pitch: 2–16 mm Total power requirement: 25 kW Machine weight approx.: 10.5 t Space requirement approx.: m O F F E R We can offer you the following, subject to prior sale and errors excepted, ex stock without obligation. WALDRICH COBURG Whirling machine / peeling machine for the production of threads, worms, ball screws or similar components Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Fedpstzdyzefx Ab Sjpb Thread diameter: 25 – 90 mm Max. thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Pitch angle max. up to Ø 55 mm: 15° Pitch angle max. descending up to Ø 90 mm: 8° Whirling head speed, stepless: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore diameter of clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive approx.: 25 kW – 380 V – 50 Hz Weight: approx. 10,500 kg Accessories / special features: • Robust whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests, integrated with prism guides. Manual thread depth adjustment and optical pitch angle setting on the support. • Powered tool head, normally equipped with 4 tools: 2 roughing tools, 1 flank tool, 1 deburring tool. • Workpiece speeds and pitch feed are finely adjustable using change gears. Separate rapid traverse for resetting the whirling slide. • Simple indexing unit for whirling multi-start threads. • Additional setup for whirling threads longer than the centre distance with intermediate support. • For correcting lead-screw errors, thermal expansion of the workpiece, or errors during additional setups, the machine is equipped with a compensation device. This enables both an electronically programmed compensation of the lead-screw as well as workpiece-specific linear compensation using a wedge system. • Motorized tailstock adjustment with automatic stop by contact pressure sensor. • Comprehensive accessories including cutting tools, toolholders, collets, accessory parts, setting devices, gauges, and operating tools. • Central lubrication, coolant system, separate control cabinet, operating manuals. The machine is suitable for roughing and finishing of single and multi-start right- and left-hand threads, worms, ball screws or similar workpieces!

Sąlyga: naudotas, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Spindle taper internal MK 4 Table diameter 160 mm Fpsdpfsu Uu S Tox Ab Ssb Table bore diameter 75 mm Strokes per minute 355 – 630 Feed range 0.008 – 0.4 mm/stroke Space requirements approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg Year of manufacture: approx. 1970 Hydraulic clamping on table Change gears

Sąlyga: naudotas, Gamybos metai: 2008, X ašies eiga: 650 mm, Y ašies eiga: 650 mm, Z ašies eigos atstumas: 680 mm, veleno greitis (maks.): 24 000 aps./min, L.-No. 5.3-745 1 used horizontal machining center Heckert HEC 400D, year 2008 CNC control Sinumerik 840D NC rotary table, B-axis Automatic tool changer for 80 tools Pallet changer, 2 pallets 400 mm x 400 mm Through-spindle coolant device (IKZ) Chip conveyor Coolant unit Technical details: X-axis travel (longitudinal): 650 mm Y-axis travel (vertical): 650 mm Z-axis travel (cross): 680 mm B-axis: 360° Spindle taper: HSK 63A Spindle speed range: 24,000 rpm Tool magazine capacity: 80 Machine weight approx.: 13,000 kg Technical data, accessories, and machine description are non-binding. Fpodpjrairwsfx Ab Ssb

Sąlyga: naudotas, Gamybos metai: 1983, Wheel diameter - max. 1800 mm Wheel width 000 mm Module - max. 18 Axial slide travel 1000 mm Distance - table to counter support arm 1800 / 1467 mm Milling spindle taper SK 55 Cutter diameter 300 mm Cutter width 375 mm Center distance between spindles 100 - 1060 mm Milling slide swivels 240 degrees Table diameter 1200 mm Table bore 300 mm Taper MK 6 Number of teeth - min. 9 Milling spindle speed 20 - 150 rpm Axial feed 1 - 1000 mm/min Radial feed 1 - 300 mm/min Fpjdpfx Abev Saw Io Sjb Tangential feed 1 - 225 mm/min Electrical system - voltage/frequency 380 / 50 V/Hz Control Sinumerik 3 M Total power requirement 69 kW Machine weight approx. 26.5 t Space requirement approx. 8.0 x 4.0 x 5.6 m Suitable for straight and helical cylindrical gears and worm gears Form milling attachment Speed programming Electronic handwheel

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, mašinos/transporto priemonės numeris: GM 3941/02, A total of 3 x Grob BZ500 are available. (Please submit your offer price.) Sale only within Europe, including Turkey. Price without packaging; delivery term: FCA (machine location). Fjdpfxomk Utre Ab Sepb Technical data can be found in the attached handout. Any warranty rights are excluded. We do not guarantee the accuracy of the technical data and year of manufacture, the completeness of accessories and tooling, nor compliance with any safety or environmental regulations mentioned in accident prevention guidelines. No sale to private individuals. Sales only within Europe, incl. Turkey. Price excludes packaging; delivery condition: FCA (machine location). Technical data—see handout in attachment. German text is the lead version. Sold as is, with no guarantee or warranty, including completeness of tools & accessories, or compliance with environmental and safety regulations. No sales to private individuals.