SACMA SP22 PROGRESYVIOS SPAUDOS MAŠINA NAUJA

SACMA SP22

Būklė: naudotas, Gamybos metai: 1976, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: M08I/8941, Pasiūlymo numeris: M08I/8941 Mašinos tipas: 2 matricos – 2 smūgio presas Gamintojas: SACMA Modelis: SP22 Metai: 1976 Skersmens diapazonas: 10 mm Matricų skaičius: 2 Pakopų skaičius: 3 Lsdpfewi Td Iex Af Hjrr Ruonos ilgis: 110 mm Kotelio ilgis po galvute: 100 mm Našumas – vnt./min: 170 Vieta: Vokietijoje

Būklė: naujas, Gamybos metai: 2024, veleno ilgis po galvute: 80 mm, sriegio ilgis: 55 mm, važiuojamoji greitis (maks.): 480 mm/min, E.W. MENN GW63 Flat Die Thread Rolling Machine with Rack-Type Dies Completely overhauled as new. New guides, vibrator, and new vibrating discharge system. New electrical system with inverter and PLC control. Thread size: M8 x 80/55 mm. Production rate: 480 pieces per minute. Lrsdpfxet Uucaj Af Hsr Thread diameter (min./max.): 3 - 8 mm. Die length: 115/130 mm. Available for inspection and testing at HBR Srl - Calolziocorte (LC).

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1970, Funkcionalumas: visiškai funkcionalus, veleno ilgis po galvute: 30 mm, dalies ilgis (maks.): 52 mm, Double-action press Hilgeland CH1 KHA Lrsdpfxour N Dae Af Hor Year of manufacture: 1970 The machine is immediately ready for operation!

Gamybos metai: 1988, būklė: geras (naudotas), Carlo Salvi 1-Matrize 2-Schlag Modell 780/SV Maximaler Abschneidedurchmesser (mm): 6,35 Lrjdpfx Aehrdmxjf Her Maximale Abschneidelänge (mm): 97 Maximale Ausstoßlänge (Stempelseite) (mm): 80 Maximale Geschwindigkeit (Stück/Minute): 360

Būklė: naudotas, Thread rolling machine, cold rolling machine, thread roll machine, profile rolling machine Manufacturer: PEE-WEE Model: UPW 24 Serial no.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool mounting length/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor output: 3 kW Roll drive motor output: approx. 5.5 kW Mains connection: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed in 4 steps via gear shifting - Hydraulic unit integrated in machine bed - Operating manual with electrical schematic diagram Ledpeuz If Nofx Af Herr Required space (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools have three sections – the lead-in, the calibration section, and the lead-out. Groove rolls have no pitch and are swiveled to match the lead angle of the profile to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and swivel angle results in the lead angle in the workpiece.

Būklė: naudotas, Gamybos metai: 1988, mašinos/transporto priemonės numeris: 724306, Pressure: 63 t Strokes: 400 strokes/min Sheet width: 180 mm Stroke: 10 - 80 mm Feed length: 150 mm Strip width: 180 mm Control: KAISER Voltage: 380 V Space requirement approx.: 1.85 x 2.70 x 3.00 m Lrjdecxxt Tspfx Af Hjr + original Kaiser gripper feeder Model ZR 18 D

Būklė: naudotas, Gamybos metai: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm CNC control: TNC 530 Spindle operating hours: not yet known Milling spindle speed range: 1: 30 to 930 and 2: 930 to 4000 / stepless rpm Tool holder: horizontal/vertical: SK 50 (DIN 69871/DIN 69872 Type A) Spindle torque: 1000 Nm Spindle head swivels left and right: 90° Feed rate: 1 - 6000 mm/min Feed force: 30 kN Rapid traverse: 15 m/min Number of tools: 1 pc. Clamping surface table L x W: 1600 x 800 mm Table load capacity: 40 kN Operating voltage: 400 V / 50 Hz Total power requirement: 42 kW Machine weight approx.: 15.2 t Compressed air: 6.3 bar Machine dimensions approx. L x W x H: 3.1 x 4.7 x 2.6 m Dimensions: coolant filter: 1.9 x 1.6 x 1.4 m Required floor space approx. L x W: 38.5 m² Applications: Milling, drilling, thread cutting, boring with direct encoded linear measuring systems the guides for all three axes are flat slideways milling head position controlled +/-90° internal coolant supply (IKZ) and external cooling milling spindle rated drive power 22 kW Lrjdpfx Afou Nc Rij Her with integrated hydraulic unit up to 100 bar operating pressure with coolant system, high pressure pump 60 bar (internal cooling), nominal flow 20 l/min, and low pressure pump 4 bar (external cooling), as well as spray gun compact belt filter RESY REBER SYSTEMATIC GmbH, Type KBF 452/710 hinged belt chip conveyor DGS, Type SSF 600 P50, year 2004 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO

Būklė: naudotas, Gamybos metai: 1997, mašinos/transporto priemonės numeris: 5284, Pasiūlymas 26156 Techniniai duomenys: - Centrinio smaigalio aukštis: 120 mm - Centrinė atstumas: 450 mm - Maksimalus apsukų skersmuo virš lovos: 250 mm - Veleno skylė: 23 mm - Verpti veleno tvirtinimas su sriegiu nosa DIN 55027 - Galinio atraminio kūgio kampinis: MK 2 - 20 veleno sukimosi greičių: 60–3000 aps./min - Pėdos eiga - išilgai: 0,03–3,0 mm - skersai: 0,015–0,150 mm - Sriegio žingsnis: 0,25–5 mm - Pavara: 400 V / 1,1 / 1,5 kW - Vietos poreikis apie: P 1200 x A 1250 x G 650 mm - Svoris apie: 700 kg - Komplekte: - 3 žandikaulių griebtuvas - Multifix greito keitimo įrankių laikiklis su 3 įdėklais - Besisukantys centruoti taškai - Įtveriamųjų įvorėlių rinkinys Ljdpfx Aezf Ag Ujf Herr

Būklė: geras (naudotas), 1 used radial drilling machine Make: Stimin Model: GR 820 H Serial No.: 773 Year: 2004 Technical specifications: Drilling capacity: 80 mm Arm reach: 1600 mm Drill spindle taper: MK 6 Drill spindle stroke: 390 mm Spindle speeds, 24 steps: 20 – 1400 rpm Right-/left-hand rotation Feed, 12 steps: 0.045 – 1.5 mm/rev Drive: 400 V / 14.5 kVA Arm and drilling unit clamping: electromechanical Lrodpetzctmsfx Af Hjr Distance from machined machine bed to drilling spindle: min. approx. 400 mm max. approx. 1800 mm Usable machine bed with 4 T-slots: 1170 x 2185 mm Coolant system 2 clamping tables Required floor space approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8,500 kg

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding head swiveling: 180° ± Grinding spindle speeds: 1500, 1700, 2200 rpm Infeed in steps: 0–40 mm/Ø Continuous infeed: 0–40 mm/Ø Table swiveling: ±6.5° Longitudinal table travel: 1530 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece weight max. (between centres, including clamping): 130 kg Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guideline Including new, modern and future-proof control system. Photo shown: Example of an already delivered machine with special options -The operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original controller, so no retraining is required. -Diagnostics function with display of PLC notifications and digital I/Os -Dressing function can be expanded or modified on request. -Spindle positioning of the workpiece spindle available on request. Lodpfouxftrox Af Hsrr -New maximum infeed: 40 mm, can be extended on request. -Digital readout on 2 axes. X-axis resolution: 0.5µm Options: -Encoder with digital readout on workpiece headstock -Encoder with digital readout on grinding headstock (no height adjustment possible with spindle) -New robust internal grinding device, Ø80 mm or Ø100 mm -Increase of centre height up to 225 mm -Spindle speed control for grinding spindle Included: -Operating tools -Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic longitudinal and rapid table traverse. Versatile application possibilities in production for external and internal grinding, or for external, face, and internal grinding in a single setup for individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Gauging control The machine currently does not comply with the basic health and safety requirements as specified in BetrSichV 2015. The required minimum safety target must be determined by a risk assessment according to BetrSichV.