Frezavimo staklės

Sachman T10 HS

Sąlyga: naudotas, Gamybos metai: 1986, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Very well-maintained machine. The machine comes from a precision grinding workshop in the Black Forest. Still under power at the previous owner’s site and can be inspected for a short time. In 2022, the machine underwent a partial overhaul and servicing at our facility, including restoration of the geometry to manufacturer's specifications. Equipment: Ljdpfxjv Tqqns Af Iorg - 2-axis FAGOR digital readout - Sine bar - Tailstock with fine adjustment - Hydraulic tailstock - Face grinding attachment - Internal grinding attachment - Fischer UJ70 internal grinding spindle - Paper band filter - Automatic cycle: roughing - finishing - spark-out - retraction

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1845/455, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, bearing replacement, belt replacement, spindle disassembly, replacement of seals and O-rings + adjustment. Newly painted. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, belt replacement. New spindle bearings. Newly painted. Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, belt replacement. New spindle bearings. Newly painted. Internal Grinding Attachment Disassembly, cleaning of parts, replacement of worn and defective components, assembly of the mounting and alignment of geometry. Newly painted. Hydraulics Disassembly, motor replacement, replacement of hoses and worn or defective parts. Hydraulic block checked. X Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., hydraulic piston overhaul, table grinding. Z Axis Disassembly, table grinding, replacement of worn and defective parts, hydraulic piston overhaul, scraping of V and flat guides. Newly painted. Measuring System 2-axis digital readout included Electrical Cabinet Replacement of motor terminals and relay controls. New wiring. New frequency inverter for the workhead. TECHNICAL SPECIFICATIONS Distance between centers 1500 mm Distance between centers (headstock and overhanging tailstock) 1650 mm Center height, standard 125 mm Center height with raising blocks 225/250 mm Maximum grinding diameter Ø 250 mm Maximum grinding diameter with raising blocks 450/500 mm Table Usable surface 2060x140 mm Maximum length and width for surface grinding 1750x200 mm Manual or hydraulic longitudinal travel 1750 mm Manual table movement per handwheel revolution – coarse 20.006 mm Manual table movement per handwheel revolution – fine 2.457 mm Continuous table speed, hydraulic –6 m/min Table swivel 6° Stop, return 0–5 sec. Work Spindle Workpiece speeds, continuously variable 20–400 min-1 Swivel 360° Work spindle internal taper MT5 Tailstock Tailstock spindle internal taper MT3 Lrsdpfext Ilfsx Af Ieg Manual or hydraulic spindle retraction travel 30 mm Dressing diamond internal taper MT0 Universal Grinding Head Transverse wheel slide travel 285 mm Rapid traverse, wheel slide (forwards & backwards) 40 mm Grinding spindle speeds 1500 – 1700 – 2200 – 3600 min-1 Vertical movement of grinding spindle, center height 125–330 mm Cylindrical grinding wheel, max 400x50x127 mm Surface grinding wheel, max 250x20x76 mm Swivel of grinding head with locking at 90° increments 270° Wheelfeed One division of vernier 0.005 mm/Ø Automatic feed, max 0.9 mm/Ø Motors Grinding spindle motor 2,900 min-1 / 4.0 hp Workhead spindle motor 3,000 min-1 / 2.0 hp Coolant pump motor 2,850 min-1 / 0.12 hp Internal Grinding Device Bore 70 mm Int. grinding spindle speed Ø70 mm 14,000 min-1 Int. grinding spindle speed Ø50 mm 21,000 min-1 Unless otherwise stated, the technical data is provided without guarantee of accuracy or completeness.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1988, Funkcionalumas: ribota funkcionalumas, mašinos/transporto priemonės numeris: 25.05.004, bendras ilgis: 9 500 mm, bendras plotis: 2 250 mm, bendras aukštis: 2 300 mm, įėjimo įtampa: 380 V, galia: 50 kW (67,98 AG), bendras svoris: 21 000 kg, tuščias svoris: 18 000 kg, suslėgto oro jungtis: 7 juosta, Įranga: dokumentacija / vadovas, Paper size 730 x 1060 mm and printing area 710 x 1040 mm. Paper thickness 0.05 mm - 0.5 mm. The set maximum speed (due to simulating the travel time of fast printing presses) is 4000 sheets/hour, but the machine is capable of much higher speeds for commercial work. Four-cylinder central impression cylinder that completes all four printing units in one gripper closure. 1988 FAG Speedproof with control console for ink fountains and cylinder adjustment for extremely precise register printing. Attached is the original factory brochure. Fully dry ice cleaned and cylinders are in very good condition. The machine is offered strictly 'as is'. Maximum width is 225 cm, maximum height is 230 cm; shipment in a High Cube container is possible. The price is strictly fixed and based on removing components that we could sell separately, such as the Mabeg feeder with vacuum belt and the four-stage Baldwin stainless steel unit, with individual baths, mixers, and adjustable temperature for each color—meaning all four baths can be set to different temperatures and alcohol percentages. The machine has been dry ice cleaned. It was intended to play a prominent role in electronic paper printing, but due to excessive start-up losses, the project was canceled. The machine has been with us for three years now, and due to its size, I want it sold as soon as possible. Hence this very low price. It is an excellent machine. If the machine must be set up for testing and trial runs, this is possible at an extra cost of €10,000, of which €5,000 must be paid in advance as a conditional deposit. Lrsdpfjuf Sy Asx Af Ieg All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data • Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) • Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) • Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) • Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) • Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) • Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) • Max. speed: 4000 sheets/h • Floor space requirement (including access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) • Press height: 230 cm (90.55 in.) • Weight (incl. paper in feeder and delivery): approx. 18,000 kg (approx. 39,690 lb) • Total power requirement: approx. 50 kW • Compressed air supply: 6 – 7 bar

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2002, Technical specifications are subject to change without prior notice. Axis travel ranges of the CERUTI 25 model: X-axis: Travel range 10,000 mm, electrical emergency overtravel 2 mm (max), mechanical emergency overtravel 50 mm. Y-axis: Travel range 2,500 mm, electrical emergency overtravel 2 mm (max), mechanical emergency overtravel 50 mm. Z-axis: Travel range 1,000 mm, electrical emergency overtravel 2 mm (max), mechanical emergency overtravel 50 mm. A-axis: Travel range +/- 95°. C-axis: Travel range +/- 200°. T-axis: Continuous motion. Operating speeds of the linear axes: X, Y, Z axes: 20,000 mm/min. Axis accelerations: X-axis: 1,000 mm/sec². Y, Z axes: 1,000 mm/sec². Note: Accelerations may vary depending on the installed CNC control unit. Spindle: Type: ISO 40, ISO 50, electrospindle HSK A63. Power: 30 kW. Torque: 280 Nm. Maximum speed: 12,000 rpm. Mounted tool holder type: Ledjv D U Ifjpfx Af Ierg HSK A63. S.G.M. tool changer: Number of positions: 20, 30, 74. Maximum tool diameter for adjacent positions: 100 mm. Maximum tool diameter for non-adjacent positions: 200 mm. Maximum length: 300 mm. Maximum tool weight: 12 kg. Tool change time: 20 sec.

Sąlyga: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness with veneer strips (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control/Software: ICOS Open Feed speed (m/min): 10 - 50, without transmission bar (Master & Slave systems) Stop cams retractable, distance (mm): 1080 FORMAT PROCESSING (per side): Ledpfx Afjd Nt Rqe Ijrg Protective cutter (pre-milling) 75.186 (1 x kW 4.4) Chipping unit (2 x kW 8) Jointing milling unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): Gluing unit (hot melt adhesive) 283.1513 04.1570 + 283.205 Edge pressure zone – edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 1) 0° - 30° Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servomotors Profile scraper unit 08.519 Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-4 (4 x kW 0.18) Universal milling unit for grooving/rebating and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Sąlyga: naujas, Gamybos metai: 2022, Brand new power generator set, consisting of two gensets housed in a single enclosure, based on Scania engines. Synchronisation with other generator sets or units is possible, as well as optional synchronisation with the grid. Maximum output (E.S.P.): 902.0 kVA / 722.0 kW Rated power (P.R.P.): 820.0 kVA / 656.0 kW Controller type: ComAp InteliGen 500 User-friendly, intuitive graphical interface. Lrodpfsmrqi Ejx Af Ieg

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 40 [kW] - Spindle speed: 12,000 [rpm] - Gearbox - Number of spindle speed ranges: 2 LINEAR AXES - Travel X/Y/Z axes: 2400/1650/1750 [mm] - Rapid traverse speed (X/Y/Z): 42 [m/min] Lrodpow Ephbsfx Af Ijg - Feed rate (X/Y/Z): 20 [m/min] SWIVEL AXIS B - Travel: 360 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Bras charger - Number of tools in magazine: 116 - Tool change time: 3.8 [sec] PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1600 x 1250 [mm] - Number of pallets: 2 - Max. pallet load: 5000 [kg] - Distance from table centre to spindle nose: 100 - 1750 [mm] - Max. workpiece diameter: 2500 [mm] - Max. workpiece height: 1850 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive capacity: 86 [kVA] WEIGHT AND DIMENSIONS - Required space: 9,485 x 6,155 [mm] - Machine height: 4,370 [mm] - Machine weight: 50,000 [kg] MACHINE HOURS - Operating hours: 15,446 [h] ACCESSORIES - Controller: Fanuc 31i-model B5 Interface: Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic hand wheel - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 70 [bar] * internal coolant supply (IKZ) * with paper filter * with coolant chiller * with rinse gun * with cabin wash - Chip conveyor - Spindle cooling - Tool probing system - Workpiece probing system: Renishaw RMP60 - Tool breakage monitoring: SOFT AC - Number of pallets: 2 - Vise - Tool holder

Sąlyga: labai geros būklės (naudotas), Grinding length without magnetic chuck: 1500 mm Maximum grinding width: 750 mm Longitudinal travel, X-axis: 1520 mm Cross travel, Y-axis: 650 mm Vertical travel, Z-axis: 690 mm Grinding wheel diameter: 406 x 100 mm Spindle speed: 1400 rpm Weight: 8600 kg Accessories: Braillon magnetic chuck 1000 x 500 mm Lrsdpjwlh Adsfx Af Ijg Electronic control: Elcon 3

Sąlyga: naudotas, Gamybos metai: 2008, Technical Details: x-axis travel: 1400 mm y-axis travel: 1200 mm z-axis travel: 1350 mm Control system: MSX-701 Mapps III Table clamping surface: 800 x 800 mm Rapid traverse: 50 m/min Table rotation: 360,000 x 0.001° B-axis Table load capacity: 2.0 t Number of pallets: 2 Spindle speed range: 8,000 rpm Spindle drive power: 37 kW Tool magazine capacity: 60 tools Tool holder: HSK-A 100 Weight: 31 t Dimensions (L x W x H): 5.5 x 2.8 x 3.68 m 4-axis horizontal machining center in excellent condition Lredpfx Aewi Ibuof Ieg Equipment: - Through-spindle coolant, 70 bar - Face contact tool spindle - Cylindrical interpolation - Taper/spiral interpolation - Synchronous tapping and milling - Chip conveyor + Concept 2000 - Knoll filtration system - LTA mechanical oil mist extraction system - Electronic handwheel - Renishaw workpiece probe - Glass scales on X/Y/Z axes - 5 free M functions - Extended part program memory, 1 MB - 48 additional zero points - Dynamic fixture correction - Double ball screws on X/Y/Z axes - Program restart after interruption - 2x coolant guns

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, veikimo valandos: 8 155 h, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 1 800 mm, padavimo eiga Y ašimi: 1 000 mm, padavimo ilgis Z ašis: 1 000 mm, veleno greitis (maks.): 4 000 aps./min, veleno greitis (min.): 50 aps./min, stalo plotis: 850 mm, stalo ilgis: 2 000 mm, bendras svoris: 13 500 kg, galia: 30 kW (40,79 AG), CME FS-2 Bettfräsmaschine mit nur 8.155 Betriebsstunden Steuerung Heidenhain 426B inkl. Messtaster und kompletter Dokumentation Lrsdjquqq Ajpfx Af Ijg