Smulkintuvas

Robust SD 70/30 kW

Gamybos metai: 2024, Sąlyga: naujas, The world’s flattest timber frame assembly table = 3 cm! Delivered without timber boards. Text line break with the following specifications: Included components: - 1 double rail (zero stop) - 10 perforated rails - 10 rack-and-pinion clamps - 14 adjustable end stops - 14 interchangeable outside wall pressure plates - cordless impact driver - bit adapter - 50 dowels MMS 10x70/5 - hammer drill bit 8x165 Dimensions: Clamping length: 0 to 3,550 mm Hole grid: 140 mm With a board width of 1,250 mm = table length 12,350 mm Max. clamping force approx. 250 kg Clamp stroke: 340 mm End stop height: 100/160 mm This assembly aid was developed to enable precise production of timber frame construction elements. Special attention was paid to space requirements and price. Thanks to the extremely flat design, the area can be repurposed for other uses simply by removing the clamps and stops. This is a significant advantage not just for small companies, but also for operations of all sizes. After creating a level surface, the clamping rails are aligned and anchored to the floor. The gaps are filled with a 30 mm thick timber board to be provided and installed by the customer. At the edges, approach ramps can be attached using the same boards. The resulting surface can be driven on by heavy vehicles or used as storage space. This means the area needed for timber framing is only activated when required. All steel parts are galvanised. Cjdob Nrbnepfx Admshf Full assembly is carried out by the customer. After adjustment, the end stops must be pinned, otherwise they may be shifted by the force of the clamps. Packed in wooden crates, ready for EU shipping. Delivery free to your door within Germany. Made in Germany. For further technical data, please refer to the brochure.

Gamybos metai: 2016, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, HDPE film washing plant Year of manufacture: 2016 0 operating hours (never put into operation) Chsdpfxstuui Dj Admsf Manufacturer: NEUE HERBOLD, D-74889 Sinsheim comprising: Wet granulator, type SM 450/600-S5-2 Friction washer / friction separator, type FW 560/3000 Screw conveyor Separation tank (float-sink separation) type TB 500 Mechanical dryer, type TM 1005 Extraction unit, type MFT 55/500 Fine material separator, type HS 500 Electrical control panel

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing Cjdoqt Dmyjpfx Admshf - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Sąlyga: naujas, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtmotorleistung: 77,12 kW Motorleistung 1. Aggregat: 22 kW Motorleistung 2. Aggregat: 30 kW Chjdpsd H Sc Ejfx Admsf Motorleistung 3. Aggregat: 18,5 kW Schleifbandabmessung: 1330 x 2200 mm Betriebsdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportabmessungen: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Sąlyga: naujas, Gamybos metai: 2024, Hacker blades 40 x 40 concave Blades for Weima, Gross ... Cjdpfxsbxu Dhj Admehf Suitable for almost all common chippers/shredders Available from stock in Bitburg Subject to prior sale

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, HBS 840-44-E odciągacz kory, całkowicie wyremontowany, w stanie jak nowym Chedpfxoi E Tkwo Admof

Sąlyga: labai geros būklės (naudotas), KATALOGO NR. 6114 TECHNINIAI DUOMENYS - užkrovimo piltuvo įleidimo anga 800x1000mm - rotoriaus darbinis plotis 800mm - siurblio variklis 0,75kW - pagrindinis variklis 15kW - peilių kiekis 21 vnt - peilių matmenys 30x30mm - sietas 0,8x10mm - spaudimo stalčius - elektrinis autoreversas - iškrovimo sraigtai 2×1,1kW - matmenys ilgis/plotis/aukštis 2460x1800x2250mm - svoris 1660kg – vokiška gamyba – autoreversas – spaudimo stalčius Chjdpfxognzd Eo Admof – ne dažytas – labai gera būklė – naudotas smulkintuvas Grynasis kaina: 63 900 PLN Grynasis kaina: 15 200 eurų pagal kursą, 4,2 euro (Kainos gali keistis esant didesniems svyravimams)

Gamybos metai: 1998, Sąlyga: labai geros būklės (naudotas), NEUE HERBOLD Granulator Chodpfoh Rwc Ejx Admsf Universal Mill – Heavy-Duty Design - Year of manufacture: 1998 - Made of stainless steel - From technical center (machine was used exclusively for testing/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 knife rows

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 006211, Max. panel width: 4300 mm Max. panel length: 2200 mm Chodpfxjiwbfuj Admef Max. main saw blade projection: 135 mm Number of clamps: 10 Second flexible hold-down: yes Rotating station: yes

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, galia: 389,81 kW (529,99 AG), Mobilioji smulkinimo įranga DOPPSTADT AK 560 Eco Power Dyzelinis variklis: 530 AG Smulkaus smulkinimo krepšys (skylės pagal susitarimą) Codpfjw Rz Rqsx Admohf Galinė iškrovimo juosta su magnetiniu būgnu Twin drive (atskirai varomi grandiklio dugnui ir padavimo voleliui) Hidraulinė pavara (šliaužimo režimas) Nuotolinio valdymo pultas