Rexroth hidraulinis blokas

REXROTH 057-AHAG-G714-0-4-A

Būklė: labai geros būklės (naudotas), Offered is a used solids pump / wastewater pump. Manufacturer: SDAG Wismut-Aue. For further details, please refer to the photos. Dusdpfshwnfcsx Affjp

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. Dodjpugwijpfx Affsup The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Būklė: beveik kaip naujas (naudotas), “Hazemag Universa 1620” for sale Manufacturer: Hazemag Model: Universa 1620 Rotor size: 1,600 x 2,000 mm Feed opening: 2,500 x 2,000 mm Dujdpfxeggflvj Affep

Gamybos metai: 2000, būklė: labai geros būklės (naudotas), SMS MEER CNC-Doppelseitige Anfasmaschine Hersteller: SMS MEER Typ: RFA 14 Baujahr: 2000 Arbeitsbereich: Rohrdurchmesser Ø 21,3 – 114,3 mm Wandstärke: 2,3 – 11 mm Länge: 6–12 m Die Anlage besteht aus zwei RFA14-Anfasmaschinen mit Transportvorrichtungen zwischen den Maschinen. Die Aufgabe der Maschinen ist das Innen- und Außen-Anfasen beider Rohrenden. Djdpfeghrgusx Affsup Das Rohrbearbeitungsspektrum umfasst einen Durchmesserbereich von 21,3 bis 114,3 mm und eine Wandstärke von 2,3 bis 11 mm bei einer Rohrlänge von 6 bis 12 m. Die Fördertechnik im Bereich der Anfasmaschinen dient dazu, die Rohre vom Rollgang aufzunehmen und zwischen den Anfasmaschinen zu transportieren.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Naujas įrenginys, sandėlyje, pristatymas iš karto -Tūris 18000 l -Maksimali temperatūra 450°C -Vidinės matmenys (Ilgis x Plotis x Aukštis) 4100 x 2100 x 2100 mm -Išoriniai matmenys (ilgis su bėgiais) 9970 x plotis 3060 x aukštis (su pakeliamomis durimis) 6110 mm -Valdymo sistema Eurotherm Nanodac -Temperatūros stabilumas (esant vardinei temperatūrai be krovinio) ±5 °C -Automatinės oro įleidimo ir išleidimo sklendės Dujdpfeu Hma Nex Affop -Elektrinės pakeliamos durys -Elektriškai varomas važiuoklės vežimėlis -Galia 247 ± 9% kW -400 V, 50 Hz -Dokumentacija, CE deklaracija Galime pasiūlyti įrenginio montavimą, paleidimą bei Jūsų darbuotojų apmokymą. Kreipkitės į mus! Prekyboje turime naujų ir naudotų pramoninių krosnių. Apžiūrėti sandėlyje galima pagal susitarimą! Krosnis, krosnys, atkaitinimo krosnis, degimo krosnis, grūdinimo krosnis, šildymo krosnis, termiškai apdorojimo krosnis, džiovinimo krosnis, pramoninė krosnis.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, slėgis: 70 juosta, bendras aukštis: 1 600 mm, bendras plotis: 800 mm, bendras ilgis: 1 200 mm, temperatūra: 40 °C, darbinis slėgis: 70 juosta, triukšmo lygis: 80 dB, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, Approx. 15,000 L/Day Drinking Water Compact, fully automated reverse osmosis unit for producing hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, smaller industrial, and utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feedwater: Seawater with high conductivity, approx. 55,000 µS/cm (high salt content) Permeate quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery rate: Approx. 30% (typical operating range) at 55,000 µm/cm conductivity Design temperature: Approx. 25 °C (operating range approx. −2 to 35 °C) Process Technology & Construction - DT module with open feed channel – highly fouling-tolerant and fully cleanable - Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) - Typically no chemical feedwater pre-treatment required (no acid dosing) - Integrated flush and CIP function, PLC-controlled - Skid mounting on stainless steel frame (AISI 316) - High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic - Pump parts in contact with seawater made of corrosion-resistant materials Operation & Power Data Feedwater flow: Approx. 1,000 L/h (reference value) Operating pressure RO module: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, 1~ Connected load: Approx. 6 kW Control, Monitoring & Safety - Local operator panel with integrated PLC control - Monitoring of pressures, flows, conductivity, and operating hours Dodew Uf Ihepfx Affoup - Automatic shutdown including: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic diversion to drain) - Automatic “Stop & Rinse” function: Flushes seawater-contacted components with permeate during shutdown to minimize fouling during idle periods Dimensions & Weight (Skid) L × W × H: approx. 1,190 × 705 × 1,500 mm Weight: approx. 530 kg (dry), approx. 605 kg (in operation) Typical Applications - Ships, offshore platforms, ports - Island and coastal water supply - Hotels, resorts, smaller industrial and utility operations - Backup or peak load plant for existing drinking water production Further technical documentation, photos, as well as information regarding scope of delivery, pricing, and availability are available upon request.

Būklė: naujas, For sale: pipe straightening machine from the German manufacturer SMS MEER. The machine is brand new; it was dismantled from a facility that went bankrupt during the delivery and installation of the equipment. The machine is equipped with two Siemens drive motors, each rated at 200 kW. The straightening rollers have dimensions: length 460 mm, diameter at both ends 400 mm, diameter at the center 300 mm. Machine weight is 44 tons, total weight 55 tons. Additional photos taken before dismantling are available upon request for interested buyers. Duodpfx Afem H Unhjfop

Būklė: beveik kaip naujas (naudotas), Multistage, submersible, self-priming centrifugal pump Type: MTR 20-19/6 A-W-A-HQQV Product no.: A45937986 Djdpfx Ajfz D Dneffeup Dimensions: L 150 cm, W 30 cm, H 30 cm // approx. 102 kg

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. Dusdjtmqi Dspfx Affep The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Būklė: geras (naudotas), Hidraulinė pompa, alyvos pompa, krumpliaratinė pompa, menčių kameros pompa, hidraulinis agregatas, dviguba hidraulinė pompa Djdpsg Avqcofx Affeup -Dviguba hidraulinė pompa: iš liejimo mašinos KHS Krauss Maffei KM 1000-5000A -Pompa 1: Voith tipas IPH 6/5-125/50, 300 bar -Pompa 2: Voith tipas IPR/H 6/5-125/40, 210/300 bar -Pavaros variklis: Loher 75 kW, 1500 aps./min. -Atskiri komponentai: filtrai/vožtuvai žr. nuotraukas -Matmenys: 2285/800/H900 mm -Svoris: 1132 kg