Kranai

REMS A50

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1985, Parduodama Reishauer AG srieginių ir sraigtinių detalių šlifavimo staklės. Šlifavimo ilgis: 450 mm, spaudimo ilgis: 700 mm, maks. šlifavimo skersmuo: 200 mm, maks. žingsnis: 80 mm, maks. ruošinio svoris: 100 kg, maks. žingsnio kampas: +/-25°, šlifavimo disko skersmuo: 275 mm/350 mm, greitis: 1850 aps./min. Staklių matmenys X/Y/Z: apie 2600 mm/1800 mm/1600 mm, svoris: apie 3400 kg. Į komplektą įeina alyvos centrifuga, gaubtas, alyvos rūko nutraukėjas ir įvairūs priedai. Purškimo užuolaida šiek tiek sukietėjusi. Yra dokumentacija. Galima apžiūrėti vietoje. Podsx Dm Dnspfx Af Uopr

Būklė: naudotas, Thread rolling machine, cold rolling machine, thread roll machine, profile rolling machine Manufacturer: PEE-WEE Model: UPW 24 Serial no.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Pedeuz If Nopfx Af Uepr Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool mounting length/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor output: 3 kW Roll drive motor output: approx. 5.5 kW Mains connection: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed in 4 steps via gear shifting - Hydraulic unit integrated in machine bed - Operating manual with electrical schematic diagram Required space (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools have three sections – the lead-in, the calibration section, and the lead-out. Groove rolls have no pitch and are swiveled to match the lead angle of the profile to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and swivel angle results in the lead angle in the workpiece.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 30 000 mm, bendras aukštis: 4 300 mm, bendras plotis: 6 500 mm, ruošinio svoris (maks.): 100 kg, temperatūra: 220 °C, šildymo galia: 80 kW (108,77 AG), ruošinio aukštis (maks.): 1 200 mm, ruošinio ilgis (maks.): 2 500 mm, izoliacinė medžiaga: Mineralwolle 75 kg/m³, izoliacijos storis: 150 mm, ruošinio plotis (maks.): 800 mm, The continuous processing system consists of the following components: - Chemical pre-treatment by spraying Pedpfx Afeum Ufls Uopr - Dryer - Powder coating system - Powder curing oven - Conveyor technology (indexing mode) - Electrical control system

Būklė: naudotas, bendras ilgis: 1 800 mm, bendras plotis: 1 000 mm, bendras aukštis: 2 000 mm, Unladen weight: 2,000 kg Pedpjw Ryxmefx Af Ujpr Thickness: 45 mm Maximum pressure: 70 tons Punching and shearing machine Model: Hydraulic Manufacturer: GEKA Type: Hydracrop 70S Performance: 70 tons Round cutting: 45 mm Shear bar: 45 mm Sheet cutting: 450 x 15 mm Corner notching: 250 x 6 mm Includes multiple punches Machine dimensions: 1800 x 1000 x 2000 mm Machine weight: 2,000 kg - Documentation available: No - CE certificate available: No - Drive: Hydraulic - Punching force [t]: 70 - Notching width [mm]: 250 - Max. sheet thickness for notching [mm]: 6 - Round material cutting capacity [mm]: 45 - Cutting width [mm]: 450 - Max. sheet thickness for cutting [mm]: 15 - Transport dimensions: 1800 mm x 1000 mm x 2000 mm (L x W x H) - Transport weight [kg]: 2,000 kg Financial Information VAT: The quoted price is subject to VAT VAT/differential taxation: VAT deductible for business customers Delivery and trade-in possible at any time for all items in the industrial sector Lukas van Rossum

Gamybos metai: 1992, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 10-166, OFFER 13467 Technical Data: - Max. material thickness at 40 kg/mm² tensile strength approx. 3 mm - Roller journal diameter 45 mm Ppedohrm Iuopfx Af Usr - Manual hydraulic adjustment of the upper roller - Electric foot pedal - Drive 400 V / 1.1 kW - Required floor space approx. W 550 x H 1200 x D 1200 mm - Weight approx. 180 kg

Būklė: geras (naudotas), Presskracht 110 ton Buiglengte 3100 mm Bouwjaar 1990 + retrofit Staanderbreedte 2600 mm Psdpfx Aow Hx Rzsf Uopr Aangestuurde assen: Y1, Y2, X-as Besturingssysteem: ESA S630 Inclusief Wila kleminzet/spondeer (dichtdrukstempel)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit Suitable for many applications, especially in the photovoltaic and automotive industries. Loading unit: Horizontal loading magazine, model HLM 4-strand toothed belt conveyor 6 compartments, 285 mm wide, for accommodating profiles; maximum material height in line with saw cutting range; round material max. diameter 130 mm 3 glide strips between toothed belts as additional support, profile length min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA Saw blade diameter max. 500 mm Continuously variable speed control Hydro-pneumatic saw blade feed, continuously adjustable, from rear to front Siemens S7-300 control system with touchscreen Pjdpfx Afoxvbvvj Uopr Reversing device with 5-fold stroke up to max. 5,000 mm Electric material feed 3 - 1,000 mm (single stroke) Cutting width extension on both sides Pneumatic removal slide Waste flap after the saw for cutting remnants / offcuts Section length, profile-dependent from 8 mm Menzel minimum-quantity lubrication Clamping pressure regulation 2 extraction nozzles for dust extraction Unloading: Table surface 1,500 mm x 2,500 mm Pneumatic cross transfer slide

Būklė: naudotas, Gamybos metai: 1989, Saw blade diameter 320 mm Cutting diameter 140 mm Total power requirement 3 kW Machine weight approx. 0.5 t O F F E R Ppsdjw Dvivspfx Af Ujr We can offer you, subject to prior sale and errors excepted, non-binding, ex-stock: E I S E L E Circular saw machine for straight and mitre cuts Type VMS III-S-PV Year of manufacture 1989 _____ Max. saw blade Ø: 320 mm Cutting range: Tubes approx. Ø 130 mm Flat material 200 x 100 / 140 x 100 mm Solid material square 120 mm For mitre cuts, possibly reduced cutting sizes Up to max. 140 mm Saw carriage stroke, manual vertical approx. 200 mm Saw blade speeds 17–34 rpm Saw blade drive approx. 2 / 2.6 kW Total drive approx. 3 kW – 380 V – 50 Hz Weight approx. 500 kg Accessories / special equipment: • Saw head adjustable for mitre at 30 / 45 / 90° via scale • Pole-changing three-phase motor with max. 2.6 kW drive • Manual feed of saw carriage with long, adjustable lever • Manual workpiece vice, jaw width approx. 120 mm • Integrated coolant device with chip collection tray • Roller conveyor for material feed approx. 2,000 mm • 2 spare saw blades Condition: very good – ready for demonstration Delivery: ex-stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. We also have further larger EISELE cold circular saws and other (band/hacksaw/cold circular) saws in stock. Continuous stock of other sawing machines – please enquire.

Būklė: geras (naudotas), Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0783, Mitre Cold Circular Saw EISELE Model: VMS-III-S-PV Type No.: 430 Machine No.: 0783 Year of Manufacture: 1986 Cutting capacity at 90° (round): Ø 120 mm Cutting capacity at 90° (flat): 150 x 110 mm Cutting capacity at 45° (round): Ø 100 mm Cutting capacity at 45° (flat): 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cuts: 45° to the left, 90°, and steplessly up to 30° (60°) to the right Motor power: 2 and 2.6 kW Ppodpfst A Ar Sjx Af Ujr Power supply: 380 Volt, 50 Hz Equipment: - Semi-automatic vertical cold circular saw - Pneumatic quick-action material clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient mitre adjustment with fixed stops - Saw carriage on robust rectangular guideway - Comfortable and stepless lifting adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - With Eisele rotation compensation for long saw blade life - Easy saw blade change - High productivity with minimal space requirement (less than 1 m²) - Coolant system integrated in machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight: 460 kg The machine can be tested or demonstrated under power on site by arrangement. All information without guarantee. Subject to prior sale. This item is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller as well as for any injury to life, limb, or health.

Būklė: naudotas, TECHNICAL DATA - Screen Ø: 300 [mm] ACCESSORIES - 3 objectives (10x, 20x, 50x) - 2-axis display Pjdpfx Afeuhb Nlj Uepr