Apvalinimo staklės Haeusler VRM 3000x25mm 1994 m.

Haeusler VRM 3000x25mm

Būklė: naudotas, Gamybos metai: 2014, Drive power: 3 kW Operating pressure: 7 bar Air delivery (flow rate): up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Chicago Pneumatic CPVR15 CE screw compressor – Year of manufacture: 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications—this compressor reliably supplies the compressed air you need. Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Fedpfx Aheh A Sfdowsfw Application: workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigerant dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - oil-water separator Technical data taken from publicly available sources.

Būklė: geras (naudotas), Technical data: Working width: 4050 mm Maximum bending capacity: 6.0 mm Maximum prebending: 4.0 mm Top roll diameter: 210 mm Side lower roll diameter: 210 mm Central lower roll diameter: 210 mm Conical bending device by tilting both side rolls Hydraulic drop-end bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Net weight: approx. 14 tons The seller assumes no liability for typographical or data transmission errors. The machine's visual condition, technical state, and level of wear are consistent with its age; used machines are sold without any warranty. Fedswkaalspfx Ahwsfw

Gamybos metai: 2002, būklė: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam Ffedpehzbipefx Ahwew - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Gamybos metai: 2000, būklė: visiškai atnaujintas (naudotas), System for filling, cooling and sealing plastic suppository moulds. The line was completely overhauled both mechanically and electronically in 2019 and is in like-new condition. Before delivery, the system is tested with suppositories supplied by CP-Citopac GmbH. Ffjdpjfc I Haefx Ahwew For further technical details, please refer to the data sheet.

Būklė: naujas, Gamybos metai: 2025, volelio skersmuo: 140 mm, vėjo ilgis: 1 570 mm, - Capacity: 1570 x 4.5 mm - Electrically adjustable rear roll - Electrically adjustable bottom roll (material clamping) - Digital display for rear roll movement - Digital display for bottom roll movement (material clamping) - Hardened rolls - Conical rolling - Brake motor - Emergency stop - Documentation - 400V Ffodpfx Aogg Nv Iehwow

Būklė: geras (naudotas), Techniniai duomenys: Darbinis ilgis: 2050 mm maks. lenkimo pajėgumas: 18,0 mm Galutinis lenkimas: 12,0 mm Viršutinio volo skersmuo: 280 mm Apatinio volo skersmuo: 280 mm Kūginio lenkimo įrenginys hidraulinis atlenkiamas guolis Variklio galia: 7,5 kW Matmenys (Ilgis x Plotis x Aukštis): apie 3650 x 1550 x 1650 mm Ffjdpfxexruvzs Ahwjw Svoris: apie 7,5 tonos Pardavėjas neatsako už rašymo ar duomenų perdavimo klaidas. Mašina, išvaizda, technika ir nusidėvėjimas atitinka amžių; naudotos mašinos parduodamos be jokios garantijos.

Būklė: naujas, Gamybos metai: 2025, PROD-MASZ is a machinery manufacturer introducing an entirely new level of equipment quality. We take personal responsibility for every stage of the production process of our offerings, ensuring the highest standards and workmanship. Our extensive experience enables us to design durable, reliable, and easy-to-use machines. We place particular emphasis on functionality, operator comfort, and ergonomic design, ensuring our position as a market leader both domestically and internationally. Model: ZGR-3140/1.0 - Maximum working width: 3,140 mm - Bending capacity: up to 1.0 mm (steel sheet) - Bending angle: max. 145 degrees - Bending beam thickness: 20 mm - Cutting with rotary shear along the full working width - Upper beam can be lifted into three positions - Throat depth: 80 mm - Degree scale - Angle stop - Depth stops - Weight: approx. 560 kg - Rotary shear (max. cutting capacity up to 0.8 mm / steel sheet) + €350 - The machine complies with CE regulations and comes with a 12-month warranty. Delivery costs to Germany: €360.00 Delivery costs to Austria: €360.00 Delivery time: 2–4 days Cash on delivery accepted We look forward to hearing from you! Ffedpfocntnksx Ahwsw

Būklė: naudotas, rida: 10 500 km, galia: 220 kW (299,12 AG), pirmoji registracija: 07/2018, kuro tipas: dyzelinas, bendras svoris: 26 000 kg, spalva: geltonas, pavaros tipas: mechaninis, pakaba: kitas, sėdimų vietų skaičius: 1, veikimo valandos: 10 500 h, Įranga: ABS, kabina, oro kondicionavimas, priekabos jungtis, visų varančiųjų ratų pavara,

Gamybos metai: 1988, būklė: naudotas, Compressor unit type 178 A CD E Delivery rate: 4,760 l/min Operating pressure: 9 bar Power: 30 kW Fjdpfogw Dqpjx Ahwofw

Būklė: naujas, Hydraulic Punch and Shear Machine SAHINLER HKM 65 Exerted force: 65 Ton Motor power: 5.5 kW Dimensions: 1,700 x 900 x 1,670 mm (L x W x H) Weight: 1,600 kg PUNCHING: Punching capacity: Ø 2 mm x Thickness 20 mm Throat depth: 305 mm Punch stroke: 55 mm Working height: 1,030 mm SHEARING: Flat bars: 300 x 20 mm 375 x 15 mm Blade length: 380 mm Round bars: Ø 45 mm Square bars: 45 mm Angle profiles at 90°: 120 x 120 x 12 mm Angle profiles at 45°: 70 x 70 x 10 mm NOTCHING: Max thickness: Fjdoggbuhspfx Ahwefw 10 mm Width: 45 mm Depth: 90 mm Working height: 900 mm