Skydinis pjūklas FX250

Rema FX250

Būklė: naujas, KATALOGO NUMERIS RE041 - naujas įrenginys TECHNINIAI DUOMENYS - disko skersmuo ⌀250 – 350/30 mm - įpjovimo disko skersmuo (veikia tik su ⌀300, 350 mm disku) ⌀120/20 mm - pagrindinio variklio galia 4 kW - įpjovimo variklio galia 0,75 kW - apsisukimų skaičius 4000 aps./min - įpjovimo apsisukimų skaičius 8800 aps./min - disko posvyris 0 – 45° - maksimali pjovimo ilgis 2000 mm - pjovimo plotis ties išilginiu liniuotė 1250 mm - peilis ⌀350 mm - veleno flanšo skersmuo 87,5 mm - stalo atmuša nustatyta kampui 90° – 45°, tikslumas ±1° - maksimali pjovimo aukštis su ⌀300 mm disku: 95 mm Cedszr Ix Nopfx Akksrf - maksimali pjovimo aukštis su ⌀350 mm disku: 120 mm - viršutinės nutraukimo jungties skersmuo ⌀80 mm - apatinės nutraukimo jungties skersmuo ⌀100 mm - svoris 620 kg - sulankstyto įrenginio matmenys ilgis/plotis/aukštis 2255x3460x1450mm Grynasis kaina: 19 900 PLN Grynasis kaina: 4 740 EUR Kaina apskaičiuota pagal kursą 4,2 PLN/EUR (didesnių kursų svyravimų atveju kaina gali keistis)

Būklė: labai geros būklės (naudotas), Four-sided planer Weinig Csdpfx Ajrigxyokksrf - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition

Būklė: naujas, KATALOGO NR. RE060 - nauja mašina TECHNINIAI DUOMENYS - disko skersmuo ⌀250 – 350/30 mm - įpjovimo disko skersmuo (veikia tik su ⌀300, 350 mm diskais) ⌀120/20 mm - pagrindinio variklio galia 4 kW - įpjovimo variklio galia 0,75 kW - sūkių dažnis 4000 aps./min. - įpjovimo sūkių dažnis 8800 aps./min. - disko pasvyrimas 0 – 45° - maksimali pjovimo ilgis 1600 mm - pjovimo plotis su išilginiu liniuotė 1250 mm - peilis ⌀350 mm - veleno flanšo skersmuo 87,5 mm - stalo atraminis liniuotė nuo 90° iki 45°, tikslumas ±1° - maksimali pjovimo aukštis su ⌀300 mm disku: 95 mm - maksimali pjovimo aukštis su ⌀350 mm disku: 120 mm - viršutinio ištraukimo jungties skersmuo ⌀80 mm Csdpfjzrk N Rsx Akkorf - apatinio ištraukimo jungties skersmuo ⌀100 mm - svoris 480 kg - surinktos mašinos matmenys 2020x3380x1200 mm Grynoji kaina: 16 000 PLN Grynoji kaina: 3 800 EUR Kaina pagal kursą 4,2 PLN/EUR (esant didesniems kurso svyravimams, kaina gali keistis)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced milling unit anchored to the worktable Especially sturdy design Smooth operation due to precision assemblies and high own weight Standard with forward/reverse rotation and electronic interlock during direction change 5 speeds from 3000 to 10000 rpm Speed adjustment is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large cast iron worktable for lasting precision Easy handling thanks to controls and speed indicator on the machine front Milling fence with fine adjustment and aluminium fence jaws as standard High-performance industrial motors Equipment details: Milling fence Milling fence adjustable with crank/handwheel from the front panel With digital readout Quick-change spindle MK 4 quick-change spindle system standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved milling guard Forward/reverse spindle rotation MK 4 quick-change spindle Milling fence adjustable with crank/handwheel from the front panel with digital readout Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data Worktable dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length Ø 30-35 mm: 140 mm Usable spindle length Ø 40-50 mm: 180 mm Credpfx Aodqzcxskkof Spindle stroke: 90 mm Max. tool diameter for profiling: 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle diameter at fence: 1 x 120 mm Extraction nozzle diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Available immediately -

Būklė: naujas, Gamybos metai: 2026, A550 Pilarka Do Drewna Litego, W pełni Automatyczna, 9 m W pełni automatyczne cięcie drewna średniej i dużej wielkości dzięki prostemu w obsłudze systemowi automatyzacji. Umieść dowolny element drewna, a maszyna automatycznie wykryje go i przytnie zgodnie ze zleconymi wymiarami, z użyciem napędu serwo zapewniającego precyzyjne pozycjonowanie materiału. Import list zleceń poprzez WIFI usprawnia szybkie wprowadzanie dużych zleceń cięć z plików Excel. Opcjonalnie pilarka A550 może być wyposażona w funkcję optymalizera. Każdy kawałek drewna, który zostanie położony na podajniku, niezależnie od jego długości, jest automatycznie mierzony przez czujnik laserowy. Zaawansowany algorytm optymalizujący analizuje listę cięć i wyznacza najlepszy porządek wycinania elementów, tak aby maksymalnie ograniczyć odpady. Wszystko to odbywa się w czasie rzeczywistym, podczas pracy maszyny, bez dodatkowych działań operatora. • W pełni automatyczna praca – automatyczne podawanie drewna i cięcie na zadane długości. • Intuicyjny interfejs użytkownika; szybkie wprowadzanie zleceń i rozpoczęcie cięcia. • Obsługa prostych elementów, całych partii oraz dużych list cięć z plików Excel. • Możliwość cięcia i zliczania kilku sztang/bel jednocześnie. • Zdalne wprowadzanie zleceń (Excel) przez WIFI z rozbudowanymi opcjami mapowania danych. • Regulowana prędkość podawania drewna i cięcia dla maksymalnej wydajności procesu. • Automatyczny druk etykiet dla elementów na podstawie danych ze zlecenia (naklejanie ręczne, opcjonalnie). • Bezpośredni druk na materiale w linii produkcyjnej, bez udziału operatora (opcja). • Obsługa kodów kreskowych/QR do wprowadzania zleceń lub ich drukowania (opcja). • Automatyczne ustawianie kąta cięcia piły w zakresie ±75° za pomocą serwomechanizmu (opcja). Idealna do zastosowań: • Produkcja konstrukcji ramowych i dachowych • Produkcja domków i schowków ogrodowych • Produkcja mebli z litego drewna • Produkcja elementów ciesielskich z cięciem pod kątem • Cięcie dużych ilości drewna Model: A550 Długość całkowita: 9 m Długość obrabianego materiału: 8580 mm Wydajność załadunku/popychania: 20 – 40 kg Oprogramowanie: Optymalizator Csdpfsf Ekngsx Akkerf AUSTRALIJSKIE MASZYNY NAJWYŻSZEJ JAKOŚCI.

Būklė: naujas, Gamybos metai: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine tilts via handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta switch Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to one side to approx. 25° for sharp angles, and tilted flat to the left up to 30° Machine weight: approx. 250 kg Crsdpfoi Dfidjx Akkjf Location: Ex stock 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with forward and reverse rotation Large, cast-iron milling unit mounted directly to the table Under-table extraction hood for improved dust extraction Solid and precise cast iron table Fast and straightforward speed change Powerful 5.0 kW motor Standard curved milling guard Quality made in Italy Equipment Details Cast iron milling unit Directly mounted onto the milling table Milling spindle mounted with high-precision ball bearings in the upper position for minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful Motors Equipped with a high-performance three-phase motor Milling Guard The standard milling guard is supplied as standard for maximum safety, featuring a height-adjustable fence and protective cover. Crjdpfshp Rcrox Akkjf Milling Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw The integrated extraction port ensures an unobstructed view Milling Table Opening A large table opening allows the use of larger panel cutters, tenoning, and slotting tools above and below the table Curved Milling Guard Included as standard Reversible Fence Jaws Versatile, integrated fence to bridge the tool gap enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and Weight Weight (net) approx. 240 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation Information Required length: 1,945 mm Machine body width/depth: 575 mm Required width/depth: 920 mm Working area length: 1,600 mm Explanation required space: The dimensions take into account the maximum travel distances or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Explanation working area: Please add the specified dimensions to the required space to calculate the recommended free setup area for the machine. Electrical Data Supply voltage: 400 V Drive motor power: 5.0 kW Mains frequency: 50 Hz Milling Spindle Usable spindle length: 100 mm Spindle speeds: 3,500/7,000/10,000 rpm Max. spindle protrusion above table: 130 mm Spindle shaft diameter: 30 mm Max. milling tool diameter Max. sinkable tool diameter: 180 mm SCOPE OF DELIVERY Curved milling guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Būklė: naujas, Gamybos metai: 2024, Surface Planer Martin T 54 Only with a high-quality surface planer can you truly achieve perfect foundations. The T 54 was developed with precisely this aim in mind. It enables you to dress workpieces easily at the most modern level and safely machine them with four-sided edges. The machine comes standard with a TERSA all-steel cutterblock. The Xplane cutterblock with a pulling cut is available as an optional extra. Chamfering is effortless thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The solid cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require more support area, both the infeed and outfeed tables can each be extended by 380 mm – of course, these extensions are also made of cast iron. Technical data: Table width: 500 mm Table length: 2840 mm Max. cutting depth: 8 mm Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorised table adjustment Equipment: T 54 T 5462-a Suvamatic Crsdpfx Akopgkmwokef T 541-a Tersa cutterblock 4 knives Location: In stock at 54634 Bitburg - Available immediately -

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, minimax ti 55es LL – Spindle Moulder Image shows T 55 i elite s standard version Professional workshop machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting. Codpfx Akodqzh Rsksrf Robust steel and cast iron construction. Large-dimension grey cast iron milling unit, tiltable up to -45° to the rear. Spindle speeds displayed via LEDs. Quick and easy speed change via eccentric clamping. Reversible direction of rotation (right/left). Height and tilt display accurate to 1/10 mm. Heavy-duty industrial fence: with rack-and-pinion fine adjustment, digital display, aluminium fence jaws, 3-position repeat setting for quick adjustment. Scope of delivery: Aluminium fence jaws Curved milling protection hood Table extensions left and right Model: minimax ti 55es LL Article No.: 5502252 Technical data: Worktable dimensions: 2500 x 655 mm Sliding table dimensions: — Usable spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilting range: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400V / 50 Hz / S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Crjdpfxoqlckpo Akkof Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -