Šlifavimo mašina

REISHAUER DS

Sąlyga: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 10 000 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 105 mm, tekėjimo skersmuo: 610 mm, veleno greitis (maks.): 3 500 aps./min, veleno skylė: 70 mm, X ašies eiga: 580 mm, Y ašies eiga: 210 mm, Z ašies eigos atstumas: 1 137 mm, tvirtinimo skersmuo: 63 mm, sukimosi greitis (maks.): 6 000 aps./min, įvesties srovės tipas: Oro kondicionierius, Įranga: sūkių greitis be galo kintamas, The machine is in good condition. Major maintenance work in recent years: 30.04.2020 Milling spindle overhaul CHF 35,000 16.07.2021 Software update (Wenk AG) CHF 1,600 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: ·Error message at startup ·Coolant for internal cooling flows out at the rear side of the milling spindle ·Overload message when the machine is cold and rapid traverse is at 100% ·Over 150 various tool holders ·Spare bushings for the tool magazine ·Spare limit switches for the tool changer position monitoring ·2 pieces 3-jaw chuck, diameter 250 mm (mounted during inspection) ·1 piece 3-jaw chuck, diameter 250 mm ·1 piece 3-jaw chuck, diameter 300 mm ·1 piece 4-jaw chuck, diameter 400 mm ·2 sets hard jaws for external clamping, short version ·1 set hard jaws for external clamping, long version ·Various sets of soft jaws, used ·Replacement filters for the Kowap high-pressure unit (5 pieces in stock, approx. 2 pieces by delivery – 1 filter approx. 20-25 CHF) ·Coolant purification system or oil separator (custom-made) ·Cabinet suitable for the tool magazine, adapted for KM63 holders and numbered with 80 slots ·Specific clamping accessories suitable for KM63 holders, which allow direct clamping of indexable inserts ·Iscar side milling cutter suitable for one holder, D160mm, width 4mm ·Gear cutter suitable for one holder (custom-made – for soft jaws p=1.5mm) ·Cleaning/deburring brush suitable for one holder Hsdpfexp Hmasx Af Iofb We can also provide you with leasing and financing offers for the machine. An inspection appointment can be arranged upon request.

Sąlyga: labai geros būklės (naudotas), Neu 2008 Hfjdpfx Afjrfx Tnj Ijb Umlaufdurchmesser über Bett – 600 mm (Ø 23,62 Zoll) Drehdurchmesser × Bearbeitungslänge – Ø 300 × 600 mm (Ø 11,81 × 23,62 Zoll) Max. Drehdurchmesser – Ø 380 mm (Ø 14,96 Zoll) Max. Verfahrweg Z-/X-Achse – 600 / 240 mm (23,62 / 9,44 Zoll) Z-Achse: FANUC 2,8 kW (4 PS) / 3.000 U/min X-Achse: FANUC 2,8 kW (4 PS) / 3.000 U/min Spindelbohrung / Zugrohrdurchmesser – Standard: Ø 77 / Ø 52 mm (Ø 3,03 / Ø 2,04 Zoll); Option: Ø 86 / Ø 77 mm (Ø 3,38 / Ø 3,03 Zoll) Spindeldrehzahl – Standard: 8" Spannfutter 3.500 U/min; Option: 8" Spannfutter 4.500 U/min, 10" Spannfutter 3.500 U/min Spannfutter-Durchmesser – Standard: Ø 8"; Option: Ø 10" Hydraulischer Reitstock – Hub 465 mm (18,3 Zoll), MK 4 VDI-Werkzeugstationen – Option: 8, Standard: 10 Kühlschmierstoffanlage Späneförderer Anschlusswert – 208–220 Volt / 100 Ampere / 3 Phasen / 60 Hz Stellfläche (L × B × H) – 4.080 × 1.675 × 1.842 mm (160,62 × 65,94 × 72,51 Zoll) Gesamtgewicht (ca.) – 5.200 kg (11.440 lbs)

Gamybos metai: 1978, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Tensile force: 6.3 t Broaching speeds: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Hfedoiw Dlkopfx Af Ieb Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special features: - Coolant / lubricant unit - Without automatic tool feeder - Oil and chip tray (approx. 2,000 mm) Note: The machine is ideal for machining keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Gamybos metai: 1985, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 04.2187, Hydraulic Internal Broaching Machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985, overhauled Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Pulling force: 10,000 kg at 3 m/min Broaching speeds: hydraulically infinitely variable from 1 m/min to 7 m/min Return stroke speed: hydraulically infinitely variable from 7 m/min to 30 m/min Maximum stroke: 1200 mm Broaching tool clamping: universal pull head for flat shanks up to 26 mm width Maximum workpiece diameter: Ø max. 480 mm (limited by oil and chip tray) Hfodjixntwopfx Af Iob Table aperture: Ø 70 mm Power supply: 380 Volt / 50 Hz / 5 kW

Gamybos metai: 1992, Sąlyga: naudotas, Plate heat exchanger for milk processing Hedpfx Afoh Eulgo Iefb

Sąlyga: naudotas, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Spindle taper internal MK 4 Table diameter 160 mm Table bore diameter 75 mm Strokes per minute 355 – 630 Hfsdpfxsu Uu S Ts Af Iob Feed range 0.008 – 0.4 mm/stroke Space requirements approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg Year of manufacture: approx. 1970 Hydraulic clamping on table Change gears

Gamybos metai: 1985, Sąlyga: naudotas, Workpiece diameter: 25–90 mm Thread length: 3,000 mm Thread pitch: 2–16 mm Total power requirement: 25 kW Machine weight approx.: 10.5 t Space requirement approx.: m O F F E R We can offer you the following, subject to prior sale and errors excepted, ex stock without obligation. WALDRICH COBURG Whirling machine / peeling machine for the production of threads, worms, ball screws or similar components Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 – 90 mm Max. thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Pitch angle max. up to Ø 55 mm: 15° Pitch angle max. descending up to Ø 90 mm: 8° Whirling head speed, stepless: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore diameter of clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive approx.: 25 kW – 380 V – 50 Hz Weight: approx. 10,500 kg Accessories / special features: • Robust whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests, integrated with prism guides. Manual thread depth adjustment and optical pitch angle setting on the support. • Powered tool head, normally equipped with 4 tools: 2 roughing tools, 1 flank tool, 1 deburring tool. • Workpiece speeds and pitch feed are finely adjustable using change gears. Separate rapid traverse for resetting the whirling slide. • Simple indexing unit for whirling multi-start threads. Hjdpfx Ajtzdyzef Iefb • Additional setup for whirling threads longer than the centre distance with intermediate support. • For correcting lead-screw errors, thermal expansion of the workpiece, or errors during additional setups, the machine is equipped with a compensation device. This enables both an electronically programmed compensation of the lead-screw as well as workpiece-specific linear compensation using a wedge system. • Motorized tailstock adjustment with automatic stop by contact pressure sensor. • Comprehensive accessories including cutting tools, toolholders, collets, accessory parts, setting devices, gauges, and operating tools. • Central lubrication, coolant system, separate control cabinet, operating manuals. The machine is suitable for roughing and finishing of single and multi-start right- and left-hand threads, worms, ball screws or similar workpieces!

Sąlyga: geras (naudotas), Gamybos metai: 2012,

Sąlyga: labai geros būklės (naudotas), Wheel diameter - max. 300 / 400 mm Wheel width 76 mm Hfsdpfx Afeuwwlqo Ijb Module - max. 6 Module - min. 0.5 Control system BWO CNC 921 Stroke position adjustment 94 mm/stroke Stroke 82 mm Stroke rate 75 - 1000 strokes/min Number of teeth 5 - 200 Cutter head arbor SK 45 Table diameter 400 mm Total power requirement 50 kW Machine weight approx. 7.5 t Space requirement approx. 5.0 x 3.8 x 3.4 m Machine in very good condition!

Gamybos metai: 1994, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of Manufacture: completely overhauled by the manufacturer in 1994 Hedjgyd T Eopfx Af Ijfb Weight: 3,700 kg Pulling Force: 10,000 kg (100 kN) Maximum Stroke: 1,500 mm Maximum Workpiece Diameter: Ø 500 mm Broaching Speeds: infinitely variable from 1 m/min to 6 m/min Return Speed: infinitely variable up to 20 m/min Power Supply: 400V / 50Hz