Automatinis pjovimo įrenginys

Reinhardt BRG 520/250

Sąlyga: naudotas, Gamybos metai: 2000, Technical details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Itedpfx Afsu Ixwie Iob Turning length: 610 mm Cross travel (X-axis): 160 mm Longitudinal travel (Z-axis): 610 mm CNC control: Siemens 810D Spindle speed: 1 – 6300 rpm, stepless Spindle torque: 86 Nm Spindle bore: Ø 42 mm Spindle nose diameter at front bearing: Ø 80 mm Feed drive AC: X/Z: 5000 / 7000 N Rapid traverse X/Z: 16 / 20 m/min Tool turret – number of stations: 12 / VDI 30 Tailstock quill taper: MK4 Tailstock stroke: 500 mm (travel) Main spindle power: 7.5 kW (100% duty cycle = 11 kW) Electrical configuration – voltage/frequency: 3/PE ~ 400V and 50/60Hz Total power requirement: 20 kVA (11 kW) Machine weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 2.1 m The CNC lathe is equipped with a C-axis. Distance main spindle – tailstock: 805 mm Hydraulic power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Tool turret (12 positions available for driven tools) Currently, 8 tool holders are installed in the magazine, 4 of which are collet holders Coolant system, coolant supply through turret Control cabinet with cooling, Rittal Type SK3393100 Workpiece collection tray Machine lighting Accessories: 1x driven tool as per description.

Sąlyga: naudotas, Various tool holders from Mazak, Sandvik, Mimatic, Gerardi, EWS, Nikken, and others. Itedpfxsvry T No Af Isb Turning and milling tools with VDI 40 shank. Available only by pallet. Pallet 5: EUR 2,730 total 3x driven tool VDI 40 at EUR 580/each 11x tool holder VDI 40 at EUR 90/each Pallet 6: EUR 2,640 total 3x driven tool VDI 40 at EUR 580/each 10x tool holder VDI 40 at EUR 90/each Pallet 7: EUR 2,640 total 3x driven tool VDI 40 at EUR 580/each 10x tool holder VDI 40 at EUR 90/each Pallet 8: EUR 2,730 total 3x driven tool VDI 40 at EUR 580/each 11x tool holder VDI 40 at EUR 90/each

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, CNC apdirbimo centras Wagner WMC 1800 (2013) Gamintojas: Wagner Tipas: WMC 1800 Pagaminimo metai: 2013 Siemens 828 valdymas Būklė: gera, naudota, eksploatuojama X eiga: 1800 mm Y eiga: 900 mm Z eiga: 700 mm Itjdpfow S Hrvsx Af Ijb Įrankio laikiklis: SK40 Vidinis aušinimas (IKZ) 25 bar su juostiniu filtru Įrankių matavimas Rankinis ratukas Be įrankių

Sąlyga: naudotas, Įvairūs įrankių laikikliai iš Mazak, Sandvik, Mimatic, Gerardi, EWS, Nikken ir kitų. Tekinimo ir frezavimo įrankiai su VDI 40 tvirtinimu. Parduodama tik pilnomis paletėmis. Itodpfxjvpvmtj Af Ijb 1 paletė – 3 220 eurų 4 vnt. varomų įrankių VDI 40 po 580 eur/vnt. 10 vnt. įrankių laikiklių VDI 40 po 90 eur/vnt. 2 paletė – 3 130 eurų 4 vnt. varomų įrankių VDI 40 po 580 eur/vnt. (1 vnt. naujas) 9 vnt. įrankių laikiklių VDI 40 po 90 eur/vnt. 3 paletė – parduota 4 paletė – parduota

Sąlyga: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 163341, Country of origin: UK Voltage: 400V 3-phase AC 50/60Hz max 58A Dimensions: 200 x 260 x 250 cm Net machine weight: 5010 kg TECHNICAL SPECIFICATIONS Capacities Table dimensions: length 900 mm / depth 410 mm X-axis travel: 560 mm Y-axis travel: 410 mm Z-axis travel: 510 mm Distance spindle nose to table surface: min 150 mm, max 660 mm Distance spindle center to column: 540 mm Maximum table load: 500 kg Spindle Speed: 40 – 12,000 rpm Power (5 min): 18.5 kW Power (10 min): 15 kW Power (30 min): 10 kW Continuous power: 7.5 kW Feed rates Rapid traverse: 36,000 mm/min Cutting feed rate: 1 to 8,000 mm/min Table Dimensions: 900 x 410 mm T-slot size (ISO R299): 18 mm / Number: 3 / Spacing: 125 mm Permissible load: 500 kg Distance floor to tabletop: 780 mm ATC Tool Magazine Number of tools: 30 pcs Tool selection: random access; automatic bi-directional search Tool holder: MAS BT-40 Max tool diameter in magazine: Ø 80 mm (without adjacent tool: Ø 125 mm) Max tool weight: 8 kg Maximum magazine load: 120 kg Max tool length: 350 mm Tool change time: 2.9 sec (chip-to-chip) Itodpfx Afjw T Tp Rj Iob Lubricant reservoir: 1.8 L Axis lubrication reservoir: 260 cm³ Spindle coolant tank: 16 L Hydraulic pressure tank: 460 cm³ Coolant reservoir: 200 L Compressed air: 0.5 to 0.9 bar Capacity: 200 L/min All technical data is supplied subject to possible error or omission and is provided without guarantee.

Sąlyga: naudotas, Gamybos metai: 2006, x-axis travel: 1050 mm y-axis travel: 510 mm z-axis travel: 510 mm Control: Fusion 640 M Nexus Spindle taper: DIN 69871/SK40 Feed rate: 8000 mm/min Spindle speed range: 35 - 12,000 rpm Rapid traverse (x/y/z): 36 m/min Spindle-to-table distance max.: 660 mm Spindle-to-table distance min.: 150 mm Number of tools in magazine: 30 Tool holder: CAT 40 Tool diameter: 80 mm Tool diameter with 2 empty stations max.: 125 mm Max. tool weight: 8 kg Max. tool length: 350 mm Table length: 1300 mm Table width: 550 mm Number of T-slots: 3 T-slot width: 18 mm T-slot pitch: 100 mm Max. table load: 1200 kg Table height above floor: 850 mm Coolant tank capacity: 250 l Coolant pump: 4.5 bar Internal coolant supply: 15 bar Flow rate: 271 l/min Required compressed air: 700 l/min Spindle motor: 18.5 kW Connection voltage: 400 V Connected load: 36.6 kVA Frequency: 50 Hz Required pneumatic pressure min.: 5 bar (at 200 l/min) Machine weight approx.: 6.9 t Space requirements (L x W x H): approx. 2.90 x 2.84 x 2.81 m Including special accessories: - Through-spindle coolant (15 bar) - Chip conveyor, hinged belt, left side - Torque-dependent drilling cycle (Mazatrol) - Automatic determination of drilling depth increments by torque sensing (ideally for use with HSS tools) - Interface set contents: - Keyboard interface - Mouse interface - Printer interface Note: Retrofitting is not possible - CNC Options Package Performance Package contents: - Shared Variables (600 pairs) - MAZAK Thread Cutting Tornado (EIA/ISO) - Synchronous thread cutting - EIA/ISO input function - EIA/ISO special functions: Ijdjxp Rywspfx Af Ietb Spiral interpolation (G02.1, G03.1) 3D tool offset correction (G40-G42) Scaling (G50, G51), etc. - EIA/ISO Constant feed rate (G93): Using this function keeps the feed rate constant along straight and curved contour combinations. - EIA/ISO Tool length measurement (G37) - EIA/ISO Program unit stop function: The program will automatically stop at a specified program unit. - MAZACC-2D (Mazatrol & EIA/ISO): Precision control function for accurate vector interpolation and optimal acceleration/deceleration at edges and radii, allowing improved 2D contour accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48), 48 pairs - Spiral machining function (G33) for boring head operations (e.g. with d'Andrea tool) - Used machine, sold without warranty - - All dimensions, weights and performance specifications are non-binding -

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Machine type: - Kondia B640 - Year of manufacture: 2004 Control system: - Heidenhain iTNC 530 - Electronic handwheel Tool measurement: Itjdpfx Aew H N R Eef Iob - Tool Eye - 3D measuring probe Tool changer: - 22 magazine slots Travels: - X - 600 mm, Y - 400 mm, Z - 510 mm Main spindle: - Max. 12,000 rpm (new main spindle 2020) - Tool holder: BT 40 Table: - Clamping area: 800 x 400 mm Coolant system: - Internal coolant supply (IKZ) 20 bar - External coolant supply - Spindle cooling Accessories: - Chip conveyor - Various tool holders - Various clamping studs - Machine documentation Availability: - Immediately

Sąlyga: naudotas, Gamybos metai: 1985, Drilling capacity in steel (diameter): 30 mm X-travel: 850 mm Y-travel: 435 mm Control: HEIDENHAIN TNC 150 Total power requirement: 16 kW Machine weight approx.: 3,500 kg Space requirement approx.: ___ m F.E.H.L.M.A.N.N (Switzerland) CNC-controlled precision drilling and milling machine Model: PICOMAX 100 CNC – 2+ Am Year of manufacture: 1985 Serial no.: 16 085109 X-axis (longitudinal): 850 mm Y-axis (transversal): 435 mm Itsdpfxst Hxa Hs Af Ijb Z-axis (vertical): 210 mm Table size: 500 x 1,570 / 390 x 1,280 mm Min./max. distance from vertical spindle to table surface: 140 / 690 mm Vertical and motorised adjustment travel of drilling head: 540 mm Drill spindle overhang approx.: 450 mm Spindle taper: SF 32 Drilling capacity in steel: 30 mm Maximum spindle stroke (quill, vertical): 210 mm Spindle speeds (stepless, 2 ranges): 25 – 5,600 rpm Workpiece weight: 600 kg Feed rates XYZ: 1 – 8,000 mm/min. Drilling feeds, 6 automatic options: 0.03/0.07 to 0.4 mm/min. Rapid traverse XYZ: 4/8 m/min. Spindle drive power: 6 kW Total drive power approx.: 16 kW – 380 V – 50 Hz Weight approx.: 3,500 kg Accessories / Special equipment: • HEIDENHAIN CNC – 2-axis path control, type TNC 150, with color monitor, graphics, all standard subroutines and cycles, thread cutting cycles, manual control device or electronic handwheel, RS 232 interface, etc. The drilling spindle axis (Z) can be activated manually or via CNC control. • Drilling depth can be preset using a 12-position turret stop, displayed digitally on the monitor. • Drilling head can be programmed via height positioning device to 3 preset positions. • Precision coordinate table for X/Y CNC axes with hardened ballscrew spindles. • With quick-change tool system and various tool holders, various drill chucks, coolant system, etc. Condition: Good to very good – demonstration ready under power Delivery: Ex stock – as inspected Payment: Net – due on receipt of invoice.

Gamybos metai: 2019, Sąlyga: naujas, Deublin rotary union (drum) for Suprasetter. We have all spare parts for Heidelberg Suprasetter in stock, both new and used. Iedpfx Ajfbngdof Ietb

Sąlyga: geras (naudotas), Großes Sortiment an Werkzeugaufnahmen und weiterem Zubehör. Iodpfx Aewfg Dtjf Iotb