Pneumatinis vienastulpis presas, suslėgto oro presas, pneumatinė skylamušė, pneumatinis presas

RECTUS - FRIEDMANN & MAIER K3000 / 50 / 6A

Būklė: naujas, Gamybos metai: 2025, 2-roll driven profile roller Hydraulically adjustable upper roller Shaft diameter: 40 mm Roller diameter: 152–162 mm Rotational speed: 8.5 rpm Upper roller adjustment: 120 mm Capacity chart: see attachment Klodpfehgiuhex Aauer Machine available in various configurations: Manual adjustment, 3-roll drive, etc.

Būklė: naujas, Pressure 8.5 kN Stroke 40 mm Throat depth 95 mm Working height from/to 95 - 240 mm Table size 160 x 110 mm Spindle diameter 25 mm Machine weight approx. 27 kg Dimensions (L x W x H) 160 x 230 mm Direct-acting pneumatic presses deliver full pressing force across the entire stroke length. They are primarily used when long-stroke parts need to be processed with constant force. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinders with end-of-stroke cushioning on both sides • Double guide rings in the piston for smooth and steady operation • Oil-resistant sealing elements Special features of the PND series Ksdpfx Aajfv Awaeuolr • Spindle secured against twisting • Spindle return on the PND 85/S only via one cylinder chamber—resulting in additional air savings • Working height fine adjustment is straightforward, fast, and precise in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limit ring on the piston rod Additional advantage: Faster cycle time and air savings

Gamybos metai: 1998, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 0159488169537, Offer 23293 Technical Data: - Pressing force: 300 kN - Punching capacity, e.g.: up to 30 mm Ø in steel: 9 mm - or with special punching device: up to 100 mm Ø in steel: 2.5 mm - Stroke, infinitely adjustable: 0 to 28 mm - Strokes per minute: 26 to 36 1/min - Throat depth: 610 mm - Installation height: 240 mm - Drive: 400 V / 4 kW - Space requirement approx.: W 750 x H 1650 x D 1350 mm - Weight approx.: 1300 kg Kljdpepuy H Djfx Aausr - with: - Foot switch - Center punch locating device - Support table with folding stops, W 1100 x D 850 mm - Stop adjustment paths from center of punch - Width between left and right approx. 470 mm x D 510 mm

Būklė: paruoštas naudoti (naudotas), Rumuniška kaldinimo kūjis CM 2500 (kūjis panašus į Huta Zygmunt MPM 6300B): - Maksimali smūgio energija prie maksimalios eigos – 7000 kgm; - Smūginės galvos svoris – 2500 kg; - Darbo režimas: pneumatinis; - Smūginės galvos eiga – 850 mm; - Smūgių per minutę skaičius – 100; - Darbinis slėgis – 5–7 bar; - Priekalo svoris – 48 t; - Bendras svoris – 65 t. Rumuniška kaldinimo kūjis CM 1250 (kūjis panašus į Huta Zygmunt MPM 3150B): - Maksimali smūgio energija prie maksimalios eigos – 3600 kgm; - Smūginės galvos svoris – 1250 kg; - Darbo režimas: pneumatinis; - Darbo stalo dydis (iš priekio į galą) – 700 mm; - Eiga – 800 mm; - Smūgių per minutę skaičius – 110; Kjdpfx Ajw Sdxajauelr - Darbinis slėgis – 5–7 bar; - Didžiausias viršutinės matricos svoris – 400 kg; - Matricos aukštis – 220 mm; - Smūginė galva (iš priekio į galą) – 500 mm; - Oro sąnaudos – 15 m³/min; - Priekalo svoris – 24 t; - Mašinos aukštis virš grindų – 3750 mm; - Bendras mašinos aukštis – 4380 mm; - Bendras svoris – 35 t.

Būklė: naujas, HR300 Rogi Mini-Profile Bending Rolls Rolling Capacity ----- 1 mm Working Length ----- 300 mm Roller Diameter ----- 30 mm Kledpoga Tzbofx Aausr Weight ----- 10 kg

Būklė: geras (naudotas), Raktutinės atvirosios ir žiedinės raktos - Atvirosios/žiedinės raktos: įvairūs dydžiai, su transportavimo dėže - Įrankių svoris: apie 400 kg - Gamintojas: įvairūs žinomų gamintojų ženklai, žr. nuotraukas - Parduodama/kaina: tik viskas kartu - Transportavimo dėžės matmenys: 1200/810/H350 mm - Bendras svoris: 466 kg Kledpfx Aaex Swareuor

Būklė: naujas, Tubend Hydraulic Profile Ring Bending Machine HPK 50 3 driven rollers Digital display Incl. standard roller set for steel Hydraulic / Motorized ring bending machine Usable horizontally and vertically with 3 driven rollers 3 rollers motor-driven Upper roller adjustment hydraulic Hydraulic force: 8 tons Rollers are hardened Left/right operation via foot pedal Shaft diameter: 50 mm Roller diameter: 162 mm Speed: 4.5 m/min Motor power: 1.1 kW Electrical connection: 400 V According to CE standards Weight: 510 kg Klsdjum R U Aopfx Aausr Dimensions (L x W x H): 810 x 950 x 1500 mm Performance table: see PDF file

Būklė: naujas, Technical data: Capacity: 200 t Installation height: 900 mm Maximum working area: 1300 x 450 mm Piston stroke: 400 mm Advance speed: 6.4 mm/s Return speed: 11.04 mm/s Motor power: 7.5 kW Width: 2,100 mm Depth: 1,200 mm Height: 2,850 mm Weight, approx.: 2,600 kg Equipment: - Laterally adjustable cylinder via rack and pinion with handwheel - Generously sized working area - Height-adjustable table - Torsion-resistant design with welded steel construction - Pressure gauge - Fine pressure adjustment - Additional hand pump Your benefits: - One of the heaviest-duty designs on the market - Available with capacities up to 500 tons - Maximum performance and stability - Different frame widths available upon request - Hydraulics cylinder can be freely positioned horizontally, handwheel, rack and pinion (from 160 t) Available with special equipment: - Fine pressure adjustment Kjdspl T Diopfx Aaujlr - PLC control - Worktable with T-slots for clamping irregularly shaped components - Lateral hydraulic cylinder adjustment Support prisms available at extra cost.

Būklė: geras (naudotas), Gamybos metai: 1999, Pneumatic press, manufacturer SCHMIDT, type: ZHS-2/22, year 1999. Equipped with two-hand operation. Kjdpfx Aeiduvcjauslr Safety inspection (UVV) valid until 2023.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2018, pjūklo disko skersmuo: 550 500 mm, The machine is in perfect technical condition and has seen very little use. Designed for processing aluminium and PVC profiles. Mitre cuts are possible in 3 planes, and it can be used as a notching saw; manual adjustment of the horizontal saw blade by up to 20 mm in front of the vertical blade is possible. Cutting options: rectangular, single-sided mitre, double-sided mitre, and three-sided mitre cuts. Suitable for processing profiles up to 300 mm, with width at 90° up to 90 mm, and mitre angles up to 30°. Horizontal notching depth up to 185 mm, vertical up to 210 mm at 90°. Cutting width at 90°: 300 mm, profile height: 280 mm. Manual adjustment of cut and height, positioning via mechanical digital displays. Vertical blade swing range: 30°–90°–30° (front/centre/rear), adjusted manually and positioned using a digital display. Vertical blade swing range also 30°–90°–30°, manual, with positioning via digital display. Material stop (table top) can be manually rotated left and right within 30°–90°–30° and positioned using a measurement scale. Material depth stop is manually adjustable via sliding carriage and hand clamp, positioning via digital display. Ksdpfx Aajvtarnjuelr