Pakrovimo ir iškrovimo sistemos

RBO WINNER C

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 2 horizontal upper support beams (on which the carriage glides) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal metal arms with adjustable vacuum suction cups OPTIONAL: No. 2 external roller conveyors (floor-mounted) for loading stacks of panels onto the loading station No. 1 external motorized roller conveyor (for receiving panels from the loading station) Ihodsflc T Sjpfx Af Iet Separate electrical control cabinet Electronic control system Perimeter safety fence with safety mats Total connected load: 17.7 kW Operating capacity (cycles / min): approx. 16-20 Panel thickness (min/max) mm: approx. 10-50 Min. panel dimensions mm: approx. 250 x 320 Max. panel dimensions mm: approx. 1200 x 3000

Sąlyga: naudotas, SANDWICH PANEL PRODUCTION LINE FOR DOORS AND WALLS UP TO 610 MM WIDTH, manufactured by METECO This sandwich panel production line is designed for manufacturing door and wall panels up to 610mm in width, with an annual capacity of 1,500,000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1,500,000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum coil weight: 10 tons Maximum external coil diameter: 1400 mm Internal coil diameter: 508 mm Maximum sheet width: 610 mm Maximum panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Upper Sheet Processing Section - 10T top decoiler with coil car - Roller and pinch feed - Upper coil steel frame - Polyethylene film applicator - Embossing machine for texture patterns - Decorative pattern press - Upper roller forming machine (12 stands) - Upper steel frame for forming machine - Upper sheet guide 2. Lower Sheet Processing Section - 10T double bottom decoiler with coil car - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roller forming machine (12 stands) - Roller conveyor - Operator desk for entry line 3. Panel Forming Section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant Ijdpfx Afovtpcio Ioht - Foam portal - Foaming cabin - Side sealing and tape applicator system - Double-press conveyor - Double-belt heating system - Double-belt press - Outfeed roller conveyor - Cutting saw - Soundproof cabin - Dust extraction unit - Operator control station 4. Stacking Section - Automatic panel tilting unit - Stacking conveyor - Outfeed conveyor - Packing section - Spacer-feeder polystyrene system - Infeed conveyor - Packing machine - Outfeed conveyor - Packing machine 5. Panel Production Equipment - Upper roll forming tools - Lower roll forming tools 6. List of Additional Machines - Station for containers: polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Line speed: 12 m/min Thickness: 40-80 mm Maximum coil weight: 10 tons Maximum external coil diameter: 1400 mm Internal coil diameter: 508 mm Maximum sheet width: 610 mm Maximum panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1,500,000 m panel/year

Sąlyga: labai geros būklės (naudotas), GANTRY LOADER with DOUBLE LOADING STATION Vacuum system (with its pump) No. 4 vertical columns supporting the upper crossbeam No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley to which horizontal arms are attached No. 2 adjustable horizontal metal arms with vacuum suction cups No. 2 floor-mounted rollers for feeding panel stacks into the Loader No. 1 motorized roller table (delivering panels to the Unloader), with additional cross motorized conveyor belts (at 90°). Dimensions approx. 7,232 mm Separate electrical and control panel OMRON electronic controls Perimeter safety and protection metal fences Isdod Rg Dpspfx Af Isht Working capacity (cycles/minute): approx. 16 - 20 Minimum/maximum board thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1,200 x 3,200 mm Installed power: 23.3 kW

Sąlyga: geras (naudotas), Various heavy-duty roller conveyors, suitable for use as casting or cooling lines, immediately ready for operation Ihedpfxed Tx Aho Af Iot

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Double edger and trimming circular saw with electronic control, consisting of: RET alignment and infeed table. Chain bed in front of the machine with liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Pass-through width 1000 mm. Cutting height 125 mm. Feed rate frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment is hydraulic, electronic positioning control with the following setting options: stepless, cm indexing and switchable to 2 cm indexing. Cutting width between the flanges 24 - 440 mm. 10 configurable fixed dimensions, direct input of dimensions in mm. Constant dimension addition, shrinkage addition by percentage. Spreader wedge pair 1x zero line, 1x separately hydraulically adjustable, with electronic positioning control. Spreader wedge opening 48 - 600 mm. Chain bed on the cutout side. 90 kW motor with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 splitter blades. Electrical control cabinet with power section and PLC control. Operator panel. Lath bushing with 403 mm clamping length. Adjustable and zero bushing. Properly dismantled and loaded free on truck. Iedpfx Afown D Izj Ioht

Sąlyga: labai geros būklės (naudotas), Coating and packaging line with thermoregulated shrink film, consisting of: a) Double conveyor belt (3000 mm x 1100 mm) for the application of corner protection devices. - Adjustable feed speed from 3 to 15 m/min. Ijdpfx Afsgp Diae Ieht b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt - Total machine length (with motorized conveyor) approx. 7600 mm - Reel holder (6 upper reels max. width 2450 mm + 6 lower reels max. width 1450 mm) - Cutting and cross sealing machine (2500 mm) - Max. usable height 700 mm - Installed power 12 kW - With automatic device for packaging lightweight parts (from 1 to 5 kg) using sealing bar c) Heat shrink tunnel - Total length approx. 4700 mm (of which approx. 3700 mm is tunnel) with hot air circulation (heated by electric resistors and fan), total installed power kW ? - Conveyor with metal rods (width approx. 1500 mm) - Max. usable height 700 mm - Adjustable feed speed from approx. 4 to 20 m/min d) "ELME" outfeed roller conveyor (idle rollers) for cooling (from approx. 3000 x 1500 mm)

Sąlyga: labai geros būklės (naudotas), ONE-SIDED DESTACKING STATION - Upper traverse, horizontally shiftable by 180° - Console table with vacuum clamps - Lift table (internal) with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operating panel - External roller conveyor for transporting the stack of sheets from destacking - External driven roller conveyor from destacking, optionally with belt for 90° transfer of sheets - Operating capacity (cycles/min): 12-15 Ihedpocggy Sofx Af Iet - Plate thickness (min/max) mm: 10 - 40 - Min. plate dimensions mm: 250 x 320 - Max. plate dimensions mm: 1200 x 3000 - Total connected load Kw: 10

Sąlyga: visiškai atnaujintas (naudotas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, equipped with fast automatic handling system. Comprising the following machines: A) LOADING STATION “RBO” Winner C 3200 with dual pick-up and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for panel stack infeed to the loader. B) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units Iedpodfgg Iofx Af Isht D) 2nd AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° G) UNLOADING STATION “RBO” Winner SC 3200 with dual pick-up, double stacking station, and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for outfeed of panel stacks from the unloader.

Gamybos metai: 1980, Sąlyga: geras (naudotas), Stellite Tipping Machine VOLLMER GF10U Blade thickness: 1 to 4 mm Ijdpegxb Ebsfx Af Ioht Bandsaw blade width: 60 to 420 mm Circular saw blade diameter: 300 to 1,200 mm Electric feed drive via gear motor

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (with sliding carriage) No. 1 motorized carriage with horizontal metal arms External roller conveyor (at floor level) for feeding the stack of panels to the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Ijdpfx Afefi Tg He Ioht Perimeter safety fence with safety mats Operating capacity (cycles / min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30