Sunkiosios tekinimo staklės

Ravensburg KT 600

Sąlyga: geras (naudotas), Gamybos metai: 2000, Staklės parduodamos be įrankių laikiklių ir jokios papildomos įrangos. Ranka parodytos dalys nepridedamos. Techninės detalės pavaizduotos nuotraukoje. Cjdpfx Ahow Tc S Uj Sjgn

Sąlyga: naudotas, Gamybos metai: 1952, Technical details: Swing diameter over bed: 1000 mm Swing diameter over cross slide: 520 mm Turning length: 2500 mm Cross slide travel in z-axis (plan): approx. 500 mm Top slide travel in z-axis: approx. 300 mm Centre height: 300 mm Spindle bore: 90 mm Speed range: 3.2 – 382 / 22 steps rpm Feed range x-direction (longitudinal): 0.213 – 2.67 / 36 steps m/min Feed range y-direction (transverse): 0.070 – 1.11 / 36 steps m/min Tailstock quill taper: MK 6 Total power requirement: 22 kW Approx. machine weight: 8.2 t Approx. machine dimensions (LxWxH): 5.3 x 1.6 x 1.6 m Transport dimensions: approx. 5.5 x 1.7 x 1.6 m Equipment: Face plate Ø 1000 mm 4-way tool post Codpsu Tq U Iofx Ah Ssgn Steady rest Ø 250 mm, closed Accessories: Four-jaw chuck Ø 630 mm

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: SK 40 - Spindle drive power: 12 kW - Spindle speed: 12,000 rpm LINEAR AXES - Travel X/Y/Z axes: 510 x 510 x 460 mm TILTING AXIS A - Travel: [degrees] - Minimum resolution: 0.001° TILTING AXIS B - Travel: 360° - Minimum resolution: 0.001° TOOL CHANGER - Tool changer type: Bras loader - Number of tools in magazine: 40 TABLE Csdouhbr Hspfx Ah Sogn - Table size: 400 x 400 mm - Max. table load: 300 kg - Max. machinable diameter: 500 mm - Max. machinable height: 405 mm PALLET CHANGER - Pallet size: 400 x 400 mm - Number of pallets: 2 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 50 kVA WEIGHT AND DIMENSIONS - Machine weight: 11,500 kg MACHINE HOURS - Operating hours: 32,763 h EQUIPMENT - Control system: Mazatrol PC-Fusion 640 - Teach-in programming - Interfaces: RS232/RJ45/PCMCIA - Synchronized thread cutting - Coolant tank * with high-pressure pump: 15 bar - Internal coolant supply (IKZ) - Spindle cooling - Chip conveyor: MAYFRAN - Tool measuring probe system

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 52.693.00, padavimo ilgis X ašis: 1 525 mm, padavimo eiga Y ašimi: 1 525 mm, Y ašies padavimo greitis: 1 m/min, padavimo greitis Z ašis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot 6 axes Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Cjdpfsrl S Ufox Ah Sjgn Note: The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000

Gamybos metai: 1990, Sąlyga: geras (naudotas), CNC 4th Axis Manufacturer: NIKKEN Model: CNC-200, Year: 1990 Cedpfegabu Uox Ah Segn Including tailstock and base plate.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2003, Weiler E50 x 1000 Precision Lathe (2003) Manufacturer: Weiler Model: E50 x 1000 Cgjdpfx Aexd Tiksh Son Year of manufacture: 2003 Condition: good, used, powered Operating hours: 43,000h Technical data: see images. Scope of delivery: - Original documentation - Rota S Plus 250-62 chuck - Steady rest - Parat 4-position tool turret

Sąlyga: geras (naudotas), Gamybos metai: 2013, BAR FEEDER TRAUB A 25 2013 Turning length: 65 mm Total power requirement: 2 kW Cgodpfxewc Amxs Ah Sjn Machine weight approx. 0.7 t Space requirement approx. 1200 x 700 x 1600 mm Thread length: 40 mm Max. part length: 65 mm Motor speeds: 1400–2800 rpm Bar loader included!

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, bendras ilgis: 620 mm, Mechanics: All wear parts of the machine are replaced, including the feed spindle on the X-axis. All assemblies are restored to a like-new condition. After the overhaul, the machine is comparable to a new unit. Geometry: The machine is completely disassembled down to the guideways. Before the geometry of each table and assembly is restored, both the X and Z-axis guideways are hand-scraped and restored to like-new condition. Upon completion, the machine receives a measurement protocol according to the manufacturer's specifications. Painting: After the machine's geometry is restored, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and repainted. Cgedsurw Uyjpfx Ah Son Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also fully overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Machine Specifications: Technical Data: Centre height: 150 mm Centre distance: 680 mm Grinding length: 620 mm Machine Weight and Dimensions: 2,500 kg // 2340 x 1445 x 1900 mm Machine Equipment (Standard): 1x Workpiece headstock MK5 1x Operator panel 1x Mount for internal grinding spindle 1x Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1x Hydraulic unit Optional: - 2-axis digital readout system - Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds possible upon clarification of technical details) - Separate low speed for part alignment

Sąlyga: naudotas, Gamybos metai: 1997, X ašies eiga: 3 708 mm, Y ašies eiga: 1 208 mm, Z ašies eigos atstumas: 1 002 mm, padavimo ilgis X ašis: 5 000 mm, padavimo eiga Y ašimi: 5 000 mm, padavimo ilgis Z ašis: 5 000 mm, greitas poslinkis X ašimi: 15 m/min, greitas poslinkis Y ašis: 15 m/min, greitasis eiga Z ašyje: 15 m/min, veleno greitis (maks.): 3 000 aps./min, veleno greitis (min.): 35 aps./min, CNC Bed Type Milling Machine - Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC Control: HEIDENHAIN TNC 426/430 Technical Data: X-axis travel: 3708 mm y-axis travel: 1208 mm z-axis travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35 - 3000 rpm Spindle motor: 22 kW Feed range: 6 - 5000 mm/min Rapid traverse: 15 m/min Machine weight approx. 19.5 t ADDITIONAL INFORMATION Cjdswtpfpopfx Ah Segn Electronic handwheel Automatically swiveling milling head vertical/horizontal +/- 120° (infinitely variable) Milling head can be swiveled automatically in the rear axis / rotation 90° Coolant system Machine can be inspected under power. Availability: immediately Sale from location Westerkappeln Dismantling and loading can be arranged on request.

Sąlyga: naudotas, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Spindle taper internal MK 4 Table diameter 160 mm Table bore diameter 75 mm Cgodpfx Asu Uu S Toh Son Strokes per minute 355 – 630 Feed range 0.008 – 0.4 mm/stroke Space requirements approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg Year of manufacture: approx. 1970 Hydraulic clamping on table Change gears