PIRKINIŲ SUJUNGIMO MAŠINA
RAUTE C2000 - 2615 - 1R70003

Name: RAUTE C2000 - 2615 - 1R70003
Brand: RAUTE
Availability: InStock

Būklė

Naudotas (visiškai funkcionalus)

Vieta

Moglia

PIRKINIŲ SUJUNGIMO MAŠINA RAUTE C2000 - 2615 - 1R70003

Duomenys apie mašiną

Mašinos pavadinimas:: PIRKINIŲ SUJUNGIMO MAŠINA

Gamintojas:: RAUTE

modelis:: C2000 - 2615 - 1R70003

Būklė:: geras (naudotas)

Funkcionalumas:: visiškai funkcionalus

Kaina ir vieta

Vieta:: Via dell’Artigianato 1/3, 46024 Moglia, Italia

Skambinti

Pasiūlymo informacija

Skelbimo ID:: A18200826

Atnaujinimas:: paskutinį kartą atnaujinta 10.01.2025

aprašymas

The machine consists of:
1. Infeed conveyor belt for the sheet to be joined
- Dimensions: 3200 x 2000 mm
- Power: 2 kW
2. Lifting table
- Dimensions: 3200 x 2000 mm
- Load capacity: 5000 kg
- Power: 4 kW
3. Conveyor belt for loading empty pallets
- Dimensions: 3200 x 2000 mm
- Power: 2 kW
4. Vacuum sheet loader for optimization VTSA 3800
- Length: 3200 mm
- Infeed speed: 55 m/min
- Power: 5 kW
5. Roller feeder VTSM 3800
- Length: 3200 mm
- Power: 1.5 kW
6. Angle transfer section with rollers and belts KS4 - 5400
- Length: 3200 mm
- Width: 2000 mm
- Power: 2+2 kW
7. Conveyor belt for sheet alignment on the lateral register PKP
- Length: 3000 mm
- Power: 4 kW
8. Chain conveyor belt for sheet pinching
- Length: 2000 mm
- Power: 5.5 kW
9. Camera for material inspection and optimization OK P
- Analyses the sheet and sends cutting commands (head cut, tail cut, hole cut, etc., according to operator-set parameters)
- Sheet thickness control unit
10. Dough cutting unit
- Hydraulic control
11. Waste selection unit (integrated in an under-belt)
12. Splicing unit with hot-melt wire
- Number of splicing wires: 6
13. Guillotine for cutting the joined sheets to size
- Hydraulic control
Kjdpjvnri Ijfx Afnolu
14. Stacker for discharging the joined sheets
- Length: 3200 mm
- Width: 2000 mm
- Power: 3 kW
15. Lifting table
- Length: 3200 mm
- Width: 2000 mm
- Load capacity: 5000 kg
- Power: 4 kW
16. Conveyor belt for pallet discharge
- Length: 3200 mm
- Width: 2000 mm
- Power: 2 kW
17. Conveyor belt for loading empty pallets
- Length: 3200 mm
- Width: 2000 mm
- Power: 2 kW
18. Waste discharge conveyor for trim offcuts
- Power: 4 kW
19. Mechanical cutter for scrap shredding

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.

Tiekėjas

Registruotas nuo: 2025

5 Skelbimai internetu

Skambinti

Siųsti užklausą

Telefonas & Faksas

+39 0376 ... skelbimai

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Sükösd

1 046 km

RP medienos džiovykla
RPNF28

47 000 €

~~60 000 €~~

Fiksuota kaina plius PVM

Skambinti

Mažas skelbimas

Calolziocorte

1 457 km

Sraigtinė gamybos mašina
EW MENNGW 63

Skambinti

Būklė: naujas, Gamybos metai: 2024, veleno ilgis po galvute: 80 mm, sriegio ilgis: 55 mm, važiuojamoji greitis (maks.): 480 mm/min, E.W. MENN GW63 Flat Die Thread Rolling Machine with Rack-Type Dies Kjdot Uucajpfx Afnslu Completely overhauled as new. New guides, vibrator, and new vibrating discharge system. New electrical system with inverter and PLC control. Thread size: M8 x 80/55 mm. Production rate: 480 pieces per minute. Thread diameter (min./max.): 3 - 8 mm. Die length: 115/130 mm. Available for inspection and testing at HBR Srl - Calolziocorte (LC).

Peržiūrėti detales

Mažas skelbimas

Skaitmeninis spausdintuvas konica minolta MGI JET VARNISH 3D EVO F.TO 75X120

Falconara Marittima

1 490 km

Skaitmeninis spausdintuvas
konica minoltaMGI JET VARNISH 3D EVO F.TO 75X120

150 000 €

VB plius PVM

Skambinti

Būklė: naudotas, Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, rezoliucija (maks.): 360 DPI (taškų colyje), popieriaus plotis (min.): 290 mm, popieriaus plotis (maks.): 750 mm, popieriaus aukštis (min.): 360 mm, popieriaus aukštis (maks.): 1 200 mm, Skaitmeninė šilkografijos mašina su karšto štampavimo įrenginiu. Įrengta 2019 m. Spausdinimo formatas: min. 29x42 cm, maks. 75x120 cm. Puikios būklės. Kedpjxrz T Tsfx Afnelu

Peržiūrėti detales

Mažas skelbimas

Mobilus smulkinimo įrenginys Doppstadt Inventhor Type 6

Calbe (Saale)

876 km

Mobilus smulkinimo įrenginys
DoppstadtInventhor Type 6

Skambinti

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, veikimo valandos: 208 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 24 740 kg, transporto plotis: 2 540 mm, transporto ilgis: 9 141 mm, transporto aukštis: 3 604 mm, galia: 260 kW (353,50 AG), Equipment: Basic Package Inventhor Type 6 - Load-sensing system - Fuel tank: 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally positioned wear strips - 24 V electric control system including an additional electric pump to operate the following functions when the engine is off: "Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" - Complete radio remote control - Large side-mounted GRP maintenance doors - Easy-to-service engine compartment - LED lighting package: engine compartment and rear section - Hydraulically reversible fan - Three-way loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning device - Doppstadt telematics system - Paintwork: RAL 2011 deep orange Ksdpfjxd T Hcox Afnslu Additional Equipment: - 260 kW drive train - EV - 3-axle drawbar trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic connection 35 - 80 l/min - Hydraulic drive system - 350 mm hopper extension, sprinkler system on both sides - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date to be agreed

Peržiūrėti detales

Mažas skelbimas

Bio QZ900 / Universalus smulkintuvas MeWa Recycling Anlagen Bio QZ900

Grosseto

1 659 km

Bio QZ900 / Universalus smulkintuvas
MeWa Recycling AnlagenBio QZ900

28 000 €

Fiksuota kaina plius PVM

Skambinti

Mažas skelbimas

Pilna faneros gamybos linija Angelo Cremona SFH 2700

Moglia

1 463 km

Pilna faneros gamybos linija
Angelo CremonaSFH 2700

Skambinti

Būklė: naudotas, Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Complete line consisting of: 1. Angelo Cremona Peeling Lathe – detailed description available below 2. Angelo Cremona Dryer – description and photos available in listings 3. CMP Press – description and photos available in listings 4. Imeas Sander – description and photos available in listings 5. Raute Composer – description and photos available in listings PEELING PLANT consisting of: Centering Loader 1. model CE08 2. Angelo Cremona 3. Positions logs for loading onto the peeling lathe 4. Power supply 400Vac/50Hz – 50kW Maximum hydraulic pressure 100 bar Compressed air consumption 0 L/min Weight kg Maximum dimensions 600x300x400 5. Output capacity 4 logs per minute Peeling Lathe 1. model SFH870 2. Angelo Cremona 3. Produces a continuous sheet of veneer by turning the log 4. Power supply 400Vac/50Hz – 240kW Maximum hydraulic pressure 100 bar Compressed air consumption 10 L/min Maximum dimensions 600x400x300 Kjdpevm An Eofx Afnjlu 5. Production capacity 50 cubic metres per shift Cutting and Sorting Line 1. model TSR27 2. Angelo Cremona 3. Conveys the peeled ribbon to the guillotine for optimized sheet cutting 4. Power supply 400Vac/50Hz – 70kW Maximum hydraulic pressure 100 bar Compressed air consumption 0 L/min Maximum dimensions 300x200x200 5. Production capacity 50 cubic metres per shift Grading Line and Vacuum Stacker 1. model LTR27 2. Angelo Cremona 3. Separates and stacks recovery sheets from full-format sized sheets 4. Power supply 400Vac/50Hz – 180kW Compressed air consumption Maximum dimensions 300x1300x500 5. Production capacity 50 cubic metres per shift

Peržiūrėti detales

Mažas skelbimas

Mantua

1 449 km

Pjaustymo pjūklas
StromabPS 50/F

Skambinti

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 500 mm, pjovimo aukštis (maks.): 145 mm, pjovimo plotis (maks.): 510 mm, bendras svoris: 400 kg, ekstrakcijos antgalio skersmuo: 150 mm, sukimosi greitis (min.): 2 800 aps./min, galia: 5,5 kW (7,48 AG), Pendulum Cross-Cut Saw STROMAB PS 50/F Brand NEW Specification: • Condition – new • Motor power – 5.5 kW • Blade diameter – 500 mm • Motor shaft diameter – 30 mm • Motor speed – 2,800 rpm • Maximum cutting width – 510 mm • Maximum cutting height – 145 mm • Additional extension tables – 2 x 2 m • Weight – 400 kg • Year of manufacture – 2024/2025 • Noise emission – 85.5 dB(A) • Machine complies with CE standards Additional Information: • Tables shown in the photos are included with the machine (2 x 2.0 m) • Available within 7–10 working days Kjdpfordwm Tsx Afnelu • Stated price does not include VAT or shipping costs

Peržiūrėti detales

Mažas skelbimas

Kanzach

1 262 km

Pirštų sujungimo linija
NKT

Skambinti

Gamybos metai: 2002, būklė: dilaminuotas dirbtuvėje (naudotas), Fully Automatic Finger Jointing Line: Type Doppel-Pack with Automatic Feeding with Multiple Cross-Cut Saw with Stacking Unit Specification: Wood Infeed Length: min. 150 mm max. 1000 mm Kledpeg D Ugksfx Afnsu average 400 mm Wood Cross-Section: min. 20 x 40 mm max. 80 x 180 mm Wood Outfeed Length: 6030 mm Max. Wood Cross-Section with 10 mm Finger Length: Hardwood 120 cm² Softwood 150 cm² Finger Joint configuration: vertical and horizontal Type of Glue: PVAC white glue, double-sided glue application Electrical Power: Connection Voltage: 400 V Control Voltage: 24 V 50 Hz System completely wired up to the control cabinet. Finger length, possible wood cross-section, and glue type can still be adapted. Performance: 6 milling tables/min Working Height: 960 mm Table Width: 600 mm Glue Application: double-sided application Technical Parameters: Input Material: Input Length of Parts (min. - max.): 150-1000 mm Part Width (min. - max.): 40-155 mm Part Thickness (min. - max.): 20-80 mm Working Height: 960 mm Bundle Width: 600 mm Glue Application: double-sided application

Peržiūrėti detales

Mažas skelbimas