Pjūklas, sujungimo pjūklas, sujungimo linija, padavimas ir nuėmimas

RANDEK SPL 728 SPL728 + Abstapelvorrichtung

Sąlyga: naudotas, Gamybos metai: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, regularly serviced (last service by Homag in 11/2024) Equipment and technical data: Minimum workpiece thickness: 12 mm Maximum workpiece thickness: 60 mm Nksdpewx Aaqefx Af Ist Minimum workpiece size (L×W): 240 × 55 mm (at 22 mm thickness) / 100 mm (at 60 mm thickness) Minimum edge thickness: 0.3 mm (coil material) / 0.4 mm (strip material) Maximum edge thickness: 3 mm (coil material) / 20 mm (strip material) Feed speed: infinitely variable, 18–25 m/min (frequency controlled) Adhesive type: EVA hot-melt glue Adhesive application (pot / cartridge / nozzle): Melt unit with granulate container Adhesive volume / cartridge size: Granulate container, melting capacity 18–35 kg/h, level controlled Heat-up time: approx. 8–10 min Edge magazine (positions): 2 rolls (automatic roll change) Automatic edge change: yes (automatic via PC22, manual switching possible) Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment End trimming: Kapp unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel/straight) Flush trimming: via pre-milling unit, pneumatically adjustable Radius milling: FK13 contour milling unit, automatic 8-position tool changer (R = 2 mm) Bevel/profile milling: yes, via FK13, pneumatically adjustable Scraper: integrated in multi-finishing unit MN21 Polishing: buffing unit in finishing unit FA11 Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW Workpiece pre-heating: available Release agent spraying device: above / below, Type 2929 (F.01) Extraction ports: several Ø 100 mm (individual extraction for each unit) Control system: power control PC22 (industrial PC, woodCommander on Win XP embedded) Operating voltage: 400 V, 50 / 60 Hz CE / standards: CE compliant according to EC Directive 98/37/EC Dimensions / Space requirement: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system shown in the photos is not included in the scope of delivery! Availability: short notice Location: 63934 Röllbach

Sąlyga: naudotas, A.COSTA LEOPARD Multiblatt-Auftrennsäge mit Doppelwelle - Maximale Schnitttiefe: 200 mm - Breite des Förderbands: 350 mm - 2 x 55 kW / 75 PS - Gewicht: ca. 5 Tonnen Nodpsvf Dagjfx Af Iekt

Sąlyga: naujas, Gamybos metai: 2025, Firebox output: 510 kW Working output: 407 kW Nkedpfx Ajk Utrwsf Iot New device, original packaging: Yes Flue outlet diameter: 250 mm Warm air supply ducts: 4 x 350 mm Firebox length: 1900 mm Firebox width: 900 mm Firebox height: 900 mm Air delivery: 26,000 m³/h Power consumption: 4,500 W Designed for room volume: 8,000 m³ Area to be heated: 1,800 m² Oven height without warm air ducts: 3,000 mm Oven width: 1,220 mm Oven length without flue gas fan: 2,700 mm Weight: 1,575 kg

Sąlyga: naudotas, Gamybos metai: 2014, Herma automatinė etiketavimo mašina Nkedpfjvb Ntkjx Af Iot

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Set for producing finger-joint connections for medium and large-scale production. The machine is technically efficient and in good condition. The set includes several tool kits. Characteristics: – Industrial set with one tenoner. Batch feeding under operator supervision enables processing of lower grade raw material as well, – Operation controlled by microprocessors (automatic control), – Batch rotation after each operation on a rotary table (straight finger-joint connection) or tilting the batch rearward (furniture joint on a line; unique GOMA solution), – The set includes an automatic loading station for the press, – Possibility to use mid-cutting on the press, TENONER WITH FEED TABLE Specification Values Nkjdpfxelu D Tfo Af Ijt Milling spindle diameter 50x210 mm Spindle speed 6000 rpm Motor 18.5 kW Tool dimensions 250x160 mm Saw spindle for end trimming Special chipper 300x8 mm Motor 6 kW / 3000 rpm Stepless feed table Working width x height 600 x 30-160 mm Glue nozzle outline according to tool FC-10 PZ6/2 PRESS Specification Values Board width 30-160 mm Board thickness 20-70 mm Finished board length 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic pump 3 kW / 140 bar

Gamybos metai: 2011, Sąlyga: beveik kaip naujas (naudotas), For sale is 1 roller conveyor including one geared motor each: Technical data: Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Nkedpfx Afjihpn Ne Ijt Load capacity: up to 4 tons Geared motor per conveyor: SEW-EURODRIVE R87 DREE90L4 (for more details, please refer to the type plate in the photo) Three out of four roller conveyors are equipped with a continuous wooden side wall along the entire length, while one conveyor features a lateral wooden wall over a length of 5.20 m. Two out of the four conveyors are each fitted with 3 lateral removal systems. (see pictures)

Gamybos metai: 2022, Sąlyga: naujas, Altendorf WA 6 Manual height adjustment, Double roller carriage, length 2000 mm Scoring unit, tilt function, outrigger table, angle-mitre fence, Nkjdpfx Afoihahmj Ijt automatic brake, can be lowered below table level ----- Technical Data ----- Tilt range: 0 - 45°, Cutting width at rip fence: 1,000 mm, Max. cutting height: 87 mm, Max. saw blade diameter: 315 mm, Mitre fence swivel range: up to 49°, Speeds: 4,200 rpm, Main motor power: 5.5 HP / 4 kW, Scoring motor power: 0.5 HP / 0.37 kW, Working table height: 910 mm, Extraction ports diameter: each 1 x 100 / 50 mm, Weight: 450 kg Large extraction hood Location: Ex stock 54634 Bitburg - Immediately available - Location: Ex stock 54634 Bitburg - Free loaded - - Immediately available -

Sąlyga: geras (naudotas), Gamybos metai: 1990, RANDEK SP700 Crosscut Saw Manufactured by Randek, Sweden Year of manufacture: 1990 In good condition The SP700 series by Randek is a reliable saw designed for roof truss and house manufacturers worldwide. The SP700 saw is efficient, easy to operate, and highly accurate. It has been on the market for a long time and is continually improved based on close cooperation with numerous customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all required cuts. The large saw blade diameter (700 mm) enables you to cut multiple pieces from wood stacks simultaneously. Nksdpfeh Ayyqjx Af Iot - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Timber clamping near the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Discharge roller conveyor: 4.10 m Complete line: 11.5 m Technical information subject to change/errors excepted

Sąlyga: naujas, Cutting capacity at 90 degrees: round 350 mm Nedpfx Afofg E Hlj Iokt Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Space requirements: approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double mitre band saw K-tech DG 50/33 HA-I - 2-column mitre saw - Robust yet easy to operate - Material height sensor (Automatic cut start detection) - Smooth operation thanks to mitre cut, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration through mitre cut - Ergonomically designed, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min - Hydraulic cutting pressure control valve - Hydraulic operation of saw frame and vice - LEDs for monitoring all safety functions - Large-diameter wheels (520 mm) - Clear mitre adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid lowering to the start of the material, or for series cuts, cut immediately 4. Saw blade off 5. Raise frame just above the material 6. Open vice

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, veikimo valandos: 1 h, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 9 100 mm, bendras plotis: 3 600 mm, Mūsų įmonė gamina įrenginius ir sistemas namų prefabikacijos gamykloms. Gaminame stacionarius surinkimo stalus, sukamus stalus, „drugelio“ stalus ir pilnas gamybos linijas. Siūlome naują surinkimo stalą, kurio matmenys 3,6 m x 9,0 m. - Konstrukcija padengta milteliniais dažais - Stalo paviršius dengtas faneros plokšte su smūgiams atsparia danga Nksdpfx Aevv Rv Aef Iet - Angos SD-01 spaudimo cilindro montavimui - Išimami ir reguliuojami ribojimo kaiščiai - Modulinė konstrukcija savarankiškam surinkimui (vienoje paletėje) - Mažos transportavimo išlaidos visoje Europoje