Pjovimo pjūklas

Randek SP700

Sąlyga: geras (naudotas), Gamybos metai: 1990, RANDEK SP700 Crosscut Saw Manufactured by Randek, Sweden Year of manufacture: 1990 In good condition The SP700 series by Randek is a reliable saw designed for roof truss and house manufacturers worldwide. The SP700 saw is efficient, easy to operate, and highly accurate. It has been on the market for a long time and is continually improved based on close cooperation with numerous customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all required cuts. The large saw blade diameter (700 mm) enables you to cut multiple pieces from wood stacks simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Timber clamping near the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Discharge roller conveyor: 4.10 m Complete line: 11.5 m Iedpfx Aoh Ayyqsf Ijal Technical information subject to change/errors excepted

Sąlyga: naujas, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtmotorleistung: 77,12 kW Motorleistung 1. Aggregat: 22 kW Motorleistung 2. Aggregat: 30 kW Motorleistung 3. Aggregat: 18,5 kW Schleifbandabmessung: 1330 x 2200 mm Iaodped H Sc Eofx Af Isl Betriebsdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportabmessungen: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Gamybos metai: 1977, Sąlyga: visiškai atnaujintas (naudotas), I am selling a Rapid DGS double mitre saw, year 1977. Swivelling heads. Drilling heads on each side at the front included. In very good condition. Available immediately. Iajdpfx Aed N Rb Djf Isl

Sąlyga: naudotas, Gamybos metai: 2010, Chalet Construction Machine Used, good condition, low operating hours Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 Iedevwfqqopfx Af Ioal CE type tested Up to 140 mm round timber corner joints Saw: 1x Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Sąlyga: naudotas, Gamybos metai: 2009, Kaina: pagal užklausimą Po stalu montuojama skersavimo pjūklas Weinig Dimter Opticut S 90 Serijos Nr. 4421.24 Pagaminimo metai: 2009 Automatinis padavimas Iki 60 m/min Trifazė srovė 400V / 50Hz Valdymo įtampa 24VAC / 230VDC Galia 20kW Nominali srovė 40A Apsauga 50A Mašinos matmenys 2000x1400x1650 mm (I x P x A) Įvado stalo matmenys 7450x2100x1100 mm (I x P x A) Išvado stalo matmenys 4900x2400x1400 mm (I x P x A) Bendri įrenginio matmenys 16300x2700x1950 mm (I x P x A) Įskaitant aptvėrimą ir išvežimo juostą Iš karto prieinama - Pagaminimo metai: 2009 - Dokumentacija: nėra - CE sertifikatas: nėra - Serijos numeris: 4421.24 Finansinė informacija Iodpfx Afjwhlvge Ijal PVM: nurodyta kaina be PVM PVM/Maržos apmokestinimas: PVM atskaitomas juridiniams asmenims Pristatymas ir keitimas galimi bet kuriuo metu visai pramonės sričiai Yorick Diebels

Sąlyga: naujas, Gamybos metai: 2025, SHAVING MACHINE, brand KÄLIN Hobeltechnik, model MPC-P: • Approximate production of wet shavings: 3,800 kg/hour • Log carriage dimensions: 2,800mm x 1,100mm x 1,300mm • Maximum log length: 2,650mm • 2 symmetrical and removable cutter heads, each 1,140mm, divided into 3 sections: - Diameter: 200mm - Length: 380mm Ijdevk Saxjpfx Af Ijal - Number of knives: 8 - Complete cutter heads can be sharpened without removing the knives SUPER-FAST CUTTER HEAD CHANGE – less than 15 minutes! • 2 extra sets of cutter heads for substitution during sharpening • Cutter head motor power: 90 kW / 120 HP • Carriage speed controlled by ELECTRONIC INVERTER: 0.6 to 36 m/min • Automatic control of the feed-load ratio • 1 feed drive motor, double heavy-duty chain traction: 15 kW / 20 HP • Material level control system in the carriage to prevent running empty • Main electrical panel and control panel with touchscreen functions • Lower motorized conveyor for shavings removal: 5,000 mm x 800 mm • Weight: 11,000 kg • CE compliant

Sąlyga: naudotas, Gamybos metai: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood, featuring automatic detection and removal of wood defects. Technical data: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Iaedpowtgcxofx Af Isl Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Fuse protection: 25 A Condition: used

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, pjovimo ilgis (maks.): 6 000 mm, pjūklo disko skersmuo: 550 mm, Used Emmegi Precision TS2 Emmegi Double Mitre Saw Precision TS2 Year of manufacture: 2014 Cutting length: 6000 mm Double mitre saw with 3 controllable axes featuring automatically movable saw unit and electronic control of all mitres from 45° (internal) to 15° (external) with a precision of 280 intermediate positions per degree. Including: Profile support roller conveyor on movable unit Additional clamping device on the roller conveyor Label printer with dispenser Software PRO (over-length cut, under-length cut, cross cut, wedge cut) Iedjwaz Agopfx Af Ioal Software SLICE (end cuts with variable corners and lengths up to a net cut of 500 mm) Driver for interfacing with external calculation programs.

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1991, Torwegge multirip saw Iedpfx Aoucnukof Ioal Chain width: 250 mm Cutting height: 100 mm Total connected load: 39 kW

Sąlyga: labai geros būklės (naudotas), Beam Cutting Center STROMAB CT800 Beam cutting center for large cross-sections, making it the optimal solution for woodworking and timber frame construction. Thanks to electronically controlled 5-axis technology, it meets all requirements for straight, inclined, and compound cuts. It ensures maximum processing speed and finished product quality, reducing labor input and maximizing production. The CT800 can process beams of any length and cross-sections from 120×45 mm up to 290×280 mm. The beam feeding system features driven rubber wheels and pneumatically tilting upper clamps. Specification: Motor power: 18 kW TCT saw blade: 800 mm Number of electronically controlled axes: 4 Saw table rotation: 0° ÷ 340° Table rotation speed from 0° to 340°: 18" Blade angle: 90° ÷ 45° Positioning speed: 0 ÷ 17 m/min Cutting range: At 90° with single stroke: mm 280×290 / 250×390 / 200×450 At 90° with table movement and repeat cutting: mm 280×770 / 250×840 At 45° with single stroke: mm 200×210 At 45° with table movement and repeat cutting: mm 200×760 Max longitudinal cutting height: mm 300 Iedpfxswtw Avs Af Ijal